I was on the computer when it froze on me then the lines popped up and the computer asked me to restart. When I did that, it just freezes on the start up screen now with the lines across it and will do nothing else.
Info:
MacBook Pro (15-inch Early 2008)
My almost 3 year old MBP shows a full screen of artifacts like horizontal lines with blue and pink boxes. It did it while simply browsing the web. It had a message in the center of the screen that said to push the power button to power off in several languages.
I powered off the computer. Tried to restart it and on the start up screen the Apple appears in the center of the screen with the same pink and blue boxes in it and the spinning symbol below is stuck and the computer will not start up.
Any ideas on what my problem is? I have about 2 months of Apple Care left.
I am trying to get my MacBook LCD to work right. It happened because one time I was carefully wiping my MacBook screen with a little hand sanitizer and a paper towel. However, later my screen started to show a-lot of weird lines and eventually blue, pink and green tiny vertical lines but it is not completely renderd useless, it is just plain annoying and whenever I have an open window on the screen for a long time and I move it around eventually, it shows an imprint in the background into the screen and even when I restart, shutdown or use Windows in BootCamp it just shows up.
Info:
MacBook (13-inch Mid 2010), Mac OS X (10.7.3), Serial number: IQ0351EYF5W
I have a 15 inch early 2008 MBP that the screen will not turn on. When i power on, the hard drive makes a sound that its turning on, but then nothing happens, there is just a black screen. The indication light is on, but again, nothing on the screen. I have tried pulling out the battery, resetting everything i can reset, but still nothing.
View 1 Replies View RelatedI emptied my cache on Safari and my computer stayed frozen for a few minutes. I decided to re-boot, but every time I do so, it goes from the gray Apple screen to a blue screen and stops right there. I don't get the spinning wheel, but rather the black arrow that I can move about the blue screen, but nothing else.
Here's what I've tried with no success.
1. Re-booting via Safe Mode (Command-Shift). Instead of freezing on the blue screen, it asks for my password and after a few seconds it stops on the Snow Leopard Pink/Black Stars background. Same result, only the background is different
2. Resetting PRAM - No luck
3. Re-booting with the Snow Leopard DVD and using Disk Utility. I follow the necessary steps online. No luck
I left my laptop on in my room while I went to the bathroom, and when I came out, I saw the message that told me I must restart the computer. The message froze the computer, so I shut it off by holding the power button and tried to turn it back on again, but it only boots to a black screen. I don't hear the loud hard drive noise, but I hear the fans. Without AC power but with the charged battery, the computer shuts down after a few seconds. The light on the button that opens the lid is dim-to-none when the lid is open and bright when the lid is closed.
I tried many troubleshooting methods discussed on this site, like removing and reseating the RAM and draining the battery, along with the things that the Apple website suggested, like resetting the SMC and PRAM, but nothing works.
I brought the computer into an Apple Store, and after the NVIDIA test was negative, the technician told me that the problem is most likely the logic board. I also took the computer into an Apple Authorized Service Provider, and the technician there said it could be the logic board, hard drive, or boot connector. He also said that there is a very slight chance that the graphics card could have caused the logic board to fail. He tried my computer with another battery and concluded that it's not the battery's fault.
The Apple Store is charging me about $330 for a flat-rate repair. Should I troubleshoot further using suggestions you may have or pay Apple for repairs? If I decide to have Apple repair my laptop, do I need to take it back into the store to pay the repair charges, or can I do it over the phone and mail the computer to Apple?
My MacBook air won't reboot...just has blue screen with apple and circle. Someone said control R which I did then it offered me options. try the other options as I have all of my work on this computer and am afraid of loosing it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I have a problem: when I restart my Early 2008 MacBook Pro there is no "chime" and the screen remains black. The keyboard doesn't light up or respond to any input, and worse still, the "lid button" light on the front of the notebook remains illuminated, it doesn't blink, it just stays on, shining in my face. I loaded a CD into the optical drive to see if I could use the keyboard to eject it, but this test failed. Now, when I turn on my MBP, I hear the optical drive spinning and the quiet whirr of the fan inside.
I looked on Apple's support website about what to do when a Mac refuses to boot. I tried all of the methods they listed, but since my Mac doesn't respond to keyboard input, all of the techniques failed. Having exhausted everything I could think of, I decided to post here hoping someone could suggest something. I was just on the verge of completing my portfolio website and I would like to salvage my data at least.
Well I finally got the drivers off of the MBA install DVD (URL). Just dumped them on to a USB stick. I installed XP Pro again using bootcamp assistant without a hitch. Rebooted into XP, put the USB stick in and ran the setup.exe off of it. XP blue screened when installing Broadcam drivers it appears.
View 10 Replies View RelatedOne minute my computer was fine, the next it froze. I did a hard reboot and now it won't boot past the blue screen, but I can move my mouse. Any idea what to do?
View 8 Replies View RelatedI was using my Mac (Macbook Pro 15" screen) and tried opening a file in GarageBand, at which point a warning message came up saying something about a midi file and something not being allowed, and then froze, resulting in me having to switch the computer off from the power button and restarting (Sadly I didnt realise that this would be the start of a whole host of problems and didnt make a note of the warning message). After rebooting I got the 'stuck on the blue screen with the Apple logo and infinitly spinning wheel' problem that i've seen in a few posts. having tried numerous suggestions posted with no change I ended up taking it to the genius section of an Apple store. When i got it back they said that it may have been a corrupted file, and that they re-installed and reset the starting programs (Something along those lines, I cant quite remember). I can now get onto the computer and use it, though some new problems have arisen.......
View 1 Replies View RelatedI have a Early 2008 Mac Pro running Lion. Its been running well but then last night it froze while I was on the internet. Pretty rare that this happens so I held the power off button and turned it off. Turned it back on and it made the chime noise, apple logo came up, a grey spinning wheel came up for about 30 seconds and then it stopped spinning and the computer froze there.
I tried a bunch of different things. I tried rebooting in safe mode, Recovery mode, From time machine external hard drive, Tried booting in the Windows partition that I have (its on the same as the boot drive I'm trying to boot in Lion off of).
Info:
Mac Pro, Mac OS X (10.6.1), Mac Pro Dual 2.8 GHz Quad Core Processors, 2 GB Ram, NVIDIA GeFo
i was using my (late 2008) macbook 2.0Ghz when i noticed a vertical Blue Line going across the screen from the top to the bottom. I have uploaded pictures for you guys to see below.MY APPLECARE HAS ENDED!Can someone explain if this is something wrong with the LCD screen itself or the video card or the connector is loose?And if its a software or hardware problem, how to solve it by software? i have quoted asolution. But can someone verify if it works?
View 11 Replies View RelatedIs there really a "Late 2008" model? If so, what is the difference.I ask because I recently got a MacPro and according to Apple's hardware test, it is an Early 2008.
View 5 Replies View RelatedI Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I plugged a usb cord (prom an Epson printer) into my 2008 Mac Pro, next thing I know everything is frozen. Turn off the Mac Pro now I can't get it to turn back on.I've unplugged it from electricity and retried, I've taken off the two exterior hard drives that were connected via firewire and the usb printer, nothing seems to be bringing this computer back to life.The computer was working completely fine a half an hour ago.
Info:
mac pro 2.8 2008, Mac OS X (10.6.4)
Running a 2.4ghz Intel Core 2 Duo and currently 2gb 667 MHz DDR2 SDRAM. It has 2 slots, whats the max I can put in? What type of RAM do I purchase and who has the best Price on same.
Info:
Mac Pro, Mac OS X (10.7.3)
My system currenlty has 2GB.
Info:
MacBook
Pro, Mac
OS X (10.5)
i need to buy a new battery for my MacBook Pro, just wondering if anyone has any experiences of longer lasting batteries?also anyone know any trusted places to buy from that are cheaper than the 99 charge by apple?
View 18 Replies View RelatedMy 2008 aluminum MBP 15" is not letting the express card stay in. It won't stay and after search for answers to questions, want to open it and check out the express slot for myself. Done quite a bit of my own work before(Like replacing memory slots), but like to know what something is going to look like before going in.
View 2 Replies View RelatedMy superdrive does not burn DVD's regardless of media or application. It fails every time. It reads but doesn't write. Firmware is up to date. I've used Toast, iDVD and Disk Utility. No luck. My AppleCare has expired so looking for an external DVD drive. Will the MacBook Air Superdrive work on my old MacBook Pro running 10.7.3?
Info:
MacBook Pro, Mac OS X (10.7.3), iPhone 4, Adobe Suite, Epson
I tried to update my Early 2008 white MacBook from OS X 10.5.8 to OS X 10.6. It seemed to be running well. It restarted and went to the white apple screen with the spinning wheel. I let it go for about two hours and nothing happened.
Info:
iPhone 4S, iOS 5.0.1
Where is the HDMI port on Macbook Pro early 2008
Info:
MacBook Pro
My gf is using a white macbook 13'' early 2008 with the following specs:
2.4ghz intel core 2 duo
4gb ddr2 ram (667mhz)
WD 500GB 5400rpm
Mac OS X 10.6.8 Snow Leopard
switched on her macbook and then typed in her password (no caps and caps are not switched on either) and then hit login and then screen turn light blue for a few seconds and then i'm back at the login box again. Typed in password again, the same thing happened i tried resetting the passowrd through the installation disk of snow leopard(she only has 1 hardisk with her account, no partitions).And then it gave me a dialog box saying:Password Saved?The password you entered has been saved for the user xxxx. Resetting a user's password does not change the password for the user's login keychain so it will not be unlocked automatically.
Use Keychain Access to reset the password for the user's login keychain I have no idea what's the Keychain Access since i can't even get pass the login box. So i just click ok, restart the macbook and then entered the new password. And the same thing happened. Should i restore frm my TimeMachine or do a Repair Disk?
A few months back, my old reliable MacBook Pro (early 2008) started behaving oddly. Have no idea why, but went to start it up one day, and it took forever to start up and get me to the login screen. Been like that ever since. Occassionally, when I finally get to the login screen, the keyboard will not function. After a few minutes though, it always works. This only happens about 5% of the time. Once I log in, everything about the computer from a performance perspective seems to be pretty normal In addition to the slow start up, however, system gets extremely hot at the top of the keyboard, near the monitor. Fans run fast almost all the time when the system is powered on, and often when it is 'asleep'. CPU Temp goes to about 170, and the fans are always between 2400 and 3500.
I took it to Apple a while back, and based on the incredibly slow start up time they believed it was a disk issue. I went ahead and purchased a 500GB internal drive and this past weekend used SuperDuper to copy the original boot disk. All went well and I now have a new internal disk. At the same time, I upgrade the RAM from 2GB to 4GB.
After all that, the system is still very slow at startup and runs as hot as it did before. I will say, it does seem to be slightly faster on the startup, but not what I had become accustomed to for the first 4 years of use. I looked at the activity monitor and don't see any processes hogging resources. No anti-virus software running.Currently running Mac OSX 10.6.8 My battery is pretty muc shot, but I never really use the system unplugged.
Info:
MacBook Pro, Mac OS X (10.6.8), Upgraded disk and memory
I tried restarting my MacBook (2.4GHz, 2GB RAM, 250GB HDD, early 2008 model) today. But when it turned back on it would just shut off and automatically try restarting. It did this over and over again until I just pulled the battery so it would stop. It wouldn't even let me do a force turn off. It would just start up, shut down, start up, shut down over and over again.
View 2 Replies View RelatedMy trackpad/computer sometimes just freezes out of the blue.. I move my cursor around click.. and sometimes just freezes and i either have to put it to sleep by putting down the lid.. and reopen it or hold the power to reset. or just start pressing random buttons and after about a few minutes or so.. it'll start working again..
View 2 Replies View Relatedopen the kext (Show Package Contents), then go to Contents, then open Info.plist (I usually open it in Property List Editor that comes with Xcode Tools (comes on the OS X Install discs). If it opens in Property List Editor, then do the following:
Go to IOKitPersonalities and open it On all the sections begining with WSTrackpad*3 (like WSTrackpadISO3) scroll down until you get "TrackpadThreeFingerDrag". Copy that line (it should have a tick next to it).
How do I make a recording to test if my early 2008 MBP mic is working?
View 2 Replies View RelatedDoes Apple provide replacement batteries for out of warranty early 2008 Macbooks? Just wondering as my old MacBook is giving a "replace soon" or similar message under the battery status also would it be worth the cost to replace it considering its age?
Info:
MacBook, Mac OS X (10.7.3), White plastic early 2008 model
