As soon as I bought my Mac I created a partition for Windows on Boot Camp. I later realized that I didn't need it, but then it was too late, 30GB of my Hard Drive was already partitioned. Is there a way to revert the process and re-claim my 30GB to use with the Macintosh system?
View 4 Replies
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I had windows in a bootcamp partition for a while, and today, i decided to erase the partition and make a new, bigger one. I erased it just fine, but I can't make another one, it just gives me this error: Verification failed: this disk could not be partitioned. Use disk utility to repair this disk. I went to disk utility and i clicked verify disk (repair disk was not highlighted) and it gave me another error: filesystem verify or repair failed. I also repaired disk permissions with no such luck.
View 17 Replies View RelatedI'm getting a new imac in a weeks time, and was wondering about bootcamp. When I wanted to dual-boot a PC and Linux, I had to partition the hard-drive and install the OSes before doing anything else. Do I need to do that for bootcamp and Windows 7? I only really need windows on bootcamp for a game that's coming out in 2011. Do I need to install it now or can I wait?
View 3 Replies View RelatedI previously had a Windows partition that I created with Boot Camp. I was running out of room and wanting to try out Windows 7, so I deleted it and tried to create a larger one. So far, i have not been able to create a new partition. The error I'm currently getting reads "Verification failed. This disk could not be partitioned. Use Disk Utility to repair this disk." When I do that, I usually get that it needs repairing, I repair it, and then it happens again. I've done the repairing using the Leopard DVD or booting from another hard drive that's bootable. Another error I was getting said there is currently data there that cannot be moved. That errors told me to back up, wipe my hard drive, and do a reinstall. I really don't want to have to do that, and I really don't NEED Windows, but I did recently want to play some games and dug up my old games for Windows.
View 9 Replies View RelatedI'm both elated and pissy at the same time. Something happened to my mac when I was traveling, be it a latent hardware flaw, damage, or some other random act, and my mac OSX partition just, well, died. Unbootable, disk utility spends over a day trying to fix the boot record. The Bootcamp windows partition is fritzy, but it at least mounts and periodically can be booted from. I bought an external usb hard drive, loaded SL onto that, and have my mac back up and running again, but no data to speak of. So based on numerous recommendations, I paid good money to purchase Disk Warrior 4. Nothing, just told me the Macintosh HD partition on the hard drive was damaged, but that bootcamp could still be read.
View 3 Replies View RelatedI have a 13 inch Aluminum Late 2008 MacBook. Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). Currently I have a 160 GB SATA disk as my hard drive a d 4 GB of memory. (Is it time to upgrade or what?) I recently bought a Western Digital 1 TB internal hard drive to replace my exisiting internal hard drive. I spent a lot of time last night trying to first- connect this new hard drive to my computer so that I can then clone the existing hard drive and then hoping that I would get that done so I could install the new hard drive. No such luck.
My current hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BOOTCAMP
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BOOTCAMP
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. Question # 1: is that going to be a problem? I only run 1 program on Windows and that is the only reason I have BOOTCAMP on there at all. However, I do HAVE to have that program. Like I said it didn't give me the option to choose Windows so I didn't know where to go with this. Any help with that would be awesome.
Size: 26.34 GB (I just used the same size that was current, or close to it.) I connected the Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. The first one went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BOOTCAMP drives. However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BOOTCAMP drive. Question #2: Is it because of the Format type I chose when partitioning?
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
I had my hard drive partitioned into 2, where one was mac the other windows xp. I received this macbook as a gift from my sister so i wanted to reformat everything into mac. I popped in the Mac OS x install cd and just installed it. Now there is two hard drives and I am not able to re-partition it where i can bring it back to one again...I was suppose to delete windows first before re-formating my macbook.
View 9 Replies View RelatedI set up a boot camp Windows partition. Once in Windows, Partition Magic will not work in partitioning the boot camp drive. I tried from Disk Utility in OS X as well and that doesn't even let me partition the drive. Is it not possible to do? I am creating this to try to play a PC game and Fusion won't cut it. I would like to create normal partitions like I always do in Windows if possible.
View 2 Replies View RelatedI am using Leopard 10.5.8 with boot camp version 2.0. When I try partitioning my drive I get an error message saying it can't partition it. I read that it's from fragmented files, so I got iDefrag. I used the quick defrag (on-line) to defrag my laptop. When it was finished I started partitioning again, but I got the same error message! (No files were harmed when defragging) I also read that I should repair my disk/drive, but I don't have my installation disk (I might have misplaced it) so I can only repair disk permissions. When I try verifying my disk I get an error message and it stops. Should I find my installation disk, should I try reinstalling boot camp? Or should I just try repairing my disk. VMWare is slow with 3D, and Parallels isn't working for me.
View 1 Replies View RelatedI erased my bootcamp partition this morning thinking that was the same as deleting the partition - how do I actually delete the partition and combine it with my MAC OS partition now? I can't do it thru bootcamp
View 4 Replies View RelatedI recently swapped the 500Gb WD drive out of my Macbook Pro for a 500Gb Seagate Momentus XT drive. OSX transferred across without any trouble, but despite using WinClone to backup the Bootcamp partition (running Windows 7 64-bit) I haven't been able to restore it successfully. What happens is that it appears to restore, and I get the dual boot screen when I hold down the Alt key, but on selecting Windows I end up getting a screen saying that some component or other is missing. I might choose simply to use Windows 7 under Parallels on this machine if I am faced with a full restore, since that way I can more easily backup the Windows side, and since it's running (MUCH) better since swapping drives. However, IDEALLY I'd prefer to restore my existing partition...
View 2 Replies View RelatedCan I put the bootcamp xp pro partition on an external drive? i only have 8 or so gb left on my internal, but have about 80gb on my external would that work? or do they have to be on the same drive
View 24 Replies View RelatedI'm wanting to create a bootable clone of my windows bootcamp partition. The idea is to copy it to an external harddrive, then onto my new internal hard drive, and be able to boot it from there. I downloaded Carbon Copy Cloner, but it wont let me clone my windows drive, just my mac one. Is there any way I can do this (preferable for free).
View 2 Replies View RelatedI've tried to partition my drive so I can have some scratch disks etc on my mac. I create them in disk utility, then I create a BC partition -the drives disappear! I try creating the BC partition first then the other partitions - they disappear!!
View 4 Replies View RelatedI have a MBP and would like to use a bootable, OSX loaded external drive to install windows 7 via bootcamp. Is this possible? If so how?
View 4 Replies View RelatedI currently have XP installed on a Bootcamp partition on my main iMac hard drive. I've got a new external USB 2.0 SATA hard drive enclosure on the way that I plan to install a couple of spare SATA drives into. I was wondering about somehow moving my current Bootcamp partition off the main iMac drive and onto the spare WD Raptor drive that I've got without having to reinstall everything all over again. My second question would be - if I am able to switch the Bootcamp partition location, would the USB 2.0 transfer speed be fast enough for when I run windows? I typically use Windows for gaming only and very little else.
View 2 Replies View RelatedI purchased a new hard drive, my second Samsung 750 GB. My first one is partitioned, half for OSX half for Vista. Ultimately, I want to have a hard drive per operating system.
At first I thought the way to go for this, based on some stuff I read here on Mac Rumors was to use winclone to clone the windows partition,restore it to the new drive, and then I don't know what.I did the restore, there were errors in the log though..something about the wrong kind of partition. Basically it's become a pain in the ass, and I'm thinking there has to be an easier way.
It occurred to me, I might be able to use "Install and Archive" to move the boot volume to the new disk, moving the user files and network settings with it. If I did this would I be able to expand the windows partition using winclone utilizing the full hard drive? Or could moving the boot volume to the new disk mess up my Windows partition?
I currently have a small partition on my 27' imac allocated to Bootcamp which I now no longer require. I would like to remove this partition and restore the complete drive back to OSX without losing any vital info. Yes, I have done research on this however I remain a little confused. I would be grateful if someone would take the trouble to confirm that this is possible and, if they have the time, write a simple step by step procedure for me.
Info:
iMac, Mac OS X (10.7.3)
I'm going to buy an iMac with 1TB hard drive. I'm currently using a MacBook Pro with 320GB hard drive, and I haven't partitioned it yet. Is 1TB too big to be one partition? How do you guys partition your hard drive.
View 5 Replies View RelatedI'm trying to partition the internal hard drive on an Alu iMac so it also has a small FAT32 formatted portion, the only problem is, when I go to disk utility FAT32 is not an option under the drop down menu for formats. All it lets me do is Mac OS X Extended (Journaled) or something like that if I recall correctly.
View 6 Replies View RelatedI've got a USB hard drive. Every time I try to partition it with Disk Utility, I get an error message saying it "timed out". The hard drive used to be an OS X boot disk. The only partition it has at the moment is the blank 200MB EFI partition.
View 3 Replies View RelatedI've just bought a used iMac and for some reason it has 3 partitons but two have nothing on them. I've gone into Disk Utility and deleted those two but now the main Partition is still only showing as having 80GB of free space instead of the 200GB it should have. What can I do?
View 2 Replies View RelatedI realize this may be a stupid question but here goes... I have recently installed Windows XP with Boot Camp and now realize more than ever how much I hate XP and was wondering if it were possible to remove that partition all together from the hard drive, and I guess have it added back to my Mac OS side. I think i know the answer but just want to be sure.
View 7 Replies View RelatedIt seems as if many people on here use dedicated boot drive with faster read times for applications. I was wondering if partitioning my boot drive would be beneficial in anyway. My boot drive in Bay 1 is a 1TB, it stores everything except my iTunes library, then in Bay 2 I have another 1TB drive that I use CCC weekly to mirror the data from drive 1. If I was to partition the boot drive to use store my applications, and system software and moved all my data (documents, pictures, videos) to the partitioned part of the drive would there be any benefit?
View 11 Replies View Relatedhow to partition a hard drive, so I can boot a my Leopard image-file from a separate partition. who has enough patience & time to guide me through to complete this common task. I did the follow things so far to make a separate partition for my disk-image (Leopard Installer):
1. Launched Disk-Utility on Tiger 10.4.11 OS X.
2. Clicked on my hard-drive (149.1 GB).
3. Selected "Partition" in that menu (seen above the Volume Information).
4. Selected "2 Partitions" from the "Volume Scheme drop-down menu".
Recently I bought a Mac OS X Leopard, which comes with the Bootcamp. I have the XP operating disk, and Virtual Box, which is another program like Bootcamp. Instead of the bootcamp way of rebooting every time you switch between operating systems, Virtual Box allows both systems to run simultaneously. Instead of taking up space on my hard drive, I purchased a Seagate FreeAgent (Desk Edition) 1TB external drive.
I need to partition this drive in two, to allow the combined running of PC and Mac OS X using Virtual Box. The formats I will be using are FAT 32 and Mac OS Extended (Journaled). The latter is very easy, as I can simply do this on the Mac. However, the FAT 32... Since I am splitting the external hard drive in two, my XP PC cannot create a partition using FAT 32 which is greater than 32GB, and if I create the F32 partition using the Mac it won't be recognized by the PC operating system.
I am installing XP on my mac laptop and am not sure how much space to partition. The laptop's total space is about 235GB with currently 50GB free.
I will only be using Windows for a few specific programs: Autodesk: Toxik, Mudbox, Motionbuilder and Cleaner XL. I probably won't be using the programs too extensively either, I mainly use Maya and I have the OSX version of that.
Based on that info I was hoping to get a rough estimate on how much space I should partition for XP, I don't want to go too low and not be able to install and use everything but at the same time I don't want to put too much space on the XP partition either and end up with wasted space.
I have MBP 17", 2,53GHz, hdd is 250GB. I have a lot of music and pictures and quite lot movies. On the other side I have a lot mails. Is it better to make two partitions and keep them separate? What is your suggestion? If I decide to do that, do I need to remove everything from hard drive to make another partition? I never did it before on mac, but I remember that is necessary on windows.
View 5 Replies View RelatedWhen I try to make another partition on my harddrive (I've already made one housing windows XP), the bootcamp utility that my mac came with only gives me the option of removing the current partition. How do I make another one?
View 3 Replies View Related
