MacBook Air :: Adding MBA To Wireless Airport Express As A Second Computer?
Jan 26, 2009
I have a problem I've been working on for over an hour.
I have a uni MBP that has wireless internet and printing through an airport express (just internet and printing, not using Airtunes feature).
I bought a MBA last night and am trying to get it to work as well. It works just fine as far as wireless internet, but the wireless printing simply will not work. I have the printer listed in my MBA and all airport express utility settings seem to be A-OK, it just will not print wirelessly from the MBA. The printer queue just gives me the old Error 300: The printer does not respond.
View 2 Replies
ADVERTISEMENT
Jun 5, 2006
I have a PC (running XP Pro) that accesses the internet through a wired router (D-Link) hooked to a cable modem. My boyfriend just moved in with his iBook and Airport Express. I hooked the Airport Express to a LAN port on the wired router, and it basically works fine. He is able to access the internet wirelessly without any trouble. I also connected the printer to Airport Express and he is able to print wirelessly. However, I thought I was going to be able to also print to the printer because following info from Airport FAQ.
FROM AIRPORT EXPRESS FAQ:
Question: AirPort Express connects via wire to my third-party router, and I have plugged a compatible USB printer into AirPort Express. Will it share the printer with my non-Apple computers, too?
Answer: AirPort Express acts as a print server for any Mac OS X 10.2 or later, Windows 2000, or Windows XP computer that is on the same subnet, regardless of whether the third-party router is wired or wireless.
Can anyone comment on this? How can I make this feature work from my wired computer? Is there something I need to do to make them on the same subnet? Also, if there IS a way to print via Airport Express, is there a way for me to access airTunes too?
I did read a somewhat similar situation and this is what was advised. "Manually give it an IP address and subnet in airport admin (under the internet tab). For example if your router IP address is 192.168.x.1 with a subnet of 255.255.255.0 give your Airport Express 192.168.x.2 255.255.255.0. i.e. give your Airport Express 1 IP number higher than your router. Also make sure you are not distrupting IP address from your Airport Express, and you are creating a wifi not joining."
View 7 Replies
View Related
May 14, 2009
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
View 3 Replies
View Related
Oct 2, 2008
I am trying to add an Airport Express to my existing wireless network, in order to increase the range of the network.
I've run Airport Utility and gone through the setup wizard - everything seems to have gone of fine, it says "Settings for this Airport Express have been successfully updated" and then it goes into "Waiting for the Airport Express to restart..."
But that restart doesnt happen - or rather, I get the message "Unable to find the Airport Express base station" (words to that effect). And after this, I can no longer find that new Airport Express on the wifi network.
So I reset the base station and tried a manual setup. Same problem - settings updated, Airport Express doesnt restart properly and can no longer be found on the network.
Any ideas what is going on here? I tried it using Mac Mini running 10.5.3 and Airport Utility 5.3.1.
Edit - I just tried this doing this on my Macbook running 10.5.4 and Airport Utility 5.3.2 - same problem.
View 5 Replies
View Related
Feb 10, 2009
I am finally jumping on the WiFi bandwagon at home - I know my macs pretty well but need advice at this wireless stuff...
1) I currently have a broadband modem that came with my BT broadband account - am I right I do not need to change this - just add an airport extreme/express to it?
2) What should I be considering when I am choosing between express/extreme? is extreme just longer range? I live in a 2 bed flat on 1 floor..
3) I would like to add some storage to this airport so I can store my itunes music on it and have it accessible to my laptop when I come in the house with it - I see airport extreme has a usb port - but is this USB2? if only usb1 then that would be very slow - what's the best way of adding wireless network storage (something like a firewire/usb2 drive like the drobo) to my wireless network?
4) - I am thinking about getting an apple tv - does extreme/express decision make any difference in this regard?
5) - If I want to run itunes through my main stereo - do I need to get a separate airport express for that? (Stereo and broadband modem are in different rooms in the flat) and does my laptop then work as itunes server, sending music from the storage attached to the airport extreme, to the express attached to the stereo?
6) - I see many people use a mac mini in systems like this - what are the advantages of having a separate mac mini added to the system to act as a media server as opposed to just using my laptop?
7) - If am am attaching media storage to a WiFi network - how do I make sure it is secure?
View 11 Replies
View Related
Oct 1, 2009
I added an airport express to my network tonight. The network is wep128 secured which did not show up at first on the express. After I added this, I started to be able to play itunes to my stereo and every once in a while it would drop out. I notice, my network was dropping on my computer. I can manually reconnect, but even then it show disconnected by work with itune and my stereo and even works for sending this note. It will drop again soon.
sometime, i need to reenter my wep assword into my laptop and once it actually seemed to erase my passowrd and said the key would be found automatically
I did not setup a bridge, did not setup static ip addresses, my express and my network have the same passord to access them. just trying to think of other deatails.
View 2 Replies
View Related
Nov 27, 2009
So I just got a new airport extreme and express (both draft n) with the hopes of redoing the wifi in my house. We previously had two modems on either side of the house and separate networks coming off them and I wanted to get rid of one of the modems and just extend the wifi from the other one.
So I set up the Extreme as the main base on the far side of the house and set up the Express to extend. If I stand in the kitchen with the Express off and am just running off the Extreme, the performance is good. But adding the express, even in the kitchen itself, suddenly drops the performance of the network to an unusable speed. Why? I've been moving it around all day: closer to the Extreme, farther from the Extreme. Nothing seems to hit it. Granted the kitchen is an annoying room with lots of metal and phones and interference, but I simply don't understand why adding the Express should mean a *decrease* in speeds.
Also, interstingly, this seems to mostly affect the download speeds and upload will stay about the same. Not sure why that happens.
My ultimate goal is to be able to add another express (one that I had, with b/g) to the network so that I can get internet to a Slingbox in the bedroom.
View 1 Replies
View Related
Oct 26, 2010
I just bought an Airport Express (Version: 6.3) And i tried installing it via the airport utility with no success. After several tries i got the Airport Express to install successfully but the blinking light on the Airport Express was flashing yellow. I know it was working because i was able to stream music via itunes to my Sound System. Everything was working fine, even though light was still blinking. I restarted my system and now it wont read my Airport Express?I also have a Airport Extreme Station (for wireless HD purposes) which i installed myself and have had no problems with, so i know im doing this right...But i just cant get this express station to work
View 1 Replies
View Related
Dec 27, 2010
Can an airport express be used to add wireless to a PC with the ethernet cable? I have an existing wireless network and I want to use the airport express rather than a usb adapter to add wireless to my PC to join the network, is this possible?
View 2 Replies
View Related
Apr 20, 2009
I really like my wireless desktop but want to have access to either my self powered Toshiba HD or the Western Digital 500GB MyBook. I don't want to give up wireless printing but only have one USB port to work with. Can I use a powered USB hub to act as a port multiplier and access both my printer and HD?
View 3 Replies
View Related
Oct 21, 2006
I just got a 17" Powerbook G4 1.5 Ghz. My friend that sold it to me said that her wireless always had a really weak signal but in recent time, unless she was in the same room as the router it was really hard to get a decent connection. She said she took it to an Apple store but her Apple care was expired and they said they'd have to send it out for 5-7 days. Today I just tried it out at home, where I normally (as well as everyone else in the house) have full signal from our router, this computer gets a bar or two max.
I was adding in some more RAM to it so I figured I'd take it the rest of the way apart. So, in doing so carefully because I could not find a diagram at all that matched this computer, I found that there is not a Airport Extreme card in the computer at all. Is that right? Is the wireless built in now? (or maybe for that year). Is this a common problem that the signal fades?
View 2 Replies
View Related
May 14, 2009
I have a few questions about using a airport express as a wireless bridge to my tv room.
1. I want to use my airport express as a wireless bridge with my att 2wire router. Would there be any issues or would that work
2. I need to have 3 Ethernet ports but the airport has one would i be able to hook up the airport express to a switch to get the extra 2 ports.
3. Would I be able to do the wireless bridge and stream music at the same time.
The att 2wire is the modem the airport would be the bridge in the tv room and would be hooked up to a xbox 360, Slingbox Pro HD, and a directv HD DVR.
View 9 Replies
View Related
May 31, 2009
install Wireless Airport Express, I have some experience on this matter but with the Airport I QUIT
View 3 Replies
View Related
Jul 3, 2009
I currently have a cannon MP620 all in one printer, I mainly use this for my PC notebook. If I were to purchase an Airport Express how would I go about printing wirelessly? Would I need to instal any drivers from the printer since it would be a network printer? I'm pretty confused as to how wireless printing works with the Airport Express.
View 4 Replies
View Related
Jul 8, 2009
I am thinking about buying an airport express to extend the wireless coverage in my house.
I have a wireless router, however the signal does not quite reach the other side of the house. At the moment I use some network over mains equipment, like [URL], to connect a desktop up at the other side of the house.
I was wondering if I will be able to connect an airport express up to one of these power line adapters and use it in conjunction with the other wireless.
View 2 Replies
View Related
Aug 13, 2009
I've recently acquired an old HP LaserJet 6P printer. I've successfully connected it to my MacBook (10.5.8) using a Parallel-USB Converter Cable and Gimp-Print drivers - it doesn't have a built-in USB port. What I'd like to do now is connect the LaserJet to my Airport Express to allow me to print wirelessly. Has anyone done something similar to this before? Has it worked? I'd like to get advice first so I don't end up wasting hours and banging my head off a wall trying to get this to work.
View 1 Replies
View Related
Oct 3, 2010
I'm having a hard time deciding what router to buy. I like the extreme router but it's a bit pricy. Im using comcast 12mpbs per second speeds. Would the apple airport express be good enough for streaming videos and movies? There will be three laptop users. At most, two at any given time I think.
Would the express be good enough or do I have to get the extreme to stream video and movies? (YouTube, age of empires gaming, apple tv, netflix)
View 7 Replies
View Related
Oct 17, 2010
I've moved out to the middle of nowhere, and there's no phone line. However i do have a very fast 3G/HSDPA wireless router on the 'Three' network, and have been impressed by its speed - i was downloading at 285kb/sec just now! Only issue is that there's a 15gb/month limit on data, but it's the most i could get.
Anyway, it's not a USB dongle, it's actually a tiny wireless router and more than 1 person can be connected with no problems. It's a Huawei E585 Wireless Modem.Thing is, I still want to use my Airport Express (802.11n) to stream from different machines to my hifi.How should i go about this? If i connect the Airport Express to the 'Three' router (which is b/g speed) and use that normally, would it work properly do you think? Does anyone have a set up like this, or has tried it
I don't have my Airport Express with me as it's with a friend, so can't just go and try it myself. Obviously don't want to have to put a computer onto a different network to be able to use 'Airtunes'.
View 6 Replies
View Related
Feb 1, 2007
Has ANYONE had the following problem: Original titanium PowerBook G4, fully up-to-date AirPort software and Mac OS X 10.4.8, which will not communicate with a new AirPort Express wireless router in WPA Personal (neither WPA nor WPA2), but which WILL communicate quite happily with any wireless router, anywhere, including aforementioned nice new AirPort, in WEP? Access control is NOT active.
View 1 Replies
View Related
Mar 12, 2009
I live in a small apartment, so I never set up a wireless network, because, well I don't need to. However, lately I've been interested in trying some things out with my iphone to see how they work (the remote application mainly), but don't really have the money or need to go out and buy a wireless router. I was curious if there was any way to use my Airport Express Station as a wireless router? Someone told me it was possible, but after much googling, I didn't find much.
View 5 Replies
View Related
May 23, 2009
setting up my xbox 360 with a xbox-live connection. I am planning on relaying my base station's internet connection to my express. Then connecting my express to my xbox via ethernet. if someone could inform me on the settings, for the xbox, extreme base station, and express.
View 2 Replies
View Related
Aug 21, 2009
So I just bought a new revision Airport Express, so from reading I've learned that the AE can act as a bridge/wireless extender for my AEBS (dual-band), my question is, can it only do either N-5ghz or G2.4ghz, and not both at the same time? Also can anyone give me some ideas on Real Life range I should expect to get with it? If I can in fact only do one band, I'll be doing the G band as N pretty much covers everywhere but G isn't so good at penetrating the walls it seems.
View 5 Replies
View Related
Mar 30, 2010
I am a Windows user at the moment and plan to get a MBP in a few months. I am currently using a D-Link DIR-655 router. My house is a 2 story plus basement, and the D-link pretty much needs to be in the basement. We get excellent wifi reception in much of the house, but it is very spotty on the 2nd floor (an open to the first floor loft) and on the end of the first floor of the house opposite the router.
I like the idea of being able to use AirTunes, so I was thinking of buying an Airport Express as an extender to get usable reception throughout the house. I figure eventually, I may replace the D-Link with an Airport Extreme.
So can I do this wirelessly or do I have to wire the Express to the D-Link? Doing so would involve making holes in things that I don't want to make holes in, so I will put up with a spotty wifi network rather than getting an extender. Our house is a log home with hardwood floors and wood walls and ceilings throughout, so it is not as easy as patching some drywall if we decide to get rid of the wire/hole someday.
I am not a power user, not a gamer and if I want to download huge files, I can do so on the laptop in the basement. I just want a decent wireless connection throughout the house, and would like the ability to stream iTunes.
And if the Airport cannot be a repeater for the D-Link, what about the reverse, with the Airport as the base and the D-Link as the repeater?
View 2 Replies
View Related
Nov 10, 2008
but then it doesn't work. bonjour doesn't scan anything. i've been not wirelessly printing in the past 4 months that i've had this thing [URL]. i have latest windows xp sp3 and i have wifi on/off on my macbook pro. i only use bootcamp.
View 6 Replies
View Related
Jan 1, 2009
A friend of mine has the following situation: In the living room he has a stereo hooked up to a single Airport Express (the only wireless router in the house.) In the sunroom he has an iMac Core 2 Duo running the latest version of Tiger hooked up directly to a DSL modem. Itunes recognizes this Airport express and successfully streams music to it. WiFi devices connect to this network but won't connect to the internet even though internet sharing is activated under the iMac's system preferences. Are there some tweaks in the settings that will make this work or does he absolutely need another Airport Express connected to the DSL modem?
View 4 Replies
View Related
Sep 12, 2010
Question: Can a wireless printer 'join' an Airport Express Network? The printer in question is not near my router, can the printer join the network wirelessly so that I can print w/o a USB connection?
View 4 Replies
View Related
Jan 5, 2011
Just wondering if the Airport express can be used to extend the range of my wireless keyboard and my magic mouse. Trying to use it with my mac mini and tv in the other room.
View 2 Replies
View Related
May 7, 2009
I searched the forums but i couldn't find a specific answer to this question... I'm a kinda/non-tech savy girl who loves tech stuff but needs help sometimes
So I am interested in getting an airport express so I can capture the wireless from my netgear router and then connect my xbox 360 to the ethernet port to use the internet... I would also like to connect my desktop PC to the ethernet port to use the internet because I use my Macbook Pro for internet use. Since my desktop doesn't have a wireless card I won't have to buy an adapter for it if i use the airport express. I also want to use the airport express to connect to my AV receiver.
Basically in my room I have a desktop PC, xbox 360, AV receiver, and a tv. The reason I ask about the requirement to have an airport extreme base station was because it seemed like most of the posts on this topic said you need to enable "Allow this network to be extended" and i don't think my netgear router has this option, but i dont see why it would need it...
In my mind I would expect the airport express to be able to connect to my wireless network after i enter in the password, and then be able to connect my xbox or pc to the ethernet port...
View 2 Replies
View Related
Aug 17, 2009
im off to college in 2 weeks and would like to set up a wireless network in my residence room with my airport express. Its a small room, but i would still like to be able to move from my desk to bed or whatever without wires, and also i would like to be able to hide my printer somewhere. Heres the catch. My residence doesn't allow wireless networks for some reason. I know i can make my network hidden. But will that be enough to keep them from finding out? I imagine every now and then they might just scan for networks to see whats out there. But if mines hidden, i shouldnt have a problem, correct? Just want to make sure. Not sure what the consequences are, but im sure they would just ask to shut it down.
View 21 Replies
View Related
May 27, 2009
I live in a fairly large house, and we have two airport devices. There is a time capsule on the second floor of one corner, and an airport extreme on the second floor of the other corner. The reason why they are in the corners is that the time capsule plugs into the cable modem / iMac directlly, and both of those are in one corner. As for the airport extreme, it also shares a wired connection with a tivo and a slingbox so it needs to stay where it is. I've had some slow connection issues, and I think the basic issue is distance / walls. If I turn off the Airport Extreme, I get a VERY weak signal in that corner of the house. Turning the Airport Extreme back on, I get a great WiFi signal, but the connection between the two base stations is pretty weak, so internet speeds can be mediocre at times. It occurred to me that there are two ways to fix the issue...
1) Install a 3rd party antenna on my Time Capsule. Some hacking will be required, which I am fine with doing.
2) Putting an Airport Express in between the two base stations.
I'm curious to hear some opinions on the two options. Option 1 will keep me from installing new hardware in the house, but how well do the external antennas work? Option 2 will be an easy solution, but will it work well? How much latency is added? Curious to hear more feedback from those using a network of Airport base stations in a large home.
View 4 Replies
View Related
