This happened after a software update. I've attempted to repair it and as a last resort, reformatted it. It still freezes, crashes, and/or randomly reboots. Is there anything else I can do?
View 1 RepliesI tried to use Time machine on Mac, so that my external Hard drive was the back up. Unfortunately, I pulled the cable out too soon before it was finished and now the external drive must be corrupt as the Mac won't recognise it. Is there anything I can do so that the Mac recognizes the external hard drive ?
Info:
MacBook Pro
I don't really use automatic backup method, because I have a few computers in the network that I go back and forth. I used a Windows based syncing program to sync all computers of Documents, Music, Photos, etc., but it went corrupt. So I'm not gonna use that method anymore.
I don't like automatic backups because I need to access the only specific files from an external hard drive. When I modify a file and put it into an external hard drive, "Date Modified" section does not change. Which worries me that the drive is corrupt. (The drive was originally used on a Windows machine.) Before I go any further in backup my files, I want to format it based on a Mac since it's primary OS.
How should I go about this?
Is there a different format for Mac and Windows drives?
I want to start from scratch.
I still need to use it between two OSs.
In trying to repair my hard drive, which disc utility said was corrupt, it stopped repairing it because it could not unmount the disc?I booted my macbook pro from my backup hard drive.
Info:
macbook pro, Mac OS X (10.6.8)
 I installed the EFI Firmware update 2.8 on my late 2008 MBP (running 10.5.8) and so far, it's seemed to solve the flicker/screen blacking out issue. I can no longer take screen shots any more without them being corrupted, and sometimes the Finder window gets scrambled and my wife needs to re-boot. I'm guessing a corrupted pref file somewhere. Anyone run into this recently and if so, is there a .plist file I can delete?
View 2 Replies View RelatedI did a software update last night and the firmware update attempted to install. Unfortunately, it errors out with the message:
Necesary resources are missing, corrupt, or do not have the correct permissions. Delete the iMac Graphics Firmware Update and re-download it and run again.
Is it possable to update the hard drive in my Imac
View 6 Replies View RelatedAfter the latest Leopard update, my imac can not find one of the external hard drives attached to it via usb. I have check all the usb ports with other devices with no problems. I checked the external hard drive on another computer and had no problems reading it.
View 2 Replies View Relatedwhere on the hard drive to place the Quicktime update once it has downloaded onto a Mac? I can't seem to find the right location, and now cannot operate iTunes. I am using Firefox. My husband uses Safari, and I think I may have to download for his ID, as well.
Info:
iMac
How do I back up my iMac hard drive in order to update the OS from 10.6.8 to 10.10.1?
View 2 Replies View RelatedMac OS X can't repair the disk - You can still open or copy files on the disk but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can and in Disk Utility:
Quote:
Disk Utility can�t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
so i attempted to back up my files off the drive, but all the files seemed to be corrupt or something, so i panicked and ran diskwarrior instead of going back to ipartition and attempting to recover the drive in there. DiskWarrior sort of "fixed" the problem by making the error messages go away in OSX and in Disk Utility, but the files on the drive still seem to be corrupt giving me such errors as:
The disk is currently partitioned as Mac OS Extended, but maybe i could run it though some recovery programs via bootcamp/macdrive or maybe even in some sort of linux live cd?
So, I just had the original 300 GB hard drive fail in my aluminum 24" inch Mac running the latest update of Leopard. I wasn't able to save it using diskwarrior (diskwarrior said it was some sort of mechanical failure) but I was able to recover most of the data from it by booting from an external hard-drive.
So I went out and purchased a brand new Western Digital Caviar Black 1TB drive. The install went fine, it found the drive partitioned it and installed Leopard successful. Then is crashed and disappeared when I left it alone to run all the software updates. I came back and the computer was stuck on "Restart Required" after downloading all the updates.
I went to hit restart now, and the system just hanged, wouldn't do anything. So I hard powered down the system and restarted it. It came up with nothing, just stuck on the White Screen of Death. So I plugged the external drive back in and booted from it. Mac OSX couldn't find the drive and diskwarrior would crash if I tried to run it. I tried to boot up from the OSX start-up disk and it couldn't find the drive either.
So I took the case apart and made sure all the connections were solid and the drive was mounted correctly. Everything looked fine so I plugged it in and it started up fine. Finished the updates and the iMac ran great. So I thought maybe it was overheating, so I've installed smcfancontrol and started to monitor the temp of the drive. I also took the mac apart again and sucked out any dust in the fans or vents. The drive never goes over a 105 F, so it doesn't seem to be overheating.
However, this is where the problem is consistent: everytime the iMac goes into sleep mode, it crashes and the iMac is unable to find the hard-drive again. Unless I unplug it completely for 5 minutes or so. Once I unplug it, it finds the drive and operates like a champ.
I have updated to OSX.7.4 but but now my external hard drive icons have disappeared from my desktop? The disks are recognized in disk utility and the "show external disks" is ticked in Finder Prefs. Disk Utility did show some errors in 2 or 3 of the disks which have been corrected. It is just since updating to the latest version of Lion this has happened. They are linked via eSATA cables and are in two Sonnet containers (4 hard drives in each). CF cards show up OK. My back up Chronosync, fails to run as it does not recognise the disks.
Info:
MacBook Pro, Mac OS X (10.7.4)
I purchased a G5 in 2005. Never once used the drive for DVD. So I decided to use it today, and it doesn't work. I tried to burn a DVD that didn't work. The drive doesn't even recognize it. I did some research, I came to the conclusion that I have to update the pioneer d112 firmware. Seems simple but the pioneer update is for windows format!
Info:
Mac Pro, Mac OS X (10.5.8)
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies View RelatedMacbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies View RelatedToday I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
I bought a new 500GB WD hard drive for my Late 2008 MacBook to upgrade from my 250GB drive. I have a hard drive enclosure, but I was wondering if when I install my 500GB hard drive, would I be able to use the enclosure to transfer files from my 250GB drive? I hope this was specific enough to get a clear response. If not, I'll try re-wording my question.
View 7 Replies View RelatedMy PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View RelatedI know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedI have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies View RelatedI just booted into Windows and saw that there were some Windows Updates available and it asked me to reboot the computer however it failed to boot into Windows. So I restarted and tried to boot into OS X instead, but that didn't work either.
So I put in the OS X install DVD and checked out Disk Utility. Turned out that all my partitions where screwed up. There were 3 partitions listed as Windows_ldm, with incorrect sizes (I had 4 partitions before).
Long story short: I'm now reinstalling OS X and I lost everything I had on the drive, I think. I'll try some restore software once I've gotten OS X installed.
A little pissed right now... How the heck can Windows F up the entire drive?
I have a 3 year old Macbook pro which is still going strong. It's my birthday soon and I'm thinking about treating myself to a new 500 GB Hard drive. I have looked up how to upgrade it myself on iFixit.com and it looks OK but I'm just checking here to see what the general level of opinion is about difficulty / risk of buggering it up. The link to the process is here: [URL] I paid to upgrade the stock HD to a 250 GB whilst it was still under warranty but since that has expired now I don't think I have as much to lose by opening it up myself.
View 10 Replies View Related