just read some threads about wobbing and creaking... Is that the same problem or is it two different kinds of problems?I'v just got my 1 replacement of my ultimate 13" it only creaks a little, but i cant decide if i should send it in for another replacement and maybe get one with screen issue etc. or can anyone confirm that a screwdriver actually solves the problem!?
View 11 Repliesmy 15inch umbp that i got in april is now creaking quite loudly when i lift up the lid to turn it on and again when i close it, is this normal or is it going to get worse
My MacBook Air has had a annoying creaking noise since shortly after it's purchase. I have had it for approximately two months and it continues to get worse. In goggling the internet I discovered I am not the only one suffering this problem. Has anyone had any success in redding their MBA of this problem permanently?
Info:
MacBook Air, Mac OS X (10.7.3)
I really wan't to know if there are anyone out there who can swear that their new MBA (13") doesn't creak AT ALL? I mean some ppl says that their MBA dosen't say anything at all! Is that really true? Or is it just because you (owners of non-creaking MBA) don't notice or is it because you don't think it is a problem?
I would also like to hear if any of you have made the creaking go away (for good) by tighten the buttomplate?
it's been just over a week now with my refurbished Rev B and I'm noticing the casing is creaky along the edges/seams. Everything is tight and it's not the display. Is this a Rev B thing? My Rev A was super solid and didn't make any noises. I know the internals of the Rev A vs. Rev B were drastically changed and I wonder if that has anything to do with it. It's not bad, I just noticed it and was curious... maybe it's a refurb thing?
View 5 Replies View RelatedMacbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
View 2 Replies View RelatedSpoke to someone in Apple CR.. They're convinced that a very creaky hinge is within specification? Surely if an issue isn't widespread, it's not acceptable and should be fixed...
View 24 Replies View Relatedmy 15inch umbp that i got in april is now creaking quite loudly when i lift up the lid to turn it on and again when i close it, is this normal or is it going to get worse
View 7 Replies View RelatedI bought a 13" Macbook Air yesterday. I had a 2009 MBP before and have been waiting on the refresh to get this. The machine is great. Quick, responsive, light, But one thing Ive noticed is that when handling the machine it makes creaking noises.Sounds like the body is flexing. I took it into the genius bar and the guy took it in the back, said he heard it and then said that it is normal even for the previous gen because of the thin body design.
View 24 Replies View RelatedI bought a 13" Macbook Air yesterday. I had a 2009 MBP before and have been waiting on the refresh to get this. The machine is great. Quick, responsive, light, But one thing Ive noticed is that when handling the machine it makes creaking noises. Sounds like the body is flexing. I took it into the genius bar and the guy took it in the back, said he heard it and then said that it is normal even for the previous gen because of the thin body design.
SOOO, my question is , does anyone elses 2010 MBA do this as well? I tried the display in the store but it is too loud in there to hear it.
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
View 8 Replies View RelatedFor some odd reason, I have been experiencing some creaking when I move the display of my Unibody 15.5" Macbook Pro. At all. It just is very annoying, as it has a distinct plastiky sound to it, and it was not there to begin with. I don't know if this matters, but I have a Speck clear case that I used, but then I took it off because it seemed to be twisting the display a bit. Is this creaking a known issue with the Unibodies, or is it just because of the Speck case? I have never dropped my computer, and it has never been mistreated. It just leads its life on my desk or in my laptop bag.
View 2 Replies View RelatedCan the owners of anti-glare models check their bezels to see if they are warping?ine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
On my 13" MacBook Pro, the hinge makes a cracking noise on the right side of the computer (near the power button) when the screen is positioned all the way back.
The entire hinge also makes a loud popping noise when I adjust the screen position. The screen seems very tight, and it takes a little bit of effort to move the screen, and when the screen is moved it makes the loud popping noise.
This is probably going to make some of you guys cringe, but sometimes putting pressure down on the top of the case close to where the black hinge meets to unibody enclosure seems to stop the popping noises. Putting downwards pressure on the hinge, or flipping the computer over and putting pressure on it that way, also seems to alter how much popping noise there is.
If I mess around a bit with applying pressure on different parts of the computer around the hinge, I can usually eliminate the noise. But, the cracking noise when I put the screen all the way back is still there.
It's not interfering with the operation of the computer, it's just incredibly annoying and this is only a four month old machine which shouldn't be creaking and cracking already.
Mine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".
I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
Anyone else notice this? I am pretty sure it is caused by the heat in that area. That is a really poor design.
For some odd reason, I have been experiencing some creaking when I move the display of my Unibody 15.5" Macbook Pro. At all. It just is very annoying, as it has a distinct plastiky sound to it, and it was not there to begin with. I don't know if this matters, but I have a Speck clear case that I used, but then I took it off because it seemed to be twisting the display a bit. Is this creaking a known issue with the Unibodies, or is it just because of the Speck case? I have never dropped my computer, and it has never been mistreated. It just leads its life on my desk or in my laptop bag. Any ideas?
View 5 Replies View RelatedBuild-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
So last December my laptop got smashed and everything works except for the backlit screen. In fact I can still use this laptop it is just extremely hard since the screen does not light up. The person that smashed it ended up buying me a new laptop so I have this beat up (and I mean the shell is destroyed) laptop with quite a lot of functioning parts.
Now a few weeks ago my girlfriends Grandad spilled a beer on his brand new 2010 Macbook. The logic board is shot so it is almost cheaper for him to buy a brand new laptop.
Would it be possible for me to take the logic board out of my 2008 Black Macbook and put it into his 2010 White Macbook?
By far the most interesting benchmark trend coming out of the latest Macbook Air tests is that of the 320M GPU - is this thing somehow clocked differently than in the Macbook/Macbook Pro?
From:
[URL]
The latest Macbook Pro 13" 2.4 Ghz gets 33 FPS in Call of Duty 4, whereas the Macbook Air 13" (using the same 320M GPU) gets 40 FPS. Even the 1.4Ghz 11" gets 37! So obviously we're not talking about a CPU limited game - the only explanation then is that the GPU in the Macbook Air is clocked differently than in the 13" Macbook Pro, no?
From:
[URL]
Again the Macbook Air clocked at 2.13 ghz is beating the 2.4 Ghz Macbook Pro in World of Warcraft and Portal! And in WOW the 11" 1.4ghz still manages to beat the 2.4 Ghz 13" Macbook Pro.
Anyone have any additional insight into this? Anand did a terrible job of testing these for gaming performance, unfortunately, so he may not have even noticed this trend.
Is the white one the same size as the 13" aluminum that now went pro?Pretty much, I want to know if I buy a case for the original 13" Metal uMB from InCase, will it fit on this plastic one? They don't have blue for this, but they have blue for the original aluminum one.
View 3 Replies View RelatedI have a 2008 13" white, plastic MacBook. Its a bit slow, but adequate. Thinking of selling it and paying the difference to get the 11" MacBook Air. I've heard it is similar in speed and has the same processor.
The main problem I have with my current MacBook is that its heavy - I need something lightweight to easily carry to school and class for note-taking and such.
How is the Air better or worse, and would I be losing anything significantly by replacing the 08 plastic MB with a MBA?
macbook '08 specs: [URL]
I just upgraded my daughter from last year's MacBook to a new 2009 MacBook Pro (my mother will get her old one) by cloning the drive using SuperDuper. Everything works fine except it doesn't detect the audio hardware in the OS. I see that the new macbook pro has different audio hardware according to system profiler. Is there a way to copy the driver off the install DVD or should I just go ahead and reinstall everything.
View 2 Replies View RelatedHave searched on Mroogle but couldnt find what i was looking for.
I have my Blackbook connected to my tv via mini dvi to dvi then to hdmi, but i also have another laptop which is the old style Macbook Pro.
I was looking for a piece of software that would let me use the other laptop which isnt connected to the tv as a wireless keyboard and mouse?
Anyone ever tried this before? Any ideas?
My MacBook Pro was stoen this weekend and I need to know if the Find My Mac service can help locate it. Its a summer 2009 model 15" Macbook Pro. I have the computer's serial number, and the computer is registered to my Apple ID.
Info:
MacBook Pro (15-inch 2.53 GHz)
I just bought a macbook as a replace for my five year old iBook. I was planning on purchasing a second power adapter. I like the size and more rugged connector on the Macbook Air power adapter.
I have searched around and it sounds like the Air adapter will work with a MacBook but I am not completely convinced. I understand that this adapter will only charge or power the unit but not both.
Has anyone tried their Air adapter on a MacBook? Could an Air owner tell me the voltage and current rating (outputs) on their adapter?
I currently play warcraft on my older macbook pro. I am attracted by the latest macbook/macbook pros. But will the latest macbook still play warcraft well, or do I stay with the latest macbook pro?
View 2 Replies View RelatedI wanted to know if I can replace the upper case of a Core Duo white macbook with that of a Core 2 Duo black macbook? The white one has the distinctive yellowing of the rev A macbooks, so i'd like to make it better whilst making a black/white frankenMac.
If not, can I at least replace the airport card?
I'm putting a computer in my kitchen that anybody in the house can use (kids & parents). It will be hooked up to a 24" LCD and also act as a small file server, dvd player and perhaps eyetv dvr.
I like the mini because it is small (can hide in the cabinet where spills won't get it), is cheap and uses only 13W when idle. But when I think down the road, 4 year old laptops seem a lot more useful than 4 year old mac minis. So I'm a bit torn.
So my questions are:
- Does anybody know how much power the macbook uses when "idle" (just running finder).
- Can the macbook be run with the lid closed? (I know old powerbooks used to vent hot air through the keyboard.)
(Then again, I have the computer in the kitchen so I can watch my kids on the computer. In 4 years they'll be 5 years old and probably want a laptop they could have in their own room - exactly what I want to avoid. And I'll probably upgrade my macbook pro by then anyway.)
I have a late 2009, white unibody MacBook which is 7 months old, and I have been noticing that the battery life is getting less and less, and am rather confused.I reset the SMC as per Apple instructions, and then followed the battery calibrating guide to the letter from apple.com, and tonight it seems to have lasted... 3.5 hrs! Hardly the quoted 7 hours that Apple spec, and I am simply doing light web browsing, nothing else.Am I doing something wrong? The machine sits connected to magsafe 90% of the time, but I cannot envisage that would cause any problem, as it knows when it is charged, so afaik no more current can get to the battery to damage it
View 15 Replies View Related