MacBook Air :: Installed Fusion 3 And 32bit Win 7, Allocated 32GB To It / When Check 21GB Free?
Nov 10, 2010
I installed Fusion 3 and 32bit Win 7. I allocated 32GB to it. Now when I check inside I see 21GB free (I have installed MS office 2010 and Smartdraw). I have access to VM ware setting where I can reduce the size of the Fusion 3 from 32 GB to a lesser number and I was thinking maybe 22GB, thus reclaiming 10GB for Mac.Do you think making such a change on the fly will make something go wrong on the Mac side or inside the VM.....BTW, I have the fully loaded MBA 11.6".
View 5 Replies
ADVERTISEMENT
Oct 1, 2009
I've had my iMac for just under a week now, and I wanted to play some games, so I did a Time Machine backup, and ran BootCamp. Vista install disk wouldnt work, so I used my copy of the Windows 7 RC1 32bit. That worked fine, its installed and working just fine, but when I went to check what it would show under "System" in the control panel, it shows my memory as 4.00GB and says 2.73GB useable. Is this normal? I know that 32 bit cuts off memory at around 3.23GB, and I was under the impression with Windows 7 and Vista SP1 the limitation was supposed to be moved to 4GB. Is this something I should be worried about? Also, I get some really bad lag spikes on Windows.
View 15 Replies
View Related
Jan 14, 2009
I installed Windows 7 beta in VMWare Fusion on my new aluminum macbook. It's pretty cool how seamlessly it works within the OS and spaces.
But what do you guys use your virtual machines for? How often do you have it open? What OS do you use?
View 17 Replies
View Related
Jul 14, 2009
I installed W7RC and VMware fusion did everything for me. I remember when I installed XP I had to put in my OSX disc to install drivers to make certain things work...? Do I need to put my OSX disc in with the RC and Fusion 2.0.5?
Everything seems fine but I'm not familiar enough with windows to actually know.
View 5 Replies
View Related
Feb 15, 2010
I installed Windows 7 through VMWare Fusion's easy setup. Can I use this existing Windows installation to make a BootCamp partition? I know Windows can be used vice versa (BootCamp first, then VMWare), but I already installed Windows 7 with VMware first.
View 7 Replies
View Related
Jun 26, 2009
I used Bootcamp on my new MacBook Pro 15" to install Windows XP Pro. After some troubles everything worked fine. Then I got VMware Fusion (latest version) installed and attached the Windows XP Pro. It did some magic, booted and all was fine. But then the problems started. I could not select any start up disk in the Preferences of Mac OS X, except for Network boot. With the Option key I can select between Mac OS X and Windows XP just fine.
I can boot Mac OS X from the Bootcamp Panel in Windows XP. I tried several things like removing VMware files for the Windows XP thing, removing partitions, but I still couldn't select anything other then the Network boot from the Startup disk in Preferences. In the end I took the install DVD of Mac OS X, used the Disk utility and started all over. I would like to use VMware Fusion to boot the Windows XP partition to do some stuff I can't do in Mac OS X (work related).
View 1 Replies
View Related
Sep 3, 2010
I just uninstalled VMware Fusion from my MBP. However, I don't seem to see that the 40GB I dedicated to the Windows 7 I installed is freed. Please, how do I do that? I need the 40GB to make my already slow 160GB 13'' MBP faster!
View 2 Replies
View Related
Apr 20, 2012
How to check if java is installed on my mac
Info:
MacBook Pro
View 1 Replies
View Related
Apr 15, 2012
I want to be able to check the downloads that I put on iPad if they were free or paid for when I first downloaded them. It is another way of checking if my 8-year-old son had downloaded apps that were not free!
View 3 Replies
View Related
Dec 9, 2014
On my previous OS version I simply clicked the activity monitor to see how much disc space was used and how much was available? I can't find that function now.
My specs:
OS X Yosemite
Version 10.10
MacBook Pro (Retina, medio 2012)
2,7 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
Info:
MacBook Pro with Retina display
View 2 Replies
View Related
Aug 30, 2009
I installed Snow Leopard, it did it's thing (took about 30 min) then restarted. My question is how do I know if it took? I can't see anything different at all, which may be the case, but is there a place to look and see if my OS is now Snow Leopard?
View 7 Replies
View Related
Oct 22, 2009
Before opening this web browser, out of 8GB of RAM installed, 460mb were free, 2gb were inactive and over 4 gb were active.if only my activity monitor is running, why don't i have something like 6gb+ of free ram?
View 4 Replies
View Related
Jun 8, 2010
As the Title of The Post says, i need to know if Apple Hardware check, Does check the hard drive. I'm getting a little bit more frequent hard drive clicks so i want to make sure my HD is not failing. So i need to know as so as possible if Apple hardware check looks for Hard drive Problems. And if it does not. Can someone point me into some Utilities i can use?
View 7 Replies
View Related
Jul 27, 2009
I currently am on an early 08 Macbook Pro 17". 2.4ghz with 4gb of RAM.
I've recently purchased a 32gb SDHC card. Trying to create a bootable emergency drive with os installed on it.
I plugged it into my Mac via usb adapter and it mounted fine. Was formatted as Fat-32. So went to disk utility and reformatted as 1 partition, GUID, Mac Os Extended (journaled), to make it a bootable disk for the os. When doing this it appeared to complete fine, but disappeared from my desktop. No longer showing up in finder. Still mounts in disk utility though. Tried different ports, rebooting, and reformatting,, with no resolve. Reformatted it back to Master Boot Record/ Ms Dos, and it mounts again fine in Finder. Can drag data to it with no issue.
Reformatted again as GUID and again it disappeared from Finder and desktop. This is where I'm confused...In Disk Util it completes the formatting and shows Map Scheme as GUID and journaled. The odd thing is that on the left where disks are mounted it shows the indented partition as disk3s2. Even though I've renamed it when formatting. It will maintain the name formatting back to Fat32, but not with GUID. Also if I try to repair disk it fails. " Disk Utility stopped repairing �disk3s2� because the following error was encountered:
Filesystem verify or repair failed."Does not fail doing repair as Fat32.
Figured I would just try to install Os anyways and booted to install disk. When booted to Os it did list the SD card as an optional drive, but had the exclamation point listed as not being in correct format. Instructs to reformat as GUID. Went to disk util and reformatted and it disapears from select a destination.
My questions are.. am I missing something technical about these cards and formating as GUID?
Why will this mount in Finder and also in the destination screen for install if its formatted as FAT32, but wont show up in either as GUID?
Why does it show disk3s2 similar to windows partitions, even though it was formatted as GUID and renamed?
Not sure if I'm having an actual hardware issue with card, or have to do something to modify this to be useable. Tried this on a newer iMac with same result.
View 9 Replies
View Related
Aug 19, 2010
if the latest generation iMacs still have the 32GB limit for Windows partition?
View 8 Replies
View Related
Feb 4, 2012
I've read in one blog that iMac 27" mid 2011 (3,4ghz i7) can support 32Gb of Ram...before buy i like say if someone has installed 32Gb of ram.
Info:
iMac, Mac OS X (10.7.3)
View 1 Replies
View Related
Jul 13, 2009
When I boot Fusion with MacAffee I get a message that there is an updated version of Fusion is ready for download. When I go to the site I'm offered a choice of just Fusion or Fusion with MacAffee. Since the boot message only talks about Fusion should I do the only Fusion download. Or should I get the combined one?
View 1 Replies
View Related
Dec 22, 2010
So I had a 32gb Windows XP partition that I want to upgrade to Windows 7.
I removed the partition via Boot Camp assistant, and when I tried to make a new partition, it's telling me that I have to "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try again."
What does that mean? Do I have to reformat (and subsequently erase) everything on my harddrive? If I have Time Machine set up, will I be able to bring everything back to how it was originally?
View 2 Replies
View Related
Jun 16, 2010
Boot camp went wrong because I had to reboot my macbook while windows 7 was being installed. After that, I deleted the 32gb windows partition. But guess what? Disk utility says that my free space is 468 gb, when before boot camp I had 493gb.
View 3 Replies
View Related
Apr 16, 2010
How's it going everyone, I'm fairly new to Mac and I'm not very technical at all. I just purchased an i7 15" and I'm confused when it comes to 64bit vs 32bit. Does the computer automatically switch between the two or is there something you have to specifically do to run one or the other? For instance, I downloaded Handbrake last night, it asked if I wanted 64bit or 32bit? I have no clue? I bought a powerful machine, I want to make sure I utilize it.
View 4 Replies
View Related
Dec 4, 2008
I have an Late 2008 Macbook pro unibody, 4gb, 320gb 7200rpm. I installed the bootcamp drivers off the leopard CD that came with the mac and all was good! I have since taken it to Australia for a holiday and need to reinstall bootcamp but left the Leopard CD back in the UK. Stupidly, the 2.1 bootcamp drivers on Apples site don't support the Unibody mac! Can anyone please direct me to where I can download the Drivers (for 32bit XP home SP2) for the Unibody Macbook pro? The exact ones that are on the Leopard CD that came with the new Macbook Pro?
View 24 Replies
View Related
Jun 23, 2012
i would like to know if it's possible to upgrade my 13" MacBook Pro from 32bit to 64bit
Info:
iPhone 4S, iOS 5.0.1
View 5 Replies
View Related
Feb 3, 2009
Does anyone know if Web based Java games on the old white macbooks with the intel graphics improve when switching from the 32bit version of Java to Java 6 with 64bits?
View 1 Replies
View Related
Jul 3, 2010
So I'm trying to manually update Graphics driver in Win7 32bit for the Macbook pro 13" mid 2010 version with the Nvidia 320M video card. I download and get this driver: 257.21_notebook_winvista_win7_32bit_international_whql
But it doesn't help me at all, says it can't find any drivers compatible with my hardware, even though I selected all the right menus for my card. I'm trying to play this one game, but it's bugged and I figure if I install a driver that's 5 months more recent it might help.
View 8 Replies
View Related
Mar 22, 2008
I need to populate the bays of my new MacPro 2.66 with 5GB RAM. The stock HD turns out to be a Seagate 250GB HD ST3250820A. I've found them online and wonder if I just should RAID three or four of them as opposed to one Seagate 500GBs or 750 with 32GB cache? These would all be a Raid run by Apple software not a RAID card.
View 7 Replies
View Related
Sep 28, 2008
I made an image of my Windows XP laptop drive using Macrium. I can see the image file there on one of my Mac Pro's internal drives, but Im not able to select in Fusion.. Is there a way to make a Fusion VM from this image? If not, how do I go about creating a VM from my laptops's HD? I'm using Fusion 2.6.
View 9 Replies
View Related
Oct 11, 2009
My Windows XP partition is getting claustrophobic and it's about time I upgraded from an 8 year old OS.
Anyway, what's the easiest way to do this? I assume it'll have to be a clean install to go from XP to 7 and 32bit to 64bit.
I have a fair number of programs and several gigabytes of Steam games which is why I haven't done it yet.
View 24 Replies
View Related
Oct 4, 2010
do i have a 32 or 64 bit default macpro and do i want to set it to 64 bit or leave it 32?
View 1 Replies
View Related
May 17, 2010
McBook, 4 gig Ram 160 gig HD Running Snow Leopard 10.6.3 (Intel Core Duo)
I am running Creative Suite CS5 and noticed all plugins will not work, as CS5 works natively in 64 bit. I have tried opening in 32 bit and the beachball of slow goes on indefinitely and will not open in 32? I can still use plugins in CS4 then export product into CS5, but a bit of a long winded route...anyone else?
View 1 Replies
View Related
May 4, 2009
I am running an early 2008 Mac Pro: 4GB ram (only 3 running in XP) Dual Intel Quad-Core Xeon 2.8 GHz ATI Radeon HD 2600 256MB So over the last couple months, I've been getting some extremely bad and annoying freezing problems when playing Left 4 Dead on 32bit Windows XP Home Edition. The last sound played repeats over and over again with the screen freezing; this has lasted anywhere from 5 seconds - 40 seconds. My frame rate doesn't seem to be making a huge difference, its consistent at 45-60 fps when its on pretty simple settings:
Anti-Aliasing: None
Ansiotropic Filtering: Trilinear
Vertical Sync: Disabled
Multi-Core Rendering: Enabled
Resolution 1650x1050
Shader Detail: Medium
Effect Detail: High
Model/Texture Detail: Medium
Paged Pool Memory: High
At first I thought it might be my Graphics card over heating but tonight I tried it with the case open and a very powerful fan blowing air directly onto the card and the problem continued. PS. this hasn't happened with any other games but it doesn't run Crysis very well but thats obvious because well...its Crysis and even with it I have higher settings on. I've also cleared the computer of any spec of dust, just so you know.
View 4 Replies
View Related
