I installed Wnidows 7 using boot camp and it is working fine. Now if I install Parallel destop 5.0, do I have reinstall Windows 7 all over again or is there a way that I can use the existing partition by boot camp without having to create a new virtual machine by Parallel desktop ?
View 3 Repliesi'm trying to install the window xp onto my mac using either boot camp or parallel desktop. tried doing it myself, but somehow it just won't work. i was hoping someone would giv me some pointers on how to make this work. one more thing, my window xp is a downloaded version.
View 2 Replies View RelatedI have this little problem. A few months ago, I install Win7 using Boot Camp, and it's a success. However, now i realize that it's too trouble each time I wanna run a app on Windows (gotta reboot my Mac), so I decide to use Paralle Desktop. So I wanna ask if there is a way to run the windows,which was installed by Boot camp , by Paralle Desktop ? 'cause it's suck to remove win7 from Boot Camp, then reinstall it again.
View 3 Replies View RelatedI have MBP 17' early 2011. Need to use SSD for better performance. Just wondering, Will it effect my Parallel desktop Win 7?. Do I need to reinstall windows even if I clone current HDD ?
Info:
MacBook Pro, OS X Yosemite (10.10.1)
I have a problem about sound. It's no output or input device when I install parallel desktop 7. Is there any way that can solve this issue without uninstalling Parallel Desktop?
View 2 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
I wanna install Windows 7 Ultimate with Parallel Desktop 5, but I have some problems. I don't know if I should install it as x86 or x64 or 32-bit or 64-bit? And also, how many GB ram should I be using for Parallels? I have the basic MBP 13" early 2010.
View 3 Replies View RelatedSo my problem is i installed Parallel Desktop, installed windows 7, 64bit and after i installed Lineage 2 (a game that uses Direct3D) i get an error running the game, were it says i need to enable Direct3D in the DxDiag - but when i run the DxDiag it just tell me that info is not available, so there is nowere i can enable Direct3D :/ I have been googling the issue, but i havent been able to find a solution on how to use/enable Direct3D. However the graphic card i have in my MacBook pro is called Nvidia Geforce GT 330M and does support Direct3D so it must be something that happens because of the mac cross to windows 7 thingy. Also i have been trying to installe the latest drivers from Nvidias website, but i also get an error when i try to install them, saying it cant verufy my hardware - so it must be something about windows not beeing able to detect what kind of graphic card i use cause its on a mac system?? Another thing i notcied was in DxDiag i saw under memory, it only see 1 GB of memory and i have 4 GB available not that it changes anything
My setup:
MacBookPro 2010 model
Core i7 intel processor 2.6 Ghz
4gb memory
Nvidia Geforce GT 330M
I have two Virtual Machines running on my MacbookPro. One is Windows and the other is Ubuntu. The Windows 7 system is running perfectly well but the Ubuntu VM has got issues with dragging/dropping files from Mac to Ubuntu and vice versa.When I checked on the Parallel Desktop's forum, the only solution provided was that the Parallel Desktop's tool should be uninstalled and reinstalled; which I have done. But that didn't solve the problem. The Configuration menu "Virtual Machine" offered checkboxes for the (Copy & Paste) section, and I can confirm that both boxes for 'Share Mac Cipboard' and 'Preserve Text Formatting' are checked. That should have solved the copy/paste problem but didn't.
Info:
MacBook
Pro, Mac OS X (10.7.3), (RAM - 4Gb)
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
I want to install XP using Boot Camp but when I run the Boot Camp Assistant I get the following message
Boot Camp Assistant can not be used
You must update your computer's Boot ROM firmware before using this setup assistant.
Now I have tried all firmware updates available on apple site but they say they are not needed, I'm on 10.5.6 and a friend of mine with same firmware runs his boot camp comfortably.
My Boot ROM Version:MB21.00A5.B07
SMC Version:1.17f0
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.
I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.
I have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.
Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.
Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedHave the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
does any ssd allow boot camp to work? which one?
View 3 Replies View RelatedI've installed and reinstalled xp and vista on bootcamp. I've uninstalled and reinstalled drivers. The forums don't help either.
The drivers are all recognized. The only sounds I hear are the noise when windows boots up, and a clicking noise when I mute or unmute the computer. Nothing else. Anybody have any suggestions? Please help
I'm a long time user of PCs but have just bought my first Mac - a new 2010 MacBook Pro 13". I want to replace the hard drive with an SSD, however looking through the threads on this forum have got me worried. The Intel ones seem to have issues with Boot Camp (I want to install Windows 7 x64 on it as well as OSX) and the OCZ Vertex forums have horror stories of Macbooks not booting at all off the SSD (albeit on the 2009 Macbooks).
Is there any SSD that has proven just to work? Ideally it should have garbage collection as well and be 120-160GB but that is my only stipulation.
So after knowing nothing about SSDs I finally ordered this one for my 2010 i5 MBP.
[URL]
I have searched and I know Snow Leopard doesn't support TRIM yet but I was wondering if I use boot camp and install Windows 7 won't TRIM be available then? I can install all the software that came with the SSD under Windows. So my question is if I do that will the Trim feature only work on the Windows 7 partition or the entire drive?
I am trying to install bootcamp and need drivers to get windows xp up and running. Where do I get the drivers from?
View 1 Replies View RelatedI have a MacBook Pro late 2011 with low end spec (Processor: intel i5 2.4 GHz - RAM: 4 GB 1333 MHz DDR3 - VGA: Intel HD Graphics 3000 384 MB) I want to play some games with my macbook like Pro Evolution Soccer 2012.
I've succesfully installed Windows 7 64 bit in my macbook but when I click the game this note appear:
“Warning:Your Computer does not meet the Minimum System Requirements to run this software.As a result, you may experience errors during operation.Your Video Card does not meet the required specifications. (GPU:VRAM 128 MB)”
How come I don't meet the system requirements? It is said that I have 384 MB memory.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
I wanna reinstall windows but I dont have my boot camp discs for the proper drivers is there a place I can download them? thanks in advance
View 1 Replies View RelatedI have searched for a while to no avail about this problem.I have a macbook pro late 2009 with 4gb of ram and a duo core 2.26ghz processor. I can run games like killing floor, guild wars, borderlands, etc., at max settings with no performance issues, but i cant run Divinity II at even the lowest settings.I'm running windows XP service pack 2 and here's the reading i get with the xp
View 1 Replies View RelatedMy current setup is OS X 10.6.3 with Parallels 5 Desktop and Win7 Enterprise. I'd like to purchase the full version of Parallels later today (hopefully I can the license on my Mac Mini & MB legally with updates to the current version).
I have Win7 Enterprise however the VM that its on is part of Parallels 5 Desktop Trail. If I install Boot Camp do I need to install Windows 7 Enterprise all over again? If so I figure the best way to transfer my Win7 User Profile & Apps is to use the built-in Win7 Wizard.
Is it possible to transfer over my VM into Boot Camp in order to run that Win7 natively?
Just got my first Mac last night, MBA 2.13/128SSD. So far it's been a questionable purchase, the two things I need it to do I cannot do with Mac OS X and Safari. Need to use a digital ID for law school which won't install in safari and can't watch Real Player lectures as I cannot enter log in info. Installed Vista Ultimate using Parallels (have not tried VM Fusion) and it works but the videos lag.
I partition 10G in Boot Camp and tried to install (1st) Vista Ultimate, (2nd) XP, (3rd) XP SP2, (4th) Windows 7b, none of them worked. After I set the partition and select to install, the Mac reboots and then the gray Apple screen appears with an Apple Logo and Folder. I've searched for hours on Google and I can't find a single article that answers my question as to why this is happening and how to avoid. I realize I cannot use XP, but Vista Ultimate and XP SP2 and possibly W7 should have done something..
I used Boot Camp to install Win 7 x64 on a partition, and I got the OS and the drivers to work just fine. (I also have it installed on a Parallels Virutal machine, but I needed the dedicated partition for work.)
My only problem is that when I boot into Win 7, I get a screen that has a cursor flashing for about 2 and a half minutes. After that time, the Windows logo appears and it boots just fine. Is this common, or am I missing something here? It behooves me that it takes around 3 to 3 and a half minutes for Win 7 to boot up after hitting the power button.
