My MacBook Air has had a annoying creaking noise since shortly after it's purchase. I have had it for approximately two months and it continues to get worse. In goggling the internet I discovered I am not the only one suffering this problem. Has anyone had any success in redding their MBA of this problem permanently?
Info:
MacBook Air, Mac OS X (10.7.3)
my 15inch umbp that i got in april is now creaking quite loudly when i lift up the lid to turn it on and again when i close it, is this normal or is it going to get worse
I was wanting to know how hard it is to change top and bottom case and keyboard area? I would like to know that if anything was to happen to my soon to have macbook I could change it. Also this on the older macbooks. And if I have Apple to change it how much would it cost? And yes I know that they should replace keyboard case area for free because of the defunct cracking issue.
View 3 Replies View RelatedWhere i can replace the aluminum case, is it possible?, i search for spares and didn't find any.
View 2 Replies View Relatedjust read some threads about wobbing and creaking... Is that the same problem or is it two different kinds of problems?I'v just got my 1 replacement of my ultimate 13" it only creaks a little, but i cant decide if i should send it in for another replacement and maybe get one with screen issue etc. or can anyone confirm that a screwdriver actually solves the problem!?
View 11 Replies View RelatedI really wan't to know if there are anyone out there who can swear that their new MBA (13") doesn't creak AT ALL? I mean some ppl says that their MBA dosen't say anything at all! Is that really true? Or is it just because you (owners of non-creaking MBA) don't notice or is it because you don't think it is a problem?
I would also like to hear if any of you have made the creaking go away (for good) by tighten the buttomplate?
it's been just over a week now with my refurbished Rev B and I'm noticing the casing is creaky along the edges/seams. Everything is tight and it's not the display. Is this a Rev B thing? My Rev A was super solid and didn't make any noises. I know the internals of the Rev A vs. Rev B were drastically changed and I wonder if that has anything to do with it. It's not bad, I just noticed it and was curious... maybe it's a refurb thing?
View 5 Replies View RelatedMacbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
View 2 Replies View RelatedSpoke to someone in Apple CR.. They're convinced that a very creaky hinge is within specification? Surely if an issue isn't widespread, it's not acceptable and should be fixed...
View 24 Replies View RelatedSomething reasonably priced, so i can take it safely out in the car with me! Also will be looking for a car charger for it!Decided against getting an iPad coz of the limitations so im gonna get a dongle, looked around & I like the look of TMobile deal of ?40 for 90 days.
View 1 Replies View Relatedmy 15inch umbp that i got in april is now creaking quite loudly when i lift up the lid to turn it on and again when i close it, is this normal or is it going to get worse
View 7 Replies View RelatedI bought a 13" Macbook Air yesterday. I had a 2009 MBP before and have been waiting on the refresh to get this. The machine is great. Quick, responsive, light, But one thing Ive noticed is that when handling the machine it makes creaking noises.Sounds like the body is flexing. I took it into the genius bar and the guy took it in the back, said he heard it and then said that it is normal even for the previous gen because of the thin body design.
View 24 Replies View RelatedI bought a 13" Macbook Air yesterday. I had a 2009 MBP before and have been waiting on the refresh to get this. The machine is great. Quick, responsive, light, But one thing Ive noticed is that when handling the machine it makes creaking noises. Sounds like the body is flexing. I took it into the genius bar and the guy took it in the back, said he heard it and then said that it is normal even for the previous gen because of the thin body design.
SOOO, my question is , does anyone elses 2010 MBA do this as well? I tried the display in the store but it is too loud in there to hear it.
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
View 8 Replies View RelatedFor some odd reason, I have been experiencing some creaking when I move the display of my Unibody 15.5" Macbook Pro. At all. It just is very annoying, as it has a distinct plastiky sound to it, and it was not there to begin with. I don't know if this matters, but I have a Speck clear case that I used, but then I took it off because it seemed to be twisting the display a bit. Is this creaking a known issue with the Unibodies, or is it just because of the Speck case? I have never dropped my computer, and it has never been mistreated. It just leads its life on my desk or in my laptop bag.
View 2 Replies View RelatedCan the owners of anti-glare models check their bezels to see if they are warping?ine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
I have about 50 *.mp3's on my hard drive that have the file names in all upper case. When looking at them in itunes it drives me nuts....Is there a way to convert the uppercase file name to lowercase? I have googled but can't find anything. I do not want to do it manually, that would take a long time =( thanks, I'm crossing my fingers
View 11 Replies View RelatedOn my 13" MacBook Pro, the hinge makes a cracking noise on the right side of the computer (near the power button) when the screen is positioned all the way back.
The entire hinge also makes a loud popping noise when I adjust the screen position. The screen seems very tight, and it takes a little bit of effort to move the screen, and when the screen is moved it makes the loud popping noise.
This is probably going to make some of you guys cringe, but sometimes putting pressure down on the top of the case close to where the black hinge meets to unibody enclosure seems to stop the popping noises. Putting downwards pressure on the hinge, or flipping the computer over and putting pressure on it that way, also seems to alter how much popping noise there is.
If I mess around a bit with applying pressure on different parts of the computer around the hinge, I can usually eliminate the noise. But, the cracking noise when I put the screen all the way back is still there.
It's not interfering with the operation of the computer, it's just incredibly annoying and this is only a four month old machine which shouldn't be creaking and cracking already.
Does anyone know if the PB 15.4 Aluminum case is exchangeable with the Macbook Pro 15.4 case? I have a 1.6Ghz Powerbook which has a few dents in the front but I don't see any of these cases for sale on Ebay, but I do see Macbook Pro cases. It's really a nasty cosmetic issue I'd like to resolve and then sell it.
View 1 Replies View RelatedI am working on restoring a Time Machine backup from Leopard to a clean installation of Snow Leopard. The only problem I'm facing is that the Leopard backup is on a case-sensitive drive (and the Snow Leopard drive is set up, by default, as case-ignorant).
I have scoured the Web the last two days and have not found a definitive answer to my question: Is there a way to transfer the data from the Time Machine backup on the case-sensitive drive to the case-ignorant Snow Leopard drive?
Yesterday I ran across a tutorial explaining how this might be accomplished using SuperDuper! but a commenter explained that Disk Utility could be used and was much easier.
I tried the Disk Utility method but it didn't work, and I ran out of time to give the SuperDuper! option a try. Does anyone know if it, or even Carbon Copy Cloner, might solve my problem?
Mine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".
I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
Anyone else notice this? I am pretty sure it is caused by the heat in that area. That is a really poor design.
I saw a link a while back of a guy who converted an old G5 case into a server, any idea how to do this?
Or does someone know of the link to see his server, or one like it?
For some odd reason, I have been experiencing some creaking when I move the display of my Unibody 15.5" Macbook Pro. At all. It just is very annoying, as it has a distinct plastiky sound to it, and it was not there to begin with. I don't know if this matters, but I have a Speck clear case that I used, but then I took it off because it seemed to be twisting the display a bit. Is this creaking a known issue with the Unibodies, or is it just because of the Speck case? I have never dropped my computer, and it has never been mistreated. It just leads its life on my desk or in my laptop bag. Any ideas?
View 5 Replies View RelatedBuild-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
Soon i will be getting a Mac(i think) and was wondering about a case. Since i want a Macbook Pro with the Unibody Housing i want it to be safe. Now i can't decide if i want a case or a Sleeve. Now the Case might have heat issues even with the vents that are on the case. The sleeve won't have that issue but will it be more prone to scratching the Macbook it self? Or should i go no case and just sorta deal with the scratches. There is a Price difference between the Sleeve and the Case. About $20 Cdn more for the Case.
Sleeve[URL]
Case[URL]
Is it possible to get a MBP with transparent case? It would be cool to see the parts.
View 1 Replies View RelatedSee title.What are you using for a case/sleeve?
View 1 Replies View RelatedI was wondering which macbook air case or sleeve would be the best to get and cost 40 dollars or less. Post pictures if you can
View 9 Replies View RelatedI have a second 1.8 hdd disk and would like to use it as an external device.. does anybody know where and what i have to buy?
View 3 Replies View Related