MacBook Pro :: 16gb Memory Upgrade For 13" Early 2011?
Apr 28, 2012
I run parallels a fair bit for research and my MBP is pretty slow. Took it to genius and he said to get a memory upgrade to 8GB. However, I'm reading everywhere that it can handle 16GB and the Crucial says it is compatible (only £100 ish for this so seems a pretty good deal). All well and good- but will this invalidate Apple care as the max Apple state it can handle is 8GB? Or.....is 8GB going to be enough anyway?Â
View 2 Replies
ADVERTISEMENT
Apr 25, 2012
can i fit 2 x 8g memory into my 17" early 2011 macbook pro and will it give me any advanagtes ?
Info:
MacBook Pro (17-inch Early 2011), Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 29, 2012
I have an early 2011 MBP with 4GB RAM installed and i want to upgrade to 8GB but before i do so i have some questions to make. The MBP has 2 RAM slots so my first question is whether the 4GB is 2x2GB or 1x4GB. Will I see any difference in my MBP performance if i do decide to upgrade?the model of the RAM which is compatible with my model.
Info:
MacBook Pro, Mac OS X (10.7.2), Early 2011
View 5 Replies
View Related
May 19, 2012
MB Pro: 8,1 early 2011 - (13') 4G ram: the MB Pro errors when I attempt to install two 4G SO-DIMM modules (description below). I have actually attempted "two new" (OWC) Other World Computing sets of (2x4G), after it was believed one of the first modules arrived bad. The result remains; only one 4G modules works, in the lower slot. The upper/top slot does not accept a 4G module. I have tried two sets with all the possible combinations using an existing 2G and a new 4G. With this present setup all I get is 6G of ram. In addition, I used eraser on the ram, no go. I followed desktop procedure, unplugged battery etc., etc..
Info:
MacBook Pro, Mac OS X (10.7.1), Triple boot: WIN7 & BT5
View 4 Replies
View Related
Feb 24, 2012
I do a ton of video editing (Final Cut Pro) and music production (Logic Pro) as well as photography and the 350G hard drive is killing me. Can I install a larger capacity drive? If so, how do I install the new OS?
Info:
MacBook Pro, Mac OS X (10.7.1)
View 3 Replies
View Related
Apr 8, 2012
I am wondering how much memory I can upgrade with my MacBook Pro Late 2011. I went on Apple.com and they only offer up to 8GB of Ram for my model when I looked around and saw that on OWC ( MacSales.com) which is a very excellent reliable source for all your Apple Products. But, I was able to find a 16GB of Ram for my MacBook Pro Late 2011 and it said it can be used for my MacBook Pro.Basically Apple says its only up to 8GB of Ram while I see other people have 16GB of Ram for the same year as mine but the only difference is the the size of the computer. Anybody could give me a answer with this question as I dont want to buy the 16GB of Ram and it not working for my computer. url...
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
View 3 Replies
View Related
May 1, 2012
Recently purchased a MBP and find the memory of 4 GB fairly small. Â How would it affect the MBP if I were to change the memory to 8 GB...Ie. will it run faster ?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 5 Replies
View Related
Jun 20, 2012
I want to upgrade to the max memory and need to know how much and what type of memory sticks I need.
Memory installed is:Memory 8 GB 1333 MHz DDR3System report:Model Name: iMac Model Identifier: iMac12,2 Processor Name:Intel Core i5 Processor Speed:2.7 GHz Number of Processors:1 Total Number of Cores:4 L2 Cache (per Core): 256 KB L3 Cache: 6 MB Memory:8 GB Boot ROM Version: IM121.0047.B1F SMC Version (system): 1.72f2
Info:
iMac, Mac OS X (10.7.3), 2.7GHz Quad, Core I5, 2x4GB
View 6 Replies
View Related
Apr 4, 2012
I am upgrading to 8GB in myMac mini. I did the trouble shooting( command, option P,R) thing after getting 3 beeps but it didn't work. So I tried one 1GB plus one 4GB to total 5GB and it booted. Â
How can I get 8GB to work? Why does 5GB work and 8GB not work?Â
Info:
Mac mini, Mac OS X (10.7.3), 2011
View 6 Replies
View Related
Jun 12, 2012
I just bought a late 2011 17" MBP with 4GB RAM (standard).Having upgraded to Adobe CS6 I am finding the machine impossibly slow, so I figure I need more RAM. Apple says max = 8GB (2x4), but Crucial Memory recommend 16GB "guaranteed compatible". I'm now quite unsure: can I really put 16GB in? Are Apple wrong? If Crucial have sold loads of 16GB kits that can't be used, surely they'd have taken it off their website? Can anyone confirm whether I can put 16GB (i.e. you've actually done it successfully).I'm running Lion 10.7.4
Info:
MacBook Pro (17-inch Late 2011), Mac OS X (10.7.4)
View 8 Replies
View Related
Feb 14, 2012
I want to know, is it possible to upgrade my MBP to this specs:
1) 16GB RAM (according to this [url] i can do this, but in settings said that MAC has limit of 8GB)
2) 1TB HDD
Info:
MacBook
Pro, Mac OS X (10.7.2), 17' 2,3GHz 750GB HDD
View 1 Replies
View Related
Feb 11, 2012
I have a macbook pro and I wonder if it supports 16GB of RAM memory.Â
Info:
MacBook Pro, Mac OS X (10.7.3), Early 2011
View 1 Replies
View Related
Apr 6, 2012
here is my options :Â CSX,SIQUELL,CORSAIR,CRUCIAL. Which one is the best in your opinion?
Info:
MacBook
Pro, Mac OS X (10.7.3), mountain lion osx
View 6 Replies
View Related
Apr 18, 2012
I bought an used macbook pro early 2011 (i5 2.3) and its not charging. With the battery in it the green light doesnt turn on (doesnt charge at all). If I open the macbook and remove the battery the green light turns on and I can turn on the macbook.I have already bought a new battery and its not charging.Could it be the magsafe board? I am asking because the light goes on without battery so I thought that the magsafe board maybe is working.
View 6 Replies
View Related
Feb 20, 2012
I've been experiencing problems with my 2011 MacBook Pro 15 model with it freezing on me all the time.I have read around and came to a conclusion that it is a logic board problem on the logic board that supports 3 GBs on the superdrive bay.Have any of you had this problem? What did you do to get the problem resolved? I'm going to my local Apple store to try to get this fixed (With the current logic board that supports 6 GBs on the superdrive bay) or get a replacement laptop.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 1 Replies
View Related
Mar 14, 2012
My macbook pro early 2011 doesn't start. On start it stay only on grey screen for hours
Info:
Mac Pro, Mac OS X (10.6.8)
View 5 Replies
View Related
Apr 8, 2012
my early 2011 macbook pro graphics *****. Battlefield 3 lags on low. Exporting videos is slow aswell. Is there anyway to make it work better? For a laptop that I paid 2000 dollars for it should work a lot better than it is.
Info:
MacBook Pro, Windows7
View 11 Replies
View Related
Jun 23, 2012
I am looking to either increase ram or better still if I can afford it, put in a faster processor, my laptop is quite slow....and with more than two programs open, it can sometimes grind to a halt..
Info:
MacBook Pro, Mac OS X (10.7.2)
View 11 Replies
View Related
Sep 2, 2009
I have three 16gb USB memory sticks that don't work correctly with Snow Leopard. Disk Utility is will only format them in FAT32 format and I'm unable to successfully copy files to and from the sticks.
They work perfectly fine under Windows in Boot Camp and also on my Windows based laptop. Sadly, I purchased them after I had installed Snow Leopard and I don't have access to another Mac with an earlier copy of Mac OS X to test them.
Is this most likely a Snow Leopard anomaly do you think or is it just that these sticks are not OS X compatible?
View 3 Replies
View Related
Mar 27, 2012
First off I want to say I've been looking for answers for this on google for a few days, and I've found similar problems but none of the fixes have seemed to help me. Then again I may be doing something wrong. I've recently purchased a 500GB Momentus XT to replace the stock hdd in my early 2011 mbp 13".Originally placed the disk in an external usb 2.0 enclosure and made a clone of my the stock disk. I could boot fine from the momentus xt when being run from the enclosure.
Problems arose as soon as I tried to swap the drives around. Now I could boot fine from the stock drive (in the enclosure) but the momentus XT could not be booted from. I tried swapping the momentus back to the enclosure, and it still worked fine this way. I attempted to reset PRAM and Smc, and it didn't help me.
So I tried to reformat the drive, and to make a partition of 495.11g with the rest being empty space (I read this may help). I then put the momentus into the internal bay, in hope of booting osx from the original disk over usb, and migrating the data I needed over. Disk utility could not recognise there was even a disk in the internal bay (the momentus), just as before.I tried updating to lion (I was on snow leopard before) and turning it on again, but still disk utility couldn't even recognise the presence of the momentus xt when used in the internal bay.
I have noticed that I am having trouble updating the EFI firmware to version 2.7. Every time I try, it runs through the installation, restarts, says install was complete. But when I go to system update, it still lists this as an update, and system profiler still says I'm on the older version. Yes, I have tried updating it using the package from the apple website, it is no different.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 3 Replies
View Related
Apr 2, 2012
I have the Early 2011 Macbook Pro 13" with an Intel i5 Processor. Some of my friends told me that only the Intel i7 Processor Macbook Pros have the new Sandy Bridge processor. Are they correct because the base model is the only Macbook Pro in the line to have an i5 Processor.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 6 Replies
View Related
Apr 8, 2012
I currently have a 13 inch MBP early 2011 notebook that has a fan running constantly. The fans are not making horrendous noises indicating that the fan is broken or that a foreign object is bouncing around in my computer, but more so you can just hear the fans operating especially in a quiet room. The sound is very soft but in a dead silent room you can hear it working, you can even make out the sound even while typing. I am pretty sure my computer isn't broken, nor have I downloaded anything I am not supposed to that would allow my fans to make the noise. I bought this computer on the 26th of December and all I am using it for is simply MS word and logic pro 9. I uninstalled logic pro 9 a month ago due to my family buying an iMac and even then I can still hear the fan moving. I am curious as to what you all think, I may just bring it into the Apple store because it's quite frustrating having to write a paper and all you can hear is the sound of the fan working. My fans are running at 2000rpm and my research tells me that that number is normal.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 16, 2012
I have a MacBook Pro (15-inch, Early 2011). Will it be backwards compatible with USB 3.0 once OS X Mountain Lion is released?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.4)
View 7 Replies
View Related
Jul 4, 2012
After installing the update for Mac OS (10.7.4) my battery starts too drain too fast. As usual after 100% charge my laptop showing me time near 5 or 6 hours. Of course I understand that this number is relevant, but i always get this numbers when using not so heavy apps (Safari, Mail, Pages, Twitter and iTunes), but now i can see only 2 or 3 hours. After long searches i found the problem. My MacBook Pro 15 inch have problem with graphic-card changing, it always changes to AMD Radeon card when I start Twitter or Reader! I think that Twtitter is not so heavy app that must use diskrete grpahic-card. And because I always run Twitter in background my MacBook Pro's battery drains in a few hours.
[URL]
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Dec 1, 2014
diagnose this kernel panic. I recently installed a SSD and 16gb of RAM both from Crucial, and was wondering whether that is potentially the problem. This is on an early 2011 Macbook Pro.Â
Anonymous UUID:Â Â Â Â Â Â F50EBC9D-D65E-62EA-9F52-E10973A07940Â Â
Mon Dec 1 14:38:44 2014 Â
*** Panic Report ***
[Code]....
Info:
MacBook Pro (13-inch Early 2011), OS X Yosemite (10.10.1)
View 2 Replies
View Related
Dec 1, 2014
I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection. I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro, OS X Snow Leopard.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Jun 24, 2014
I switched out my HDD for an SSD and switched out my superdrive for the HDD. It was working fine for the past 6 months or so.Â
So, yesterday I plugged in my Macbook and started it up from hibernation. I then proceeded to launch chrome and as it tried to restore my last session (with like 5 or 6 YouTube tabs), it crashed. I tried closing it and re-opening it, but no cigar. I then thought to just open safari, but a no network detected warning came up. When trying to resolve that, an "unapproved caller" error came up.Â
I then tried to restore my computer from a TM backup, but was unable to due to it being unable to unmount the drive, then I tried just erasing the drive, nope.Â
I then decided to take the dang SSD out of the internal SATA connector and plugged it in through an external enclosure, that worked and I was able to restore my TM backup that way.Â
So bottom line, I can boot up from USB fine, but when I plug it into the internal SATA connector my MBP gets stuck at the apple logo. I've tried booting into safe mode, resetting the NVRAM and PVRAM. No luck. From what I've seen, it seems that I may have a bad SATA connector that needs to be replaced?Â
View 1 Replies
View Related
Feb 9, 2012
My trackpad suddenly stopped working well more precisely is being erratic. When I move my finger across the pad the pointer is not moving and when it does move there seems to be a lag. The gestures are not working properly etc and the pointer would move on its own not by much but a little bit. I have tried SMC and PRAM and that has not helped. I attached an external mouse and was having problems with moving the pointer, however when I selected disable trackpad when external mouse is attached the external mouse worked just fine. All of my software is up todate I am running OSX 10.6.8. I hope I do not have to get another track pad the laptop is about 7 months old and I have an apple care plan but I am out of the US for the next couple of months so I am looking for fix I can do myself.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 22, 2012
Had since May/June last year i5 13" and only since I applied all updates few weeks ago it seems to be louder than it was before?Â
It sounds like a fan but isn't... obviously. Right hand side of track pad, and covering it, in fact just touching it dampens it to barely audible. Is that normal or has something gone a bit weird? A constant fan noise, which isn't the fan is now there permanently.
Info:
MacBook Pro
View 11 Replies
View Related
Apr 9, 2012
I was trying to install a software and edit hosts' files in Terminal to finish the whole process. However I can't find the location of hosts even searching on the net. I tried to put /etc/hosts and /private/etc/hosts/, they were 'no such file or directory' and 'permission denied' !
Info:
Mac Pro, Mac OS X (10.7.3), early 2011
View 6 Replies
View Related
