MacBook Pro :: Upgrade 13" From 32bit To 64bit?
Jun 23, 2012i would like to know if it's possible to upgrade my 13" MacBook Pro from 32bit to 64bit
Info:
iPhone 4S, iOS 5.0.1
i would like to know if it's possible to upgrade my 13" MacBook Pro from 32bit to 64bit
Info:
iPhone 4S, iOS 5.0.1
i was just wondering if this is even possible... i started reading this thread but it was way too confusing for me so if you could explain it to a computer illiterate it would really help me out.
[URL]
How's it going everyone, I'm fairly new to Mac and I'm not very technical at all. I just purchased an i7 15" and I'm confused when it comes to 64bit vs 32bit. Does the computer automatically switch between the two or is there something you have to specifically do to run one or the other? For instance, I downloaded Handbrake last night, it asked if I wanted 64bit or 32bit? I have no clue? I bought a powerful machine, I want to make sure I utilize it.
View 4 Replies View RelatedMy Windows XP partition is getting claustrophobic and it's about time I upgraded from an 8 year old OS.
Anyway, what's the easiest way to do this? I assume it'll have to be a clean install to go from XP to 7 and 32bit to 64bit.
I have a fair number of programs and several gigabytes of Steam games which is why I haven't done it yet.
do i have a 32 or 64 bit default macpro and do i want to set it to 64 bit or leave it 32?
View 1 Replies View RelatedThis article gave me a little bit more understand and also made me feel better that either booting in 32bit or 64bit kernel will not make a huge difference due to hardware limitation.
[URL]
Today I got my new 21.5 base model iMac, along with windows 7 Ultimate. I was wondering if I should install the 32 bit version or the 64.
View 3 Replies View RelatedIm about to recieve my MPro w/8800, and plan to have a dedicated HD for Windows in bootcamp. Windows will be used exclusively for gaming (real-time-strategy games mostly, if this matters).
I am keen on going into Vista, trading a bit of XP performance/stability towards full/hassel-free compatibility with Directx10 and future games, but have no clue whether it makes sense or not to go with the 64 bit version.
I understand this version allows to use much more RAM (which i will have installed on the MPro), AND more than a single core used.
What i dont have a clue about is wether the 64bit version is compatible with all (or grand majority) of games, whether they do actually take advantages of the 64 bit possibility (which im not sure at all, as i believe you have to program it to do so), etc.
I'm not sure which forum this belongs in, but given that its really a vmware question, I'm thinking that applications is the best fit.
Anyways, if I decide to take the plunge and get windows 7, it will be for the express purpose of running within vmware. I have zero interest in running it in bootcamp (I use fedora and boot into that) so basically which version of win7 would provide the best performance. The 32bit or 64bit flavor
I've recently bought a new iMac and would like to migrate my stuff from my early 2006 iMac (first intel mac, 32 bit). There are several ways of doing this, but I'd like to achieve:
1) Identical copy
2) Defragmented drive (previously it was getting very slow)
As I know from using Windows, you cannot simply create an image from one PC and move to another, because of differences in the kernel. The new PC may never boot. I am moving from 32bit to 64bit, so that would be quite a change. Also, should I use the migration assistant, or boot from recovery disc and recover from my time machine backup? Will the latter not result in a more identical system? And, is that desirable? My old iMac has all updates installed, so it should be the same as the new system.
Is the 64bit and 32bit versions of Vista in the Vista Home Premium software? Or do you have to purchase the specific one? How can you tell the difference when looking at the package?
View 2 Replies View RelatedIt appears that for whatever reason, the kernel on my Mac is 32bit/i386, but the architecture is 64bit:
Darwin system.local 11.3.0 Darwin Kernel Version 11.3.0: Thu Jan 12 18:48:32 PST 2012; root:xnu-1699.24.23~1/RELEASE_I386 i386
Though the kernel itself is a universal binary:
mach_kernel: Mach-O universal binary with 2 architectures
mach_kernel (for architecture x86_64): Mach-O 64-bit executable x86_64
mach_kernel (for architecture i386): Mach-O executable i386
Info:
Mac Pro, Mac OS X (10.7)
Yes you read that right. Your brand spanking new MBP will use a 32-bit kernel as default.
You can force 64-bit kernel but some of your hardware will not be working.
So all that marketing crap about the benefits of 64-bit etc are all B.S.
I don't want a million threads about how this will not effect the running of 64 bit apps, etc. because it will. Your 64-bit app will run but it will not be able to address more than 4Gb of RAM.
There are also many more advantages to having a 64-bit kernel.
I know a lot of us have the Elgato Eyetv Hybrid and would love to use it on our Macs in conjunction with Bootcamp & Windows. Well I finally figured out how to do it! All I had to do is slightly modify some Windows drivers.
The hardware being used is very similar to the Hauppauge USB Sticks.
Elgato made 2 versions of the hybrid; the older version without QAM and the newer version with QAM. (It has been brought to my attention they also have a new version out with radio capabilities).
I have only been able to test this on the hybrid WITH QAM.
I was able to slightly modify the Hauppauge drivers which allowed the Elgato Eyetv Hybrid to work under windows using both the Windows Media Center and the standalone player by Hauppauge.
So here is what you need to do:
Go to Device Manager
Vista users: Right click on Computer > Click Properties > Click Device Manager
Now you should see some devices under "Other devices" with a yellow question mark next to them. Both should be called "EyeTV Hybrid" There are two because the USB stick has both a digital and analog tuner.
Right click on either device > Click Properties > Click Details tab > Where it says Property, scroll down to Hardware IDs
If the bold numbers match, these drivers will work for you. (If they don't match please provide me with your numbers so I can try and make drivers that will work for you.)
USBVID_0FD9&PID_0008&REV_0005&MI_03
Now we can close the EyeTV Hybrid Properties windows which brings us back to Device Manager.
Download both the modified drivers (an attachment below) and the manufacturer software here:
[URL]
Unzip and open the manufacturer software, navigate to the Drivers folder, and replace: HCWemBda.inf and HCWemBda64.inf with the modified drives you downloaded from me. (You also have to unzip and open the folder you downloaded from me).
Now go back to your Device Manager window, Right click on one of the EyeTV Hybrid devices with the yellow question mark next to it and click Update Driver Software...
Click Browse my computer for driver software > Click browse and navigate to the drivers folder from the manufacturer's software > Click Ok.
Do the same for the other device in Device Manager.
Now go to the manufacturer's software you downloaded earlier and double click Setup.
Finish the install and you should be Done
So, with Snow Leopard, there is a 32-bit kernel, and a 64-bit kernel. Correct?
As I understand it, it will boot into the 32-bit kernel by default, but if your hardware is supported, you can select the 64-bit kernel.
My question is - where is the list of supported hardware, and how do you select the 64-bit kernel?
My confusion comes from several posts and various articles which all say the first-gen aluminium iMac has a 32-bit EFI, and therefore can only boot into the 32-bit kernel. But I've just downloaded an app called Startup Mode Selector, which shows you your system config, and it says I have a 64-bit EFI.
I'd appreciate it if anyone could offer me some advice on whether to go with the 32bit or 64bit version of Vista on a 4-core 'Nehalem' Mac Pro. I've read that some drivers will fail to work under this version of the operating system - is this the case for the hardware in the Mac Pro (particularly the HD 4870)?
View 6 Replies View RelatedI currently have 268GB on my hardrive.
I have the 17" MBP Unibody so I want to start gaming again, and I have thought about Xp, Vista, and 7 and I have decided on windows 7 because its free and allows for DirectX10.
1.
Now I am trying to conserve hard drive space but should i get the 16GB 32bit or the 20GB 64bit version of windows 7 and how much space should i allocate for the partition?
2.
Games i will be playing:
Counter Strike: Source
Call of Duty: WaW
Maybe Battlefield 2
3.
I plan on getting some newer games since I don't have my crappy computer anymore.
Any suggestions??
Hopefully someone can point me in the right direction.
I have an 8-core 3.2GHz 2008 Mac Pro with 16GB RAM. I've just ordered the EVGA NVIDIA GeForce GTX 285 graphics card and am hoping to turn my beloved mac into a bit of a sexy PC gaming beast for some evening fun. Already purchased Batman Arkham Asylum, Gears of War and an Xbox 360 controller to get me started
I'll cut to the chase. Microsoft are offering a free upgrade to Windows 7 if you buy Vista at the moment so that's not the issue. The issue is 32bit or 64bit for a gaming box - which is the best version to get for performance and compatibility with gaming on windows?
I'm looking to purchase either the 32bit or 64bit version of Vista (with the free upgrade to the corresponding Windows 7 version).
Which is the best to get? 32bit or 64bit? I've been reading that some games don't work well with 64bit Windows. Lots of conflicting articles and comments.
32bit or 64bit Windows... what's the best for a bootcamp gaming rig?
I was told to run Vista 64bit for games, but I was wondering about this� Since many applications don�t even have a 64bit version out and I don�t think games are 64bit, will they all run under vista 64bit? I have a feeling this might be a dumb question, but I just wanted to make sure before I go out and buy Vista 64.
Also do you think windows 7 is better for games? Will it even run games that have not been written for it? Or would I just be better sticking with vista 64 until everyone has caught up and made their apps compatible with the new windows 7? I mean will antivirus programs, ripping apps, etc work under windows 7 without a hitch, or should I wait and just use vista64 for now?
I have an Late 2008 Macbook pro unibody, 4gb, 320gb 7200rpm. I installed the bootcamp drivers off the leopard CD that came with the mac and all was good! I have since taken it to Australia for a holiday and need to reinstall bootcamp but left the Leopard CD back in the UK. Stupidly, the 2.1 bootcamp drivers on Apples site don't support the Unibody mac! Can anyone please direct me to where I can download the Drivers (for 32bit XP home SP2) for the Unibody Macbook pro? The exact ones that are on the Leopard CD that came with the new Macbook Pro?
View 24 Replies View RelatedDoes anyone know if Web based Java games on the old white macbooks with the intel graphics improve when switching from the 32bit version of Java to Java 6 with 64bits?
View 1 Replies View RelatedSo I'm trying to manually update Graphics driver in Win7 32bit for the Macbook pro 13" mid 2010 version with the Nvidia 320M video card. I download and get this driver: 257.21_notebook_winvista_win7_32bit_international_whql
But it doesn't help me at all, says it can't find any drivers compatible with my hardware, even though I selected all the right menus for my card. I'm trying to play this one game, but it's bugged and I figure if I install a driver that's 5 months more recent it might help.
I installed Fusion 3 and 32bit Win 7. I allocated 32GB to it. Now when I check inside I see 21GB free (I have installed MS office 2010 and Smartdraw). I have access to VM ware setting where I can reduce the size of the Fusion 3 from 32 GB to a lesser number and I was thinking maybe 22GB, thus reclaiming 10GB for Mac.Do you think making such a change on the fly will make something go wrong on the Mac side or inside the VM.....BTW, I have the fully loaded MBA 11.6".
View 5 Replies View RelatedI just read the seed notes for Snow leopard latest build and when reading what I can test 64 bit apps with seems pretty much any mac in -08 and -09 except (!) MBA and minis.
Any idea why?
I thought at least the MBA rev B would be 64-bit capable...?
My apologizies if this has been discussed but if so I have missed it.
I've got a mid-2007 C2D MBP with 64-bit EFI and obviously, 64-bit processors.
'6' and '4' on Snow Leopard won't boot into 64-bit mode. I don't need the 64-bit kernel at this point, but I'm mostly curious to see what drivers and apps breaks under a 64-bit kernel and the only way to find out is to try it.
There's a pretty nifty hack involving hex editing boot.efi that works for some suitable Macs:
[URL]
No mention of MBP, and my attempts at guessing offsets and values while hex editing didn't cause any booting issues but didn't result in 64-bit kernel loading, either. Anybody happen to know offset and value in boot.efi to mod for a MBP?
I know this is a real long shot type of question and I'm not expecting anybody to know. But if you do, would love to find out.
Finally home for Xmas since (remotely) buying my mother a Macbook 6.1 over Easter. I've set her up with a few utilites (Click to flash, VLC player, Coconut battery), but Im unable to get 64bit kernel to work (as it does on my 6.2 MBP).
The MB appears to meet all the criteria (64bit EFI, right processor, SL) - but neither the apple sudo terminal command, nor the 6+4 key at boot work in setting 64bit kernel. Any other suggestions?
I want 64bit because it provides improved security (NX bit in HW, less chance of exploits due to smaller market share)
Do i just insert the windows 7 64bit DVD and install normally? I'm worried about the drivers phase. I have the MBP that got released early 2008.
View 3 Replies View RelatedI tried to boot my mid 2009 macbook pro running snow leopard into 64 bit mode by holding down the 6 and the 4 key on the keyboard after shutting it down and then powering it back up again, it won't start up, it's stuck at the apple symbol with the rolling cursor
Info:
MacBook Pro
Model Name:Â MacBook ProModel Identifier:Â Â MacBookPro3,1Processor Name:Â Â Intel Core 2 DuoProcessor Speed:Â 2.4 GHzNumber Of Processors:Â 1Total Number Of Cores:2L2 Cache:Â 4 MBMemory:Â 8 GBBus Speed:800 MHzBoot ROM Version:Â MBP31.0070.B07SMC Version (system):1.18f5Â Â
I know this has been asked numerous times, but most of the answers I found were old and archived. I was wondering whether or not an update or a guide has been released which allows a successful boot into 64bit kernel? Â On a side note, I have verified my computer does have EFI64. However I know in the past that this stil didn't enable a 64bit boot.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
I know by default that Snow Leopard starts up in 32-bit kernel but anyone here boot into the 64-bit kernel? I think to do this you'd have to hold down 6 and 4 keys while booting.
By now almost all 3rd party apps are running 64-bit and all this time I've totally forgot about the 64-bit kernel!
I've just booted up to 64-bit kernel and all apps load instantaneously!