I purchased a G5 in 2005. Never once used the drive for DVD. So I decided to use it today, and it doesn't work. I tried to burn a DVD that didn't work. The drive doesn't even recognize it. I did some research, I came to the conclusion that I have to update the pioneer d112 firmware. Seems simple but the pioneer update is for windows format!
Info:
Mac Pro, Mac OS X (10.5.8)
I have a problem described by Apple in document Power Mac G5 (Late 2004) 1.8GHz models stop responding randomly.
How can I update the firmware because my G5 1.8 screen is blank? Thought that I could make my G5 1.8 as a hard disk for my MacBook, or I may try to update over the network. Is there a risk of corrupting my MacBook if I try?
Information:
G5 1.8
Mac OS X (10.4.10)
McaBook
how can i update the firmware/bootrom to 4.2.8 for my power mac g4 ( gigabit ethernet) ? i am using mac os x 10.4.11, and dont have a disk with mac os 9.
View 11 Replies View RelatedAfter using Open Firmware Update my G4 went into a crazy circle. At first, it was impossible to start up, and when it was possible, just for a couple of seconds, and then the translucent screen asking you to restart the computer pressing for a few seconds the start up button.
Info:
Quadra 605, G4 Desktop, IMac 500, eMac, iMac G5 PPC, iMac G5 Intel, Mac OS X (10.5.7)
i've recently ask in the forum for expanding my G5 and G4, because the DVD-RW stop working on both. I've bought a Pioneer DVR-112 and install it on the G4 (under panther). Startup the mac and it was there on the system profiler, but when i'd tryed to open the tray, it couldn't go out because it was getting jammed bye the mac tower (some plastic thinggis around the drive hole), so i've notice that the previous DVD-RW didn't had the front part on the drive that says DVD-RW and all the stuff. So, shutdown the mac and removed the drive to see what it can be done. Installed again and now the mac don't recognize the drive.
Information:
G4 AGP 400mhz, Mac Mini, Powerbook G4 12
Mac OS X (10.4.11)
External DVDRW 16x DVDirect GSA-5169D, 768 RAM
I have a PowerPc Mac G5 running Leopard 10.5.8 and I have been upgrading some parts. I installed the Pioneer DVR-A18L, which is the European version of the DVR-118L that is being sold as Mac compatible everywhere. When checking on System Profiler it is recognized as the Pioneer DVR-118L and the following:
PIONEER DVD-RW DVR-118L
Firmware Revision: 102
Interconnect: ATAPI
Burn Support: Yes (Generic Drive Support)
Profile Path: None
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RAM, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
So, at the moment the drive reads CD's but it doesn't get to play them; on iTunes it reads the tracks and gets the titles and stays hanging and doesn't get to play them at all. When inserting DVD's it spins for a while until it says that a blank DVD/Media have been inserted. I thought it would work straight away as the DVR-118L.
I bought a second dvd drive, a 216d Pioneer, for my Nehalem 2.26 octad. After a reboot it will work for a bit and then give me an error message (code # 0x80020025). The second, Pioneer drive (along with whatever disk was in it) is then no longer visible via the finder. A reboot makes the drive and disk visible again, but the error will invariably return. I believe the firmware on the drive is current (1.09) and it is listed as having "generic drive support" system profiler. I haven't had any luck tracking down a solution in this or other forums.
View 2 Replies View RelatedI'm dying to retrieve my info from my old HDD in my MBP but I keep getting all sorts of ideas/advice about the info on the HDD won't be retrievable if there's a BIOS/Firmware password there.... My main focus and concern is all my mp3, avi, jpg, Jpeg files; I care zero for the programs cause I can always get them back...
Info:
MacBook Pro, Mac OS X (10.6.6)
Transfer information from one hard drive to another hard drive
Info:
PowerMac, Mac OS X (10.5.8), G5 dual 2.0 processors
I need to back up hard drive to an external hard drive. How can I do this automactically?
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
Superdrive Firmware Update 3.0 fails each time, /Applications/Utilities/SuperDrive Update.app asks me to quit all apps and try again which I did but of no. I also retried with a reboot.
Info:
MacBook, Mac OS X (10.6.8)
I installed it 2 times with the software update e 1 time manually..
What's wrong? This is from the system profiler
Quote:
Versione Boot ROM:MP51.007F.B01
Version SMC (sistema):1.39f11
Versione SMC (slot processore):1.39f11
is the 1.39f11 the correct version?
Just received SuperDrive Firmware Update 3.0, MacBook EFI Firmware Update 1.4, and AirPort Client Update 2009-002 1.0 on Software Update for 13" Unibody MacBook.
View 2 Replies View RelatedMy original "home" hard drive in my G5 died and I'm in the process of attempting to replace it, and I figured I would install Leopard as long as I was at it.I purchased a 500GB Maxtor MaXLine Pro Enterprise 7200RPM 16MB Cache SATA I/II 3.0G hard drive and installed it, no problem. However, when attempting to install Leopard, the installation DVD doesn't see it as a volume.I'm thinking I have to initialize my new hard drive first, but since I have no other internal drive available (the old one is dead), I can't launch Disk Utility to do this.I have Tech Tools Pro, but it doesn't appear to come with a tool to initialize a drive.
I tried booting up using the AppleCare CD to see if that had a tool on it, but the computer wouldn't boot up with it (although it did boot up with Tech Tools Pro).Is there another tool I need to be able to boot up from the CD-ROM and perform an initialization on my new hard drive?
Information:
G5
Other OS
Leopard
I got a powermac G5 Quadcore with 1 internal harddrive. I wanted to replace the drive + add a second drive and then install Leopard on two ultra fast drives preferable in raid0 if possible.
But when I add the second drive Disk Util can't find the drive. I tried swaping the drives and it's always the hd sitting in the bottom tray that can't be found and not a specific harddrive. Therefore I'm thinking it's the motherboard / power supply, sata power cable or sata data cable. I tried to swap the sata data cable did not help anything. I tried just having 1 hd in the computer in the bottom slot still not possible to find the drive, therefore I'm thinking it's not a powersupply problem but I might be wrong.
Anything I could have forgot to check or do with the new drives to make it visiable?
I tried to install Leopard on the drive I could se (after trying for a day to find both hd's from the installer disk util to make the raid) - but it did not help anything in Leopard I still can't se the second drive.
Sata = no jumpers right?
Could filesystem on the new drives have anything to say?
Anything else?
I'm affraid it looks like I need to have the computer to service to have it fixed for something that never worked appraently and I don't have warrenty anymore
I've have an extra internal 500GB in my G5 and I would like to mirror it to my external 500GB HD (FW400) and repeat this process once a week. Don't want backups just want to mirror. Is it possible? If so what software should I use?
Information:
Powermac 2xG5
MacBook 2.0
MacbookPro
Mac OS X (10.5)
Airport Extreme
About 2 years ago, I added a hard drive in the second hard drive compartment. I would like to replace it with a recently purchased 1 TB SATA hard drive that is desperately needed, but the hard drive in the second compartment will NOT budge whatsoever. I've tried wiggling the hard drive side to side for hours, bloody scratched up hands, screwdriver method Apple suggests, chop sticks that another reader suggested, even a string with a knot to no avail. I don't have rubber clamps as one reader suggested. Does anyone else have any other suggestions besides going to a store and paying them to remove it?
Information:
Powermac G5 2G, G4 1.2, Powerbook G3, 500
Mac OS X (10.4.11)
Have successfully installed a Seagate Barracuda 160GB internal HD (2nd HD) and it's icon is mounted on the desktop. I used Disc Utility to format the drive (Mac OS Extended-Journal), but was unable to install Tiger because of a faulty install DVD (I think). I tried the Panther install DVD's that came with the G5, but am unable to open the the first DVD of that set either (get the grey screen with no wheel, with strange color lines).
More importantly, the drive somehow has a complete duplicate of my other drive. Everything! Also, it updates with things that that I download or add to my Panther drive. How is this, if I did an erase and format using Utility? I'd like to use this 2nd HD as a backup HD (if I can ever get an install DVD to open). Why doesn't the 2nd HD show in the Start up Disc Window? How do I successfully erase it and format this 2nd HD? How would I run a different OS on this 2nd HD?
Information:
G5 dual 2.0GHz
Mac OS X (10.3.x)
Powerbook G4 1.5 - OS 10.4
I am still just a little confused about installing OS X onto the second (new) hard drive.
Questions:
1. Is it necessary to install an operating system? What are the advantages of doing so? Can I use it without installing?
2. If I do install, do I have to buy another version of OS X or can I use the same one I installed on my first hard drive?
Information:
PowerMac G5 dual 2.0
Mac OS X (10.4.11)
I have royally screwed up! I want to erase the hard drive on my Power Mac G4 to prepare it to go to my son. I thought I was doing it right, but had forgotten to put the energy saver on "never turn off" so the screen dims when I try to continue with the erasing. Tried to start over with an install disk in the tray. Now can't access the original disk.
View 14 Replies View Relatedjust checked software update.
downloading now.
Need to remove a firmware password on a G5 2.7 Powermac bought on ebay.Have removed half of the ram and tried to reset pram no help. Removed battery, no help.Former owner forgot password, never logged out.
Info:
Powermac G5, MacOS X (10.5)
I am a photographer. I use 4 X 1TB LaCie external hard drives to store my digital images. 2 as masters for different business segments and 2 as their back-ups. They are daisy-chained using Firewire 800. Recently my G5 has stopped recognizing one of the drives. Is there any way to get my machine to re-recognize the missing drive? I have rewired the four drives to see if there was a problem with the cabling, but this does not appear to be the case. I am coming up to the 1 year warranty period on this drive and need to get it back to LaCie if there is no other solution.
View 6 Replies View RelatedI've had my G5 for a couple years. I keep it under my desk, so I don't hear much from it, but I have noticed that the hard drive is constantly spinning. It's been doing it for as long as I can remember. Any ideas why, and whether I should expect a failure because of it?
View 2 Replies View Relatedi tried the online support procedure and all i get is a message to fill in my serial number followed by "your model is no longer under waranty. contact a dealer..." although the link that brought me to that page is supposed to be for do-it-yourself-instructions. thx for a lead. my G5 is sitting in pieces til then.
Information:
Dual Core G5, 4GB, 20" Cinema Display, NV7800GT, 4GBRAM
Mac OS X (10.4.10)
I defraged my hard drive with Tech Tool and when doing the reboot, the G5 powers back on, the grey apple shows up then the screen goes to a blue background with just the mouse pointer showing.
Information:
iMac, G5
Mac OS X (10.5)
5th Generation iPod 80gb, 16gb iPod Touch
My mother-in-laws Power PC Mac Mini stopped working the other day. After booting to disk utility and seeing that there wasn't a hard drive mounting I assumed the hard drive was dead. I ordered a replacement from OWC, opened the mini, and put in the new hard drive. Now I can't get the mini to boot from CD all I get is a blank gray screen and eventually the folder with a question mark icon. I was under the assumption I could boot to disc again, format and reinstall on the new hard drive. I also can't get the CD to eject but it is spinning up.
View 7 Replies View RelatedI can't seem to find any instructions online about how to do this, step by step. Want to make sure all personal data is erased. I'm interested in performing a full format that at the very least zeros out the data on disk.
Info:
Power Mac G5, Mac OS X (10.7.3)
When I try to create a new folder and error pops up. It reads: "The operation could not be completed. An unexpected error occurred (error code - 50)."
Info:PowerMac, Mac OS X (10.5.8), G5
Wish to upgrade my PM G5 model 7.3. (June 2004). I have a 2 GHz dual core. Most 3,5" SATA HD today are SATA-300 and SATA-600 could either of these SATA HD be used in my G5, or is there some other specification on the SATA that I need to know before I purchase it? I am looking for two 1 TB HD to upgrade.
View 2 Replies View Related