MacBook Air :: Printing To Kodak Hero Printer - Pages Coming Out Blank
May 14, 2012I am connected to a kodak hero 5.1 printer have managed to print sometimes, now everything I print is coming out blank?
Info:
MacBook Air, Mac OS X (10.7)
I am connected to a kodak hero 5.1 printer have managed to print sometimes, now everything I print is coming out blank?
Info:
MacBook Air, Mac OS X (10.7)
When attempting to print a .pdf file on an HP 2100 located at 192.168.1.120 on our LAN, Mac iMac OSX 10.5 produces only the following header and then _m a n y_ pages of blank paper -- %!PS-Adobe-3.0%APL_DSC_Encoding: UTF8 %APLroducer: (Version 10.5.4 (Build 9E17) This printer works just fine printing .pdf files from the Dell XP also located on the same LAN.
View 3 Replies View RelatedIve got a Kodak all in one wireless printer but my macbook pro is saying it does not recognise it.
Info:
MacBookPro
I have a HP Photosmart C4200 Series (C4280 to be exact). I have recently installed Snow Leopard (was using Leopard before) and this printer shows as supported in Snow Leopard.The problem I'm having, is that when I go to print a document from Microsoft Word (Office 2008) for Mac, all I get are blank pages. I printed something from Text Edit and it comes out fine, but files from Microsoft Word come out blank. Also, the "Test" pages come out fine as well.
I have been printing files for months and months now from Microsoft Word, but this is the first time I have tried in Snow Leopard.Does anyone know what is going on? I really need to print stuff since its for school.
I can't find any Kodak files on my Mac Air, I thought I had removed it fully, but every time I start my Mac it asks me to allow or deny access to that Kodak printer software.
View 7 Replies View RelatedUpgraded my iMac (2010) from Mavericks to Yosemite yesterday. Since when, anything I try to print to my Kodak printer grinds to a halt after there first few seconds of starting to print. The printer will print fine from another laptop. It will print test pages and direct photocopies all without a problem. Doesn't matter whether am connected via wireless or USB, the same thing happens. Am thinking I should possibly try to 'downgrade' back to Mavericks - if that is possible.
View 2 Replies View Relatedi have mac OS x 10.4.2 with iproof power rip x 7.19
using Epson Stylus Photo 1290
when i print more the 2 pages after each page the printer take out 2 blank page and than stops (i have to press its bottom to make it pull the next paper)
if i don't press the bottom or sometime in a middle of the printing page i get an error "the process usb stopped unexpectedly with status 81"
after a while the printer stops and i have to make it start again
I have a Kodak ESP 3200 ink jet printer that normally does an acceptable job with non-critical illustrations etc..However, when I print photos, I would like to have appear more closely to the colors of the photos when they are displayed on my iMac when photo paper is used.How can I caliabrate either or both my printer and iMac so that the colors of the printed photos more closely match what is shown on the iMac?
Info:
iMac Snow Leopard / MBPro Lion, Mac OS X (10.6.2)
I wondered if it was in anyway possible to print wirelessly from my MacBook. Seems simple enough right? Well, the thing is I don't have a wireless printer. It's a normal inkjet Epson and it's connected via USB to my desktop which is running Vista Home Premium. Is there anyway I can somehow forward the document to my desktop and it'll start printing? Oh yes, my router is standard, it doesn't have any USB ports. Also anyone know any wireless HDDs? Time Capsules rather pricey especially in the current climate.
View 3 Replies View RelatedI have connected my Macbook pro to the printer and all looks connected, except when I print error message reads not connected?
View 2 Replies View RelatedI'm trying to connect my leopard macbook to a Canon Pixma MP210 that his hooked up to an XP machine. Sharing is enabled in XP on the printer and I can successfully add the printer to the mac in system preferences. I've downloaded the proper drivers from Canon's website and selected them for the printer. The problem is that when I try to execute a print job, the print queue comes up and hangs on status "printing."
Also, on the XP machine, the print queue recognizes a job is being requested but the status hangs on "spooling." The document never actually prints. Finally after a couple minutes, the print queue in the mac has an error stating: "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error."
I have a Windows XP Desktop with a Epson Stylus S21 connected to it with bonjour downloaded onto it. Using the step-by-step guides, I've managed to connected my MacBook Pro to the printer over the system and have managed to print. The only problem is, when I do send a document to print from my MacBook it only prints out a blank page with nothing printed on it. I know that the two are connected as I can send things to print, and it's not an issue with the printer as my desktop is able to print fine.
Info:
MacBook Pro
like im tryng to make a phamplet on pages but instead of having that theme i have a blank document and i set the blank document to my defult, how doi i change that?
Info:
MacBook Air, iOS 5.0.1
When I try to print any document from a web page, i get an empty page, only the header line at the top of the page. Y work with Safari (last version) but the same I have with Chrome. From other sources there is no problem. I have two HP printers, one laser BW and a color HP Deskjet D1663.
My computer is a MacBook Pro 7.1 with Lion 10.7.4
Info:
MacBook Pro, Mac OS X (10.7.3), 8 Gb RAM
My Macbook recognizes the IP address of the network printer on the network I'm on here at the church I work at, but I cannot print to it because it requires an authentication track. When I click file>print in an excel sheet or a word document the print screen comes up. In the drop down menu where it says "copies & pages" there should be an option for an authentication track or number, but there is not. It is simply not there. There actually should be a lot more options but there are not. I simply have a few, scheduler, summary, layout, etc. What can I do to get to the point where I can authenticate to print on that printer?
View 1 Replies View RelatedI've got a four year old Macbook Pro 17", running 10.5.8 OSC, 2.33 ghz, 3gb 667 mhz ddr2 sdram.
The power cord was unplugged, although the battery was fully charged. I plugged in my Canon printer for the first time in over a year. It printed half a document, then the computer shut down. I pushed the power button and got the start up chord, but then it shut down again. Tried this a few times. Then I unplugged the printer and plugged in the power chord. it started, but it's very slow, and I keep getting the pinwheel.
We can't figure out how to change our printer settings to print in draft mode. The system only allows for standard mode which is very slow printing. Our HP Office Jet 4680 allows for draft mode printing.
Info:
MacBook, Mac OS X (10.5.8)
After adjusting the paper size or fit to page in word or excel, the printing document often became blank even if it shows normally in preview.
View 1 Replies View RelatedWe have a 2007 white MacBook. It's connected to an HP all in one color laser printer, but we also want to connect a second laser printer. We've tried both an HP and a Samsung, which the boxes said were compatible but when hooked up and we try to print we keep getting a Printing Stopped message, even when we click on "Start Printing".
View 2 Replies View RelatedHow do I go about print specific pages from a file/PDF? Say I want to print random pages like page 5, 9, 14 that do not go in order so the print X to X pages doesn't work for me. Any way to do that without having to send the pages for printing individually?
View 4 Replies View RelatedI download label template 8160 from Avery and try to save the word template Avery downloads in Pages. I have not been able to do this.
View 2 Replies View RelatedNot well versed with wirless printing, I have attempted to print a document with my iPhone 4 to my Brother Printer. The printer is confirgured for wireless printing with my iMac, and prints documents just fine with my iMac. I am not sure if I need an app to print with the iPhone 4, or my iPad 2, for that fact.
Info:
iPhone 4, iOS 5.1.1
In Yosemite, using Preview, I can't print anymore two pages of a PDF document on one paper, for example pages 1 AND 2 on the same page. It prints the same page (1) twice!
View 3 Replies View RelatedWhenever I print a mailing envelope in Lion's Address Book, it prints fine but then prints a blank page following. How can I stop this?
Info:
iMac, Mac OS X (10.7.3), Address Book
When I'm in printing and want to print a specific page after viewing in Preview, is there a way to select from within Preview that certain page, or range of pages to print?
View 3 Replies View RelatedI'm trying to print a PDF in landscape format with 2 pages per sheet. Which I can do no problem in the print settings of Preview. The problem is controlling which order the sheets print in. As far as I can see, none of the print options actually change anything. I can change the order, select reverse layout, etc etc, and it always prints out the same, incorrect way. What am I doing wrong?
View 1 Replies View RelatedI have a MacBook Pro, operating system Maverick 10.9.3 and cannot print a Pages template form in color on my HP 8600 printer. The border of the document is in color, but prints grey. Is there a glitch between Pages and Maverick, Pages and the printer or what?
Info:
MacBook Pro (13-inch Mid 2010), OS X Mavericks (10.9.3), Pages won't print in color
When I open pdf files (opened directly from web or saved on my macbook pro) the pages are always blank in Preview. However, table-outlines are shown.
View 2 Replies View RelatedSuddenly (as of this AM) my iTunes App Store pages are blank. Never had this problem before. [I'm running a MBA under 10.7.3, with latest iTunes (10.5.3).] Symptoms: The Home Page is completely blank except for right panels (Quick Links, Top Charts) and iTunes Store footer; all other tabs on top do the same, except for App Store page, which is completely blank.Connection to Store is fine--iPhone syncs w/o a problem, and I can see my apps, music, updates, etc., can even access my Wish List.Updates download w/o problems, but if I try to view page for an app, only the top part of the page loads, down to "What's New in version xxx". Everything below is blank--no views of app, no Reviews, etc.Category pages will load, but without any Thumbnails, only text, but Purchase buttons work.My iPhone connects and appears as it should--no problems at all.
What I've Tried:reloading iTunes page--several times--no help.Reopening iTunes--several times--no help.Rebooting Mac--dittoRemoving iTunes.rsrc from iTunes [Package Contents/Resources] folder--relaunching iTunes-->didn't help, made it worse-->put it back...same issueOn iPhone:App Store seems to work fine.
Info:
MacBook Air, Mac OS X (10.7.3), 13", 256 GB, 1.7 Core i5; Time Mach
Since the latest update i can't load any pages in safari. The apple start page only loads a shortened version of the main page and then if i click on anything else nothing shows up. When i go to different websites i can see the title at the top of the page and sometimes the page even flashes to what the content is before going blank or green or whatever the background color that site has set. If i go to preferences and uncheck "enable javascript" i can get pages to load but its almost useless as i can't do much without it enabled, such as use my gmail, etc. Any ideas what could be causing this? I've run the flashback tool and that virus is not found. I've removed all extensions and reset cookies, reset safari and still nothing. If i use firefox i have no issues whatsoever so i'm not sure why safari is having issues.
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.3)