I am attempting to install software on my new MacBook Air 13", with my LG Portable Super Multi Drive. It works perfectly on my MacBook Pro, and other macs, but when I plug it into the USB port of my new MacBook Air, it spins, acts like it wants to load the disk, but it doesn't !
Info:
MacBook Air, Mac OS X (10.7.4), 2012 13"
I have 2 Macbook Pro's, a 2009 and this brand new one I got today. My external hard drive is a 1 TB clickfree. It has worked for months on my old Mac but when I plug it into my new mac it doesn't even show up in finder or disk utility. I tried the USB ports with another device and they work fine. So it isn't a hard ware issue. The cables are USB 3.0. The external hard drive model number is HD2037N3.I have tried taking everything off (huge pain) and reformatting the drive and still it doesn't recognize it! how I can get my Mac to recognize it?
Info:
MacBook Pro with Retina display, iOS 5.1.1
I recently installed the intel g2 SSD. I bought the retail version and it came with a small minuscular cd. Well, I tried putting this small cd into the superdrive and it wouldn't even recognize it. Me being dumbfounded by this, I tried putting in the snow leopard cd and that got stuck too. Luckily, I was able to restart a couple times and shake upside down along with using pliers to remove the SL disc but this small intel disc is still in here.
View 3 Replies View RelatedSo, I have a 13" white MacBook that is about three years old. Recently, the Combo Drive stopped reading CD-Rs (possibly all discs in general, but I only ever use it to burn CDs, so I wouldn't have ever known), so I decided to try to install a new Super Drive myself.
Following a guide on [URL], I installed the new drive, but when I turned my computer back on, it was not recognizing the drive at all. System Profiler was saying "This system does not contain any ATA devices. If you have any ATA devices installed, check that they are connected and powered on." I was then able to reinstall my old Combo Drive, which my computer recognized immediately. Thinking that I may have just not connected something tightly the first time, I tried a second time. Same thing happened.
So, my question is, is there anything I may be missing or does this definitely mean the drive is defective? I just want to make sure I'm not sending back a functional drive before I go ahead and do so.
My little brother bought an old iMac G4 off eBay about six months ago, against the recommendations of my parents and I who told him he should save until he could afford a slightly better machine. He's been improving it here and there when his savings from lawn mowing and birthday has allowed and his latest investment was the 10.5 operating system. When we went to install on the G4, my brother was shattered to find that the machine wouldn't support it. I investigated and found the problem was due to the G4's 800mHz processor. Not a component he could easily switch out. So after a quick flick around, I found another G4 that I considered could actually be a legitimate investment, given the parts we had. The seller claimed that it was perfectly fine, only lacking a working optical drive and hence, also an operating system. Both of which we had.
The second G4 arrived last week and I successfully switched the working optical drive from the old G4 with the "broken" one. Just to make sure I wouldn't lose the screws holding it all together, I installed the "broken" optical drive into the old G4 as well. Then I went to install Leopard. The new G4 has a 1GHz processor and it recognised the Leopard install DVD at boot. It presented the loading screen with the Apple sign and the rotating loading wheel, but wouldn't progress past this. Every time we tried to boot from the install DVD, it would present this screen for around a minute and then the Apple sign would be replaced by a prohibited sign. The booting process never got any further than this. I talked to a few people and ended up installing Leopard via target mode, assuming there was something a little sus with the harddrive which would be resolved once the OS was in place. But wherever the problem lies, it still remains. The G4 now boots successfully from the harddrive and operates fine, but refuses to recognise the optical drive. Here is my chain of reasoning:
- The optical drive in the G4 is not at fault. We know this because it operated fine in my brother's first machine.
- The hard drive is not at fault. We know this because the OS installed and now boots and operates without problem.
- The OS is not at fault. We know this because I performed an almost identical installation (minus target mode) using the same install DVD only days before on a G5.
- My installation work is not at fault. We know this because I performed an identical installation of the "broken" optical drive in the old G4. An interesting side note: the "broken" drive is working fine in the old machine. It is not as broken as the eBay seller thought.
I don't know a whole lot about computers. Most of what I learn is from trial and error problem solving like this. My question is: where does the problem lie?
Info:
iMac
My shiny new Macbook Pro has already had a logicboard (Mac-ish for motherboard) replaced due to this. Games (tested Battlefield Bad Company 2 and GTA IV) crash within a few minutes with the screen freezing and showing random colors as the sound starts stuttering and the only solution is to do a hard restart - see image below. GTA IV tells me that it only recognizes 60 MB VRAM so I guess that the problem is with the graphic card not being able to use the computers onbard RAM (8 GB Corsair Vengeance). The RAM doesn't fail any tests and the computer works like a charm in OSX for days on end, even with heavy Lightroom/Photoshop use. Drivers are up to date.
Info:
MacBook Pro (13-inch, Mid 2012), Mac OS X (10.7.4), Intel HD 4000
My slot leading super drive has just quit ejecting the cd inside. I tried 5 different ways to eject it but none work.
Info:
MacBook Pro (13-inch Mid 2010), iOS 7.1
Yeah, I know its probably way too early for me to be asking this question but if I purchase the new MBP (specifically the 15" 2.3 256 SSD) will I (in the future) be able to replace the hard drive with a bigger one? I'm asking because I don't have $3500 to spend on the best optoin available. Some people are suggesting that parts may now be soldered in place to make these laptops so thin.
I'm not really expecting an answer today, I'll buy in the next few weeks, but in case anyone feels like cracking open their brand new baby and telling us about it, feel free to share (and post pictures!)
I just bought a new MacBook Pro. I had a 2010 MBP and kept the hard drive (Hitachi 500gb 7200 rpm) from that computer. It ws running 10.7 and worked fine. It still boots up perfectly on my MacPro so I know it works.
I tried to boot the new MacBook Pro using the old drive but I get a circle with a line through it. I have tried to boot using Firewire and even installed it into the new MacBook Pro. I then tried to re-install OS 10.7. I just downloaded it from the App Store for my MacPro so I tried to use it to re-install. It will not work on this new Macbook Pro. I had to download a version specific to this computer (using the "recover" disk). I takes 1.5 hours to download and then it still didn't work. When the computer reboots after the download and restarts I get the same **** circle with a line through it. The new "manual" is a joke. There is no reference to upgrading drives or memory. Did Apple decide to make their new laptops inaccessible to the owner? I can't find any info online and at the Apple store today they told me they knew of no reason that the drive wouldn't work.
Info:MacBookPro, Windows XP
I was thinking of removing my DVD Superdrive and adding a SSD drive. Will I be able to put the DVD drive in an enclosure and use it as an external drive?
View 5 Replies View RelatedI read this somewhere but i cant seem to find it anywhere on google.
View 4 Replies View RelatedSo I have a Macbook (late 2008 model), and the optical drive essentially went bye bye. If I put a disc in, it will have trouble recognizing it and then it will eject out. Anyways, last night, I did some maintenance on OnyX and it said that my volume needs to be repaired. Even Disc Utility failed to finish and said that the "filesystem verify or repair failed."
The short of it, I need to put the Leopard disc in there and do a disc repair. However, is there a way, via firewire, where I could actually use my iMac's optical disc drive in place of the Macbook and connect via firewire, then do the disc repair? If so, what would be the specific way to do this?
I have a MacbookPro. The factory fitted DVD/CD drive plays dvds fine but spits out CDs [even originals]. I have Windows XP installed via bootcamp which doesn't cause me any problems.
View 6 Replies View RelatedHow do I format a new (replacement) hard drive without a disk for a 2012 13" Mac Book Pro? I was running 10.7.5 Lion.
Info:
MacBook Pro (13-inch Late 2011), iOS 7, Just replaced a failed hard drive.
My next Mac will be a laptop, and I will NEVER need the Macbook pro's power. I just web-surf and listen to music mostly. I only use the optical drive to watch dvds. But I have a separate player for my much larger TV now. So for say 99 percent of the time, an optical drive would be unnecessary. But I would buy apple's separate optical drive; which I think is a good idea. On my present computer, a first generation Mac Mini, the DVD drive is obviously obsolete now, especially when it comes to Blu-Ray. But what if a like in 2 years a new optical format comes out, or at least a much faster version? If I had a Macbook I would be stuck, never being able to upgrade the internal drive. If the Macbook's optical drive was easily upgradable, then this would be a no brainer.
View 5 Replies View RelatedSo I have a 2.2GHz SR MBP, and the superdrive just went out on me. It will read and write to CDs, but won't recognize any DVDs that I insert into it. I bought a USB enclosure and DVD drive, and it works fine to read and write to DVDs when in Snow Leopard, but I am unable to boot from it (specifically so I can install Windows 7, but I can't boot SL either). I reboot and and hold down option, and only see Macintosh HD, not the disk I'm trying to boot off. I've cloned SL to my flash drive and I can boot off that fine, but unfortunately I'm unable to do that with Windows...
Any ideas? I've googled it and it seems like booting off a USB optical drive is supported, so I'm unsure why it's not working for me...
I had a MBA. I needed more RAM, higher CPU and larger drive capacity. So I changed to MBP. What I dont need is the optical drive. Apple should ditch the optical drive in MBPs or at least have an option not having an optical. Instead more battery and 2 disk bays.
View 24 Replies View RelatedHow do I eject a CD that won't come out of the optical drive on a MacBook Pro . I have tried the ejcct key on the keyboard. There is no longer an eject disk on the drop down menus.
Info:
Mac OS X (10.7.3)
There is the hardware test, but it does not seem to include the Optical drive, I did the extended test and it says that everything is working fine, obviously it is not, everytime I insert a CD/DVD it plays it right, but it does not come out on its own and i have a hard time to get it out somehow, this happen exactly 1 week after the guarantee run out! I have a MacbookPro 15 inch 2.4GHZ, 2GB Ram 250 Hard Drive?
Info:
MacBook Pro, Mac OS X (10.6)
I have a time machine backup on external drive.
I would like to:
1. clean install Lion on the new SSD (120 GB)
2. restore apps from my backup on the SSD
3. keep only data on the existing HDD
My questions:
What is the best way to make it?
Can I just keep the existing system on my non-SSD HDD, and after having Lion on SSD keep just data and delete the system libraries? Or is it better to format the whole disk and restore data from time machine backup (so it is not fragmented..
Info:
MacBook
Pro, Mac OS X (10.7.3), MacBook Pro 2010
how do you replace the optical drive on a macbook?
View 1 Replies View Relatedsince 2 days my optical drive makes one very strange noise every time in "wake it up" or turn it on. The sound is done three times. I realized today that now I'm not able to put a disc into the drive, instead of "absorving" the disc, the drive expels it.
Info:
MacBook Pro, Mac OS X (10.7.2)
I want to keep the optical drive constantly spinning. I am running music for a dance recital, and all their music is on CDs and I would prefer not to rip it in. My problem is that for the rehearsals, every time they rehearse a new song, I have to wait minimum 10 seconds for the drive to spin up and load the song. Is there any way I can keep the drive spinning until im done with it? Or a way to temporarily load the CD into RAM?
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), 2.2GHz i7, 8GB RAM
For example: to play The Sims 3... it requires a disc. Or watching a movie. Or importing music.
View 1 Replies View RelatedI'm going to purchase a Crucial M4 128GB SSD for my Late 2011 13" i7 Macbook Pro. I don't use my optical drive at all, so I figure I may as well swap that out for my current 750GB HDD, and put the SSD in the main harddrive bay. I know full well how to physically install the respective drives, but my confusion comes when cloning the current HD onto the SSD, then moving all your media files (music, movies, documents etc) over to the HD, while keeping your system files and applications on the SSD.
So what I really need, is a PROPER in depth guide from the start of the setup process (First boot after installation of physical drives) detailing how to copy my system files and applications over to the SSD so I can boot from it, while keeping my data & media files on the HD and being able to access them all as I normally would through finder.
Info:
MacBook Pro, Mac OS X (10.7.4)
I've installed a Crucial M4 256GB SSD into the traditional hard drive bay of my Mid 2009, Macbook Pro (5,4). I started getting beachballs immediately after the least bit of intensive CPU usage and pinpointed the problem to be the faulty EFI 1.7 firmware update. I then downgraded to EFI 1.6, and the beachballs ceased, but the problem now is that the Hard Drive controller now only allow for up to 1.5 GB/s interfaces. With that, I'm now only using 25% of the speed potential of my SSD, which is quite frankly a waste of money.
I'm thinking of installing an optibay, in place of the optical drive and installing the SSD there, leaving my original hard drive in the original hard drive bay. The problem is, I don't know if this alternative will be worthwhile, as I have no idea how fast the Optical Drive's GB/seconds are. how fast the optical drive connector's GB/seconds is? If it's anything faster than 1.5, I'm definitely purchasing an optical bay for my HD.
I am thinking of buying the new macbook pro with retina display.I do not intend to get and external optical drive.I want to split the hard disk and install a windows 7 ultimate, which I own and have as an CD image ( ISO file ).
how can I install windows from my ISO without burning it into a CD or creating an external drive? is it possible?
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
My Macbook 1.83 GHz needs a replacement optical drive. Will the one from my iBook 800 MHz G4 work and fit in?
View 1 Replies View RelatedWill a drive from the original Gen work with the new 11.6 MBA?
View 1 Replies View Related My friend is offering me his 2008 macbook pro for 650 should I do it here are the specs
Model Family: MacBook Pro
Display: 15"
Processor Type: 2.6GHz Core 2 Duo
Model Number: A1260
Color: Aluminum
Factory: China
Production Year:2008
Production Week:22 (May)
Production Number:774
200 gb hd
4gb of ram
also apple care til jun 11
OK so I bought the computer for 650 from my friend and soon after buying found a problem. The problem was the optical drive not reading all the disc that I put in the system. So I took the macbook pro to apple they installed a new super drive. I get home today and try to install snow leopard and have a issue. The way I went about was starting up holding the option button and waiting to boot from the disc for a fresh install. First time I tried I got a symbol that look like the restricted sign you see when you cant smoke in a area ect... So I restart and try again this time I get to the install screen click does the estimation ect.. 34 minutes than goes to 28 minutes pretty much has frozen there now, and after waiting all this time about 20 minutes I get the spinning beach ball. Also forgot to say that the super drive is now super dooper annoying loud and make odd sounds too with vibration. So I guess make another apple gen bar apt? And have them possible replace the super drive again?
