MacBook Pro :: Any Diagram That Shows Water Sensors
Jun 3, 2010
Is there a diagram that shows the locations of the water sensors in the 17" MacBook Pro? I don't think I ever had the machine wet (same with iPhone, though they were tripped), but I want to make sure that they are not activated before I spend money on AppleCare.
The new MacBook and MacBook Pro don't just want to impress you with their fancy new fabrication techniques, unibody designs and bolstered performance: they want to make you more honest, at least when it comes to reporting water damage. According to the service manuals, the new line of MacBooks include submersion sensors, designed to indicate if the laptops have been exposed to excessive levels of moisture and/or dropped in your toilet.
Phones, including Apple's own, have been fitted with these little stickers for years, but they're a rarity in laptops. You might want to think twice before you forget to mention the "used as a prop in an elaborate college drinking game" part on your next Applecare claim. [URL]
My trackpad has been messing up lately, as in its not responsive all of the time as it once was. (13in mbp). I have the applecare shipping box ready but am curious as to where the water sensors are located nearest to the trackpad to determine if any water damage has occurred. I have no clue as to whether any liquid may have accidentally gotten in there, but nevertheless would love to check or something.
Last night (laptop was unplugged, off but with battery in) I accidently dropped a small amount of water eg like a cap amount on the keyboard/mouse area.I wiped it off & thought nothing if it as it was a small amount.Woke up this morning, tried to switch it on but nothing. I put in the charger cable but still nothing, then I could smell some burning so quickly disconnected charger & battery.
Anyone know how I can find the moisture damage sensors on a rev b? I need to get a keyboard replaced, but many moons ago a small amount of liquid may have been spilt on this thing and due to 3rd party repairers over here I don't want to take it in and then find out that I owe loads due to it not being covered. So I want to check first to make sure the sensors are not activated.
So today I opened up my MBP to clean it out and stuff (it had a ton of dust... A wall of it had built up where the fans blow out)All is fine and dandy now except for one thing. Since I don't want to open my case up for the second time today (right fan wasn't plugged in all the way first time I started it up... oops x( ) I'm asking here since everything else seems to be fine.
What I did: Opened everything up all the way down to the heatsink.Applied correct amount of Thermal paste.plugged everything back in (right fan wasn't perfect at first, but fixed and stupidly didn't double check everything else while I was in there)
And now both fans are running at 6k (full) constantly. I tried resetting PRAM and SMC with no luck. I'm about to grab my disk 1 and run the diagnosis to see if that turns up anything.Are there any plugs that I might have accidentally not plugged in all the way or at all that would cause this? Also any other suggestions if everything is plugged in correctly?
MacBook Pro 2,2 15.4" late '06 10.6.3 C2D 2.33GHz 2GB Ram
Also, I have iStat Menu. No apps using all my CPU (Mostly <10% usage right now) and temp is mostly <40c right now. All temps have a temperature so I'm assuming all heat sensors are fine.On a great note: My computer is so much cooler now! Even before this at 6k rpm I'd get down to MAYBE 45c if I was lucky.I also have Fan Control installed and it's not having any effect
On pages (Apples version of Microsoft office) how do you insert a venn diagram? I need to know asap because I have a big test tomorrow and it will help me study.
I'm curious - I've taken my ibook apart and replaced hardware that had broken, I have TONS of screws... Can anyone direct me to a diagram, etc. that will inform me of ESSENTIAL screws, if those even exist.
I have a Quad 2.66 Mac pro on the way and I'd like to upgrade the Ram in the smartest and cheapest way possible. Seems to me that 12gb (3x4gb) is the way to go to get a decent amount of memory out of my limited 4-slots. I've checked a few places and here's the pricing I've found.
Memory America - $476.95 Ramjet - 524.99 MacSales - 489.99
all the above specify they have a compliant "apple thermal sensor"
Then there is this ram at newegg for $374.99
[URL]
which doesn't specify the heat sensor, but somewhere else on the forum some one said they popped it in an it worked well without running the fans all the time or other strangeness.
My question is can I save myself 100$ and get the Ram without the sensor and is there anyone currently running that Patriot Ram in a Quad that can shed some light.
By the way I realize getting the octo would have solved these issues, but it wasn't an option.
I've been using intel iMac core2 duo. There are some temperature sensors to HDD, CD/DVD and CPU, etc., I think. Apple computer is well designed for thermal control and is this big advantage for technical point of view ?
I've noticed that occasionally my IR sensor stops working, and no longer responds to changing the volume, skipping the track in iTunes, etc. It can be resolved by going into Security prefs, disabling and re-enabling the IR sensor. This is annoying, however, and I'm wondering if it's a known issue that might be fixed.
I noticed that when you disable and re-enable the IR sensor, the last few remote button pushes you made while it was broken come through in a burst.
My MacBook Pro 13", running on latest update, is showing a completely blue, plain blue, desktop background. It changed all by itself. When I tried to reset it by right clicking on the image I want on my desktop and selecting "Set Desktop Picture" nothing changes. When I go into my settings and try to change it that way, the image I want as my background shows as already being my background, yet my desktop is still blue. Tried rebooting already.
So after doing some research online I see that Aluminum is very resistant to rusting to the fact that it usually rust after your computer die or something...
But anyway what I wanted to know if that if I use water to clean the lid would it accelerate the rusting or corrosion?
I spilled a little water on my macbook screen and I just got a paper towl and wiped it off at first but then I realizewd a little later than it had a spot and if you tilt it you can see like a scratch on the screen.Right now I have it turned off and titled upside down. Should I do this? If yes, how long should I keep it like this? PLEASE HELP ME! I am a nervous wreck and on the verge of tears because my mom will KILL ME if she finds out and I dont want it to be messed up.
I have a Macbook that I was carrying in my backpack in one of those neoprene cases along with my water bottle (silly, I know...but it hasn't ever spilled prior to now!). I walked around for about 5-10 minutes at which point I noticed the bottom of my backpack was wet. I immediately opened it up and found that there was water on the bottom 2 inches of my case. I pulled my computer out and there was sort of a sheen of water on the front and back 2 inches on the side with all the ports. I then wiped it off. The screen came on when I opened it (it had not been off) but I turned it off and now I have it leaning so that if there is any water in the ports it will drain out.
Almost had a heart attack. I was in the other room and she screamed that she spilled water on it. I ran over, grabbed it, flipped it upside down, turned it off, used an air compressor and paper towels to get whatever water out. Let it off an open overnight and everything appears fine.
She can go back to using her 5 yr old hp brick of a laptop. My MBA is off limits. And 2 months ago she broke her ipod (gift from me) running on a treadmill.
Well it wasn't actually spilled. My friend was crying on it. Its hasn't been a good today, but anyways I got a fan on it and a hot halogen lamp on it. So far its doing well. Should I leave the fan and light on the night? I have a 3 year warranty. And I would pry out the battery but I don't have a screwdriver in my dorm!
My MacBook Air was not starting up so I sent it in for a repair. Just got a call that the logic board is corroded and there is excessive water damage. However, I have never split anything on my laptop nor has anyone else. I carry it around with me all the time. I thought at first it might be damage due to a shock as a dropped it a few months ago and it has a slight dent on a corner.
Would my Macbook get water damage if I took it into the shower with me?Now what I mean is would the water damage sensors go off if I left my Macbook sitting on the floor while I have a shower? Would the steam set them off?
I got out the shower n pressed the pause button to stop the music. While that i notice couple of spot of water around my return button just a little. Nothing happened to the computer after using it for about 1 hours. So i left and came home around 7 hours later, got on the macbook air n then it kept prompting the shutdown menu option screen. From there it would just go to constant reboot. Is this due to water damage at all? or is it just a coincidence. Because my black macbook has had way more water on it before n its perfectly fine.
I drunkenly spill wine on my brand new 15" MacBook Pro and get convinced by my (also drunk) girlfriend to submerge the entire thing in plain white rice in order to magically suck the moisture out.The thing won't charge or power on three days of "drying" later. I came across one guy's post that completely taking the laptop apart (guided by an intricate YouTube video) and cleaning the internal components with a special alcohol would solve this nightmare for me. My question:Should I fess up to Apple (who I have ProCare with) or see what an independent repair
Knocked over a glass of water in the dark and a small puddle seeped under my MacBook pro - I quickly covered it I'm a towel and cleaned it up, it was barely wet at all, but when I tried to start it up the screen was blank. I blowdried it and tried again but still the screen is blank - when I boot it up the White light on the front turn on, the computer songs eerily quiet, the light goes off, then comes back on again, stays on and although the computer sounds like it's whirring it's still completely blank.
Since Apple has started putting these water sensors on almost all of their devices now, I am pretty sure that the unibody MBPs have them too (on portions exposed to the external environment; not just on the logic board and internal chasis).
I was wondering if anyone knew where they were located out of curiosity.
I recently spilled water on my macbook pro and found that my left, right arrow and shift keys no longer worked. What I didn't realize is that my power button was affected as well (I tried shutting off my computer a week ago and it wouldn't). So, it usually rests on my desk, charged. Last night, however, I took it off and it discharged. I charged it and found that I couldn't turn it on anymore.
Is there any way to remotely turn on the computer? I was looking into something like a USB keyboard or remote, but can't decide for sure what to do.
I just spilled literally about four drops of water on my trackpad. However it was in the bottom left corner and some may have got through. When I rebooted (I know I panicked should not have turned it on 10 minutes later) It worked briefly and then I could not scroll or click. I have applecare, but I don't think it covers this.