MacBook Pro :: Trackpad Not Working Properly 13 Inch 2011 (early)
Feb 9, 2012
My trackpad suddenly stopped working well more precisely is being erratic. When I move my finger across the pad the pointer is not moving and when it does move there seems to be a lag. The gestures are not working properly etc and the pointer would move on its own not by much but a little bit. I have tried SMC and PRAM and that has not helped. I attached an external mouse and was having problems with moving the pointer, however when I selected disable trackpad when external mouse is attached the external mouse worked just fine. All of my software is up todate I am running OSX 10.6.8. I hope I do not have to get another track pad the laptop is about 7 months old and I have an apple care plan but I am out of the US for the next couple of months so I am looking for fix I can do myself.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
I currently have a 13 inch MBP early 2011 notebook that has a fan running constantly. The fans are not making horrendous noises indicating that the fan is broken or that a foreign object is bouncing around in my computer, but more so you can just hear the fans operating especially in a quiet room. The sound is very soft but in a dead silent room you can hear it working, you can even make out the sound even while typing. I am pretty sure my computer isn't broken, nor have I downloaded anything I am not supposed to that would allow my fans to make the noise. I bought this computer on the 26th of December and all I am using it for is simply MS word and logic pro 9. I uninstalled logic pro 9 a month ago due to my family buying an iMac and even then I can still hear the fan moving. I am curious as to what you all think, I may just bring it into the Apple store because it's quite frustrating having to write a paper and all you can hear is the sound of the fan working. My fans are running at 2000rpm and my research tells me that that number is normal.
I do a ton of video editing (Final Cut Pro) and music production (Logic Pro) as well as photography and the 350G hard drive is killing me. Can I install a larger capacity drive? If so, how do I install the new OS?
My MacBook Pro 15' Early 2011 model's SD Card slot stopped working after the 10.7.4 supplemental upgrade. I "zapped" (or reset) the PRAM and reset the SMC, and it worked for a minute but can't get it to work again. Its still under it 1 year manufacture warranty and was wondering if this would be, Apple Phone Support or an Apple Store Genius.
Well just installed XP on my boot camp partition. Here is my issue:1. The trackpad doesn't seem to be working properly. It's showing under device manager fine but the 2 finger right-click option isn't working. 2. Is the keyboard supposed to be backlit in XP?3. The sound buttons on the keyboard are not working (f11-f12)
Not sure if this a known issue or just me but I found this morning that two finger scrolling upwards doesn't work on my MBA when I am browsing in Google Chrome. I observed it works in other apps including Safari. Thought of taking it to the Genius Bar then gave up because of the hassle of going through the replacement as I already put in full body zagg on my MBA.
basically i havent had my macbook air that long (few month, maybe few more) but all of a sudden the click button on the trackpad has almost became slightly annoying, that when you press it slightly it clicks in as if youve clicked but nothing has happened, and then i press a slight bit more (normal pressure for a click) and it works normal. its just really annoying and it seems to be getting worse at one end, and ideally id like it to stop.
My Trackpad on my MacBook isn't working properly. I can move the arrow around the screen but I'm unable to open any applications. I plugged in a mouse and it works fine. The trackpad settings in system preferences seem fine, I didn't spill any liquid on it and didn't let it fall.
I have an early 2010 MBP (13 inch) whose RAM I upgraded to 8GB and the hard drive I upgraded to 750GB.Ever since I installed OSX Lion it takes ages to boot up (far slower than Snow Leopard which booted up almost instantly from turn on).Furthermore, when running, it gets very hot when running Windows virtualisation software inside OSX (VMWare Fusion 4/Parallels Desktop 6/7 - same results) and the fans turn on and become noticeabley loud.The machine is still under Applecare Warranty, is there anything I can do myself to resolve this, especially the heat/noisy fans?Is it due to having to work harder to virtualise Windows inside OSX and so run both systems concurrently, thus requiring more resources?
I bought an used macbook pro early 2011 (i5 2.3) and its not charging. With the battery in it the green light doesnt turn on (doesnt charge at all). If I open the macbook and remove the battery the green light turns on and I can turn on the macbook.I have already bought a new battery and its not charging.Could it be the magsafe board? I am asking because the light goes on without battery so I thought that the magsafe board maybe is working.
I have an early 2011 MBP with 4GB RAM installed and i want to upgrade to 8GB but before i do so i have some questions to make. The MBP has 2 RAM slots so my first question is whether the 4GB is 2x2GB or 1x4GB. Will I see any difference in my MBP performance if i do decide to upgrade?the model of the RAM which is compatible with my model.
OSX Lion 10.7.4 Time Machine recently started randomly failing, so I swapped out the external hard drive and failures continue. I'm wondering if its software or maybe the USB ports failing at this point.
Logs look like below (when it works):
5/22/2012 2:57:54.360 PM com.apple.backupd: Starting standard backup 5/22/2012 2:57:54.943 PM com.apple.backupd: Backing up to: /Volumes/MBBackup/Backups.backupdb 5/22/2012 2:57:58.000 PM kernel: disk2s1: device is not ready.
[code].....
Info: MacBook Pro (15-inch Early 2008), Mac OS X (10.7.3)
I've been experiencing problems with my 2011 MacBook Pro 15 model with it freezing on me all the time.I have read around and came to a conclusion that it is a logic board problem on the logic board that supports 3 GBs on the superdrive bay.Have any of you had this problem? What did you do to get the problem resolved? I'm going to my local Apple store to try to get this fixed (With the current logic board that supports 6 GBs on the superdrive bay) or get a replacement laptop.
my early 2011 macbook pro graphics *****. Battlefield 3 lags on low. Exporting videos is slow aswell. Is there anyway to make it work better? For a laptop that I paid 2000 dollars for it should work a lot better than it is.
I am looking to either increase ram or better still if I can afford it, put in a faster processor, my laptop is quite slow....and with more than two programs open, it can sometimes grind to a halt..
I'm looking to the size of the Hard disk drive in my 2009 17-inch pro. But can't find if the case will take a 1T HDD or not. As the 1T drive are around 12mm and not 9.5mm of the smaller one right now.
First off I want to say I've been looking for answers for this on google for a few days, and I've found similar problems but none of the fixes have seemed to help me. Then again I may be doing something wrong. I've recently purchased a 500GB Momentus XT to replace the stock hdd in my early 2011 mbp 13".Originally placed the disk in an external usb 2.0 enclosure and made a clone of my the stock disk. I could boot fine from the momentus xt when being run from the enclosure.
Problems arose as soon as I tried to swap the drives around. Now I could boot fine from the stock drive (in the enclosure) but the momentus XT could not be booted from. I tried swapping the momentus back to the enclosure, and it still worked fine this way. I attempted to reset PRAM and Smc, and it didn't help me.
So I tried to reformat the drive, and to make a partition of 495.11g with the rest being empty space (I read this may help). I then put the momentus into the internal bay, in hope of booting osx from the original disk over usb, and migrating the data I needed over. Disk utility could not recognise there was even a disk in the internal bay (the momentus), just as before.I tried updating to lion (I was on snow leopard before) and turning it on again, but still disk utility couldn't even recognise the presence of the momentus xt when used in the internal bay.
I have noticed that I am having trouble updating the EFI firmware to version 2.7. Every time I try, it runs through the installation, restarts, says install was complete. But when I go to system update, it still lists this as an update, and system profiler still says I'm on the older version. Yes, I have tried updating it using the package from the apple website, it is no different.
Info: MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
I have the Early 2011 Macbook Pro 13" with an Intel i5 Processor. Some of my friends told me that only the Intel i7 Processor Macbook Pros have the new Sandy Bridge processor. Are they correct because the base model is the only Macbook Pro in the line to have an i5 Processor.
MB Pro: 8,1 early 2011 - (13') 4G ram: the MB Pro errors when I attempt to install two 4G SO-DIMM modules (description below). I have actually attempted "two new" (OWC) Other World Computing sets of (2x4G), after it was believed one of the first modules arrived bad. The result remains; only one 4G modules works, in the lower slot. The upper/top slot does not accept a 4G module. I have tried two sets with all the possible combinations using an existing 2G and a new 4G. With this present setup all I get is 6G of ram. In addition, I used eraser on the ram, no go. I followed desktop procedure, unplugged battery etc., etc..
Info: MacBook Pro, Mac OS X (10.7.1), Triple boot: WIN7 & BT5
After installing the update for Mac OS (10.7.4) my battery starts too drain too fast. As usual after 100% charge my laptop showing me time near 5 or 6 hours. Of course I understand that this number is relevant, but i always get this numbers when using not so heavy apps (Safari, Mail, Pages, Twitter and iTunes), but now i can see only 2 or 3 hours. After long searches i found the problem. My MacBook Pro 15 inch have problem with graphic-card changing, it always changes to AMD Radeon card when I start Twitter or Reader! I think that Twtitter is not so heavy app that must use diskrete grpahic-card. And because I always run Twitter in background my MacBook Pro's battery drains in a few hours.
diagnose this kernel panic. I recently installed a SSD and 16gb of RAM both from Crucial, and was wondering whether that is potentially the problem. This is on an early 2011 Macbook Pro.
I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection. I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro, OS X Snow Leopard.
I switched out my HDD for an SSD and switched out my superdrive for the HDD. It was working fine for the past 6 months or so.
So, yesterday I plugged in my Macbook and started it up from hibernation. I then proceeded to launch chrome and as it tried to restore my last session (with like 5 or 6 YouTube tabs), it crashed. I tried closing it and re-opening it, but no cigar. I then thought to just open safari, but a no network detected warning came up. When trying to resolve that, an "unapproved caller" error came up.
I then tried to restore my computer from a TM backup, but was unable to due to it being unable to unmount the drive, then I tried just erasing the drive, nope.
I then decided to take the dang SSD out of the internal SATA connector and plugged it in through an external enclosure, that worked and I was able to restore my TM backup that way.
So bottom line, I can boot up from USB fine, but when I plug it into the internal SATA connector my MBP gets stuck at the apple logo. I've tried booting into safe mode, resetting the NVRAM and PVRAM. No luck. From what I've seen, it seems that I may have a bad SATA connector that needs to be replaced?
Had since May/June last year i5 13" and only since I applied all updates few weeks ago it seems to be louder than it was before?
It sounds like a fan but isn't... obviously. Right hand side of track pad, and covering it, in fact just touching it dampens it to barely audible. Is that normal or has something gone a bit weird? A constant fan noise, which isn't the fan is now there permanently.
I was trying to install a software and edit hosts' files in Terminal to finish the whole process. However I can't find the location of hosts even searching on the net. I tried to put /etc/hosts and /private/etc/hosts/, they were 'no such file or directory' and 'permission denied' !
I run parallels a fair bit for research and my MBP is pretty slow. Took it to genius and he said to get a memory upgrade to 8GB. However, I'm reading everywhere that it can handle 16GB and the Crucial says it is compatible (only £100 ish for this so seems a pretty good deal). All well and good- but will this invalidate Apple care as the max Apple state it can handle is 8GB? Or.....is 8GB going to be enough anyway?
I get this error nearly enough every time i turn on my MacBook Pro (Early 2011 Model), i says it needs to shut down because an error occured and when it comes back on i get this error below, which i copied and pasted.... Please can anyone help, as i dont understand what this means.(By the way, just so you know, i dropped my Macbook Pro a month ago).
[code]...
Info: MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
