Spoke to someone in Apple CR.. They're convinced that a very creaky hinge is within specification? Surely if an issue isn't widespread, it's not acceptable and should be fixed...
View 24 RepliesBuild-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
Quite a few seem to have this 'issue' and I thought maybe somebody has figured out a solution?Such a shame on an otherwise perfect machine. I would have preferred the same kind of rubbery plastic that was on the old generation MBP
Macbook Pro is fairly new, and the hinge on both side is already making squeaking noise when I open my screen. It gets a bit annoying, I open it from the center top of the screen, not by the side. Is this a problem that I should be taking to the Apple Store? Or this can be fixed easily?
View 2 Replies View RelatedI got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Build-quality wise the unibodies are really as perfect as I've ever experienced any machine to be. Simply amazing. BUT, the black plastic hinge cover is cheap and creaks as soon as I grab the computer or open the display. I opened her up to see if there was anything I could do to reinforce it or something, but I didn't want to mess with it.
View 8 Replies View RelatedCan the owners of anti-glare models check their bezels to see if they are warping?ine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
On my 13" MacBook Pro, the hinge makes a cracking noise on the right side of the computer (near the power button) when the screen is positioned all the way back.
The entire hinge also makes a loud popping noise when I adjust the screen position. The screen seems very tight, and it takes a little bit of effort to move the screen, and when the screen is moved it makes the loud popping noise.
This is probably going to make some of you guys cringe, but sometimes putting pressure down on the top of the case close to where the black hinge meets to unibody enclosure seems to stop the popping noises. Putting downwards pressure on the hinge, or flipping the computer over and putting pressure on it that way, also seems to alter how much popping noise there is.
If I mess around a bit with applying pressure on different parts of the computer around the hinge, I can usually eliminate the noise. But, the cracking noise when I put the screen all the way back is still there.
It's not interfering with the operation of the computer, it's just incredibly annoying and this is only a four month old machine which shouldn't be creaking and cracking already.
Mine is bulging out at the bottom of the screen, right by that area that gets burning hot when you are plugged in or are on the 9600m gt--right where is says "Macbook Pro".
I noticed that the hinge started to develop a creaking sound when I opened and closed the lid. So I investigated to see if there were any cracks in the hinge. What I found was that if you look at the space between the bezel and the screen, there is a slight (very slight) bulge right by the wording "Macbook pro". If you press down on it, it moves--unlike the rest of the bezel.
Anyone else notice this? I am pretty sure it is caused by the heat in that area. That is a really poor design.
my 15inch umbp that i got in april is now creaking quite loudly when i lift up the lid to turn it on and again when i close it, is this normal or is it going to get worse
I got my Unibody MacBook the first day they were available, and since late December, the hinge has gotten stiffer and stiffer, making a cracking noise when I move it after it stays in one position for a few seconds.
I took it to the Genius Bar (covered under AppleCare) but the people there wouldn't do anything about it, saying it's within normal spec and classifying it as a "user perception issue." (The slightly condescending sound of that phrase is for another post.)
Has anyone attempted to lubricate the hinge in their laptop themselves? I removed all of the bottom paneling and looked at the hinge, but didn't see how to separate it from the case easily. Would it be a bad idea to try to squirt a little silicone lubricant into the hinge to see if that helps the issue? Is there another trick I could try.My mom has a Unibody Pro with a hinge that glides nice and smoothly and it's annoying mine is no longer working properly like this.
Here's what I gathered so far on the new Airs.
Good:
More RAM - up to 4GB. At last.
Flash storage across the range - faster to resume from sleep, faster in general
11.6" also available - at least there is a choice of sizes
Beefier graphics chips - will now drive the 27" Cinema Display natively
Stereo speakers
Glass Trackpad - though you may not prefer it
Higher resolution displays
+1 USB port
Improved battery life (TBC)
Reduced thickness and weight
Not So Good:
No more backlit keyboard
No more bundled USB>Ethernet adapter
Still got display port/audio out/magsafe on different sides of the chassis
Unknown:
Have they fixed the hinge problem?
Have they improved the cooling design?
Are the edges still quite sharp on your wrists?
Is the display fully glossy or like the old ones?
The only compelling feature for me over my revC is the 4Gb RAM. Not worth the cost of upgrading.
I have Macbook pro late 2011 model. I want to know the screwdriver specifications to open the lid for ram upgrade. Model Name:MacBook Pro Model Identifier:MacBookPro8,1
Info:
MacBook
Pro
I am considering buying a iBook to save some money, but first I need to know...
1)What is the max ram possible in an iBook G4
2)What is the biggest HD that can fit in an iBook G4
just read some threads about wobbing and creaking... Is that the same problem or is it two different kinds of problems?I'v just got my 1 replacement of my ultimate 13" it only creaks a little, but i cant decide if i should send it in for another replacement and maybe get one with screen issue etc. or can anyone confirm that a screwdriver actually solves the problem!?
View 11 Replies View RelatedMy MacBook Air has had a annoying creaking noise since shortly after it's purchase. I have had it for approximately two months and it continues to get worse. In goggling the internet I discovered I am not the only one suffering this problem. Has anyone had any success in redding their MBA of this problem permanently?
Info:
MacBook Air, Mac OS X (10.7.3)
I really wan't to know if there are anyone out there who can swear that their new MBA (13") doesn't creak AT ALL? I mean some ppl says that their MBA dosen't say anything at all! Is that really true? Or is it just because you (owners of non-creaking MBA) don't notice or is it because you don't think it is a problem?
I would also like to hear if any of you have made the creaking go away (for good) by tighten the buttomplate?
it's been just over a week now with my refurbished Rev B and I'm noticing the casing is creaky along the edges/seams. Everything is tight and it's not the display. Is this a Rev B thing? My Rev A was super solid and didn't make any noises. I know the internals of the Rev A vs. Rev B were drastically changed and I wonder if that has anything to do with it. It's not bad, I just noticed it and was curious... maybe it's a refurb thing?
View 5 Replies View RelatedI am trying to get my girlfriend's parents a cable that will hook their 2005 Mac Mini to their HDTV. I don't know the specs on the mini, so I'm wondering what cable I will need. I know it needs to be something -> HDMI. Is the video out port on the mini a DVI?
View 3 Replies View Relatedmy 15inch umbp that i got in april is now creaking quite loudly when i lift up the lid to turn it on and again when i close it, is this normal or is it going to get worse
View 7 Replies View RelatedI bought a 13" Macbook Air yesterday. I had a 2009 MBP before and have been waiting on the refresh to get this. The machine is great. Quick, responsive, light, But one thing Ive noticed is that when handling the machine it makes creaking noises.Sounds like the body is flexing. I took it into the genius bar and the guy took it in the back, said he heard it and then said that it is normal even for the previous gen because of the thin body design.
View 24 Replies View RelatedI bought a 13" Macbook Air yesterday. I had a 2009 MBP before and have been waiting on the refresh to get this. The machine is great. Quick, responsive, light, But one thing Ive noticed is that when handling the machine it makes creaking noises. Sounds like the body is flexing. I took it into the genius bar and the guy took it in the back, said he heard it and then said that it is normal even for the previous gen because of the thin body design.
SOOO, my question is , does anyone elses 2010 MBA do this as well? I tried the display in the store but it is too loud in there to hear it.
For some odd reason, I have been experiencing some creaking when I move the display of my Unibody 15.5" Macbook Pro. At all. It just is very annoying, as it has a distinct plastiky sound to it, and it was not there to begin with. I don't know if this matters, but I have a Speck clear case that I used, but then I took it off because it seemed to be twisting the display a bit. Is this creaking a known issue with the Unibodies, or is it just because of the Speck case? I have never dropped my computer, and it has never been mistreated. It just leads its life on my desk or in my laptop bag.
View 2 Replies View RelatedFor some odd reason, I have been experiencing some creaking when I move the display of my Unibody 15.5" Macbook Pro. At all. It just is very annoying, as it has a distinct plastiky sound to it, and it was not there to begin with. I don't know if this matters, but I have a Speck clear case that I used, but then I took it off because it seemed to be twisting the display a bit. Is this creaking a known issue with the Unibodies, or is it just because of the Speck case? I have never dropped my computer, and it has never been mistreated. It just leads its life on my desk or in my laptop bag. Any ideas?
View 5 Replies View RelatedAfter playing with my friend's MacBook, and having a long hard think, I'm definitely of the opinion that the hinge on my MacBook is far too loose. It can still support itself, but I get major wobble upon opening, it even wobbles when I type (not ferociously).
I don't get any sort of resiliance when I try to open or close it, I literally have to be careful as so not to slam it, it's like I'm closing thin air.
It just doesn't feel sturdy enough for a notebook which needs everyday carting around and use.
Also when the MB is closed the top lid (with the screen) slides a bit this way and that over the base. Only a few millimeters, but enough to notice.
The problem is, I'm most likely only going to get one opportunity to get to see an genius.
The MB is covered by AppleCare and so forth, but will the genius open the thing up right there and then and give whatever needs tightening a good tighten?
Have any of you experienced this issue before and was it solved, and if so how? (Time, in-store or send off job, etc etc).
I just unboxed this beauty. This is my first mac ever and I love it so far. However one thing I noticed straight out of the box was how loose the hinges are. The screen tilts if I move the macbook air to a 90 degree angle. I've own quite a few laptops but this is the first one with a loose hinge straight out of the box. Is this normal or should I be meeting with a nerd?
View 24 Replies View RelatedOn another post...I indicated that I bought a MacBook Pro 13 inch laptop loaded up with all the goodies and decided to cancel my order due in part to possibly saving by installing my own SSD and RAM. I did not really mention the main reason that I cancelled my order....
I did not mention that I went to a local Best Buy and checked out the 13 inch MacBook Pro on display. I was kind of shocked to note the amount of wiggle that was present on the display screen of the 13 inch. I read another thread about the screen becoming loose and wobbly on the 13 inch MBP after time.
Does this occur on the 15 and 17 inch models as well?
I have a 3-4 year old 15 inch MBP and the screen is still solid as a rock. I hate to spend dollars on a lesser quality product so I thought I would ask if this screen weakness comes with all of the newer MacBook Pro models.
(I did not check out the 15 or 17 inch models at Best Buy...but I intend to go back and see if they are weak also). I want to buy a 15 inch MBP...so I hope that they are solid as a rock as my older MBP.
It appears that the MacBook Air may have a hinge problem.
Mine sure does, exactly as described, see [URL].
Not sure if a lawsuit will fix mine, but if it gets noticed maybe Apple will respond. Anyone else having this problem?
So I just got my MacBook Air (rev A) back from AppleCare after my hinge (like many others', apparently) decided to randomly bust itself. I was very pleased that when I took my MBA to the Apple Store, they didn't bat an eye about replacing the hinge (I'd heard horror stories about Apple denying the part was defective and calling the damage a user error, even with computers covered under warranty). But I was shocked when my package arrived today and the letter inside detailed the parts replaced. Keep in mind, the only thing wrong with my computer (as far as I could tell) was a broken hinge. Here's what they replaced:
Antenna window
Video Display Panel
Camera
Bottom Case
Display Housing
Clutch
Clutch (two different part numbers)
Bezel
Top Case
Logic Board
I want to take it to an Apple Store but doubt they will help me since my AppleCare ran out.
View 5 Replies View RelatedIt seems like the hinge has stiffened up since owning it. Sometimes makes a pop noise when moving it from a non-moving position. I would imagine it's the plastic bezel that's kinda loose and snappy if you touch it at the bottom of the hinge but I dunno. Any one else? I can deal I just hope it doesn't cause damage.
I need this machine to be fully working when I go abroad in the Fall.
