Mac Mini :: Upgrade Path - Install Vista / Fusion?
Dec 29, 2008
I would appreciate some advice on an upgrade path for my Mac Mini. I have a 1.83GHz Mini with 80gb hard drive and 1GB memory. I'm using it for a HTPC and it has worked out well for this purpose. I recently tried to install Vista/Fusion on the Mini and found it to be so slow as to be unusable. Having used Vista and Fusion on my 2.2Ghz MBP with 4GB memory, I guess the memory is what is causing the problem since on MBP it works well. I have 2GB (2 x 1GB) of memory that I pulled from the MBP which I figured I would put into the Mini when I finally got the nerve to attempt an upgrade. Is 2GB enough to run Vista with Fusion? Its free so I would prefer to use it instead of spending about $45 for 4GB of new memory. Since I will be opening the Mini I was going to change the hard drive. With my HTPC setup I have about 2TB of external storage and just wanted to put in a larger and possibly faster drive in the Mini while I do the upgrade. Would you recommend going to 7200rpm or just stick with 5400rpm? Is heat an issue with these drive that would cause the Mini's fan to run more often? I was looking at a WD 250GB 7200rpm drive. Another other recommendations are appreciated.
View 24 Replies
ADVERTISEMENT
Dec 9, 2009
I had a first generation intel imac 2.0 core duo (not core 2 duo) since 2006. Well now I am in the market for a new imac but I'm trying to figure out whether I should go with the C2D or i5/i7.
I use my imac for audio recording and it has served me well. Although its age is showing which is causing me to find new creative ways to stretch its CPU power, I wonder if a 3.06 GHz is a good enough boost (from my current 2.0 Ghz).
View 14 Replies
View Related
Dec 29, 2009
What connection type would you choose when buying a new external hard drive?USB 2 isn't very fast, but Apple seems to be de-emphasizing Firewire and eSATA isn't even an option on anything except the Mac Pros AFAICT.
View 6 Replies
View Related
Oct 10, 2009
Is there a way to use my bootcamp vista through vmware fusion or another similar virtual machine app?
View 1 Replies
View Related
Dec 15, 2008
I have an Airport Extreme network with an XBox 360 hooked up to it via ethernet. I would like to be able to use the XBox 360 as a media extender using the Windows Media Center running in Vista on my MacBook Pro. Vista Ultimate is running under VMware's Fusion and not as a bootcamp partition (not sure if this matters, but thought I'd mention it just in case). The MacBook Pro is using Wi-Fi (N) to connect to the Airport Extreme.
I followed the directions on the [URL] page, and all four things below that are required to be checked (given permission to run) or running as directed, yet I still get the message stating the Xbox could not be found. UPNP is indeed running.
What am I missing? Do I have to open ports on the Airport Extreme, even if the computer and xbox are on the same network? Do I have to open anything on the MacBook Pro on the Mac OS side?
View 4 Replies
View Related
May 14, 2010
I want to upgrade my wife's Mac Mini (2007, 1.66 GHz Core Duo, model T2300) with a new HDD. I've done that a couple years back, but times were less complicated. Here are my questions:
1) I hope a 7200 rpm drive will improve performance, without generating more noise than a 5400 rpm drive. Is that a correct assumption and would you recommend that?
2) Looks like many of the 500 GB 7200 rpm drives are SATA II. Will that be compatible with the plugs in the machine? Will I have to set any kind of jumper pins (I've never done that, though)? 3) My plan is to naturally do a time machine back up of the current drive to use it to build the new one. However, I still need to install Mac OS X Snow Leopard. The Mac mini came with a Tiger install disc. How do I get to SL with the least trouble? Do I need to start with the original Tiger disc, then use the Leopard disc and finally upgrade with the SL disc or can I use the SL disc right away?
View 5 Replies
View Related
Jan 6, 2010
I am trying to install Wireshark. The directions say to open a Finder window and navigate to /usr/local/bin. I cannot find where this is in Finder. Can someone provide me a detailed path how I can find this folder to copy Wireshark files?
View 5 Replies
View Related
Apr 10, 2009
I searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies
View Related
Sep 5, 2010
My Mac mini 2010 model with 60SSD 4GB ram, vmware fusion windows 7 ent. Very choppy and bad performance,
View 2 Replies
View Related
Jan 11, 2009
I'll like to install Mac OS 10.4.6 in VMWare Fusion for stuff that I need to use 10.4 in. How might I do that? I've noticed they support 10.5 and 10.6 server but why not client? and why not 10.4 intel?
I have the install disks with me, if I need to make an iso or cdr of it, I know how.
View 1 Replies
View Related
May 11, 2009
I have currently XP installed in Boot Camp and I have Vmware fusion installed in OSX. I can boot my XP partition via vmware fusion. Now the question is, when I boot the XP via vmware, I can boot from a Win 7 DVD and the installation starts. Can I just go on an install it in this way? The thing is that I'm not at home and only have a VNC session to my mac, so I can't install it in the classic way which requires a reboot
View 2 Replies
View Related
Jul 10, 2009
is there a way to install windows 7 rc on VMWare Fusion without burning the iso to DVD? perhaps using a USB drive?
View 3 Replies
View Related
May 10, 2009
i am gonna install VM fusion on my macbook air and the problem is that i left my window xp cd installation at my friends house. Can i install iso image or something like that so that i can ask him to convert it and then send to me via internet so that i can use the image file to install VM fusion. Btw, he and i, not sure how to convert it. anyone knows?
View 2 Replies
View Related
Dec 20, 2007
I'm very shocked about what happened today. I convinced my friend to get a macbook pro since he could run windows and mac (and at the same time through vmware fusion) so he went out and got a 17" macbook pro (don't post about how he should have waited for the January update cause already told him and he didn't care). Well he bought a vista upgrade installation dvd through the university of texas and it worked fine with bootcamp.
He purchased it for $34 and had no previous version of xp or any other version of windows for that matter and the upgrade dvd worked fine with the boot camp installation. Is the upgrade version he got through ut different than the standard retail vista ultimate upgrade dvd? All we did was select clean install of windows operating system as the upgrade selection was grayed out since there was no previous version of windows. Then clicked on advanced, formatted bootcamp created disk, and installed
View 5 Replies
View Related
Jan 17, 2010
Question - how do I get started? I currently have Vista loaded on my BootCamp partition. Do I launch Vista, and run the Windows7 upgrade installation from Windows? Or do I do this from BootCamp?Note that this is an upgrade disc, not a full/initial install version.
View 1 Replies
View Related
Jun 13, 2010
Not sure if I should get vmfusion or parallels to run windows 7 on.
They both seem to be as good so I guess I am shallow enough to go for the best looking.
I will trial both with windows 7.
Can I do that with a single license copy of W7?
BTW I read very thread on ag v glossy and small text problems with hi res and worried for weeks!
As a 63 yr old with glasses for short sightedness (and a short temper) I am delighted with my 15 inch hi-res ag!
View 2 Replies
View Related
Jul 21, 2010
Ok, so I bought a Mac Mini in April of 09 and it has the drivers for XP 32-bit, but are the drivers there for Vista and are the drivers for Windows 7 the same.
I might upgrade from XP on Boot Camp, but it doesn't make sense to goto Vista when 7 is out and the same price.
View 1 Replies
View Related
Jul 30, 2009
I have Windows 7 running on a separate disk on my Mac Pro.
A Bootcamp drive and System Reserved drive mount in OSX.
Fusion fails to preprocess the bootcamp partion... and it fails to start.
Any suggestions on how to get this working?
View 3 Replies
View Related
Mar 18, 2008
Everytime I install windows vista 64-bit via bootcamp and after its done installing and when windows try to boot it shows errors... anyone know how to install vista 64 bit onto the mac pro?
View 9 Replies
View Related
Mar 21, 2008
I have followed the instructions verbatim but after I choose the proper partition and click 'Format' (in the Vista setup), it still tells me "Windows is unable to find a system volume that meets its criteria for installation." Also it says "This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu." I have OS X installed on my 1st hard drive and I am trying to do this install on my 2nd hard drive.
View 24 Replies
View Related
Aug 8, 2006
i am gonna install VM fusion on my macbook air and the problem is that i left my window xp cd installation at my friends house. Can i install iso image or something like that so that i can ask him to convert it and then send to me via internet so that i can use the image file to install VM fusion. Btw, he and i, not sure how to convert it.
View 14 Replies
View Related
Dec 18, 2008
I have a apple mac os x.. For several reasons I would like to install windows vista or xp on this computer.. Is it possible, and what do i have to do?
View 1 Replies
View Related
Nov 22, 2006
I had a bad experience.
I tried to install Alcohol 120% and when it tries to make the fake dvd-drive, Vista crashes and you get the blue screen. It does that everytime I boot Vista with alcohol 120%. It craches on and on again.
Why is that?
View 24 Replies
View Related
Mar 2, 2008
I'll be getting a Mac Pro with SAS drives. I will need to run XP64 or Vista (at least in the short term) for the specific application I intend to use.
Questions:
1. I've heard that it is not possible to install either XP64 or Vista if the SAS RAID card is installed. Is this true?
2. If so, can I forgo using the RAID card and the SAS drive for the main system hard drive and instead use a SATA drive - and still install SAS drives in the other slots so I can still get the throughput and rotational speed benefits of them? (I don't need to RAID them.)
View 2 Replies
View Related
Oct 28, 2008
I sucessfully installed Vista on my New Macbook Pro. I upgraded it from XP. I am trying to do the EXACT same upgrade on my early 08 Mac Pro and am getting an installation Stop at 55%...
View 4 Replies
View Related
May 31, 2009
Is it possible to install Windows on its own hard drive or with Boot Camp are we forced to install it on a partition on the startup OS X disk? I tried to install it on an empty 250GB HD with Boot Camp, but when the system restarted to install Windows, it asked me to choose a CD ROM and gave me the option of 1 or 2. When I pressed either 1 or 2 nothing happens. It remains stuck on that prompt. By the way, I only have 1 CD/DVD ROM drive in my MacPro.
View 5 Replies
View Related
Jun 27, 2009
I'm planning on installing bootcamp with vista. I've got 4GB of ram on a new MBP. Should I go with the vista home premium upgrade? Or do I need the full version and not the upgrade disc?
View 5 Replies
View Related
Aug 14, 2009
When i try to install windows vista through parallels it cancels the download during the expanding files step.
View 1 Replies
View Related
Jul 10, 2008
Since late April, Apple Software update has been popping up to tell me that I should install Bootcamp 2.1. However, every time I tell it to install, it is unsuccessful. I've also tried to download the "BCUpdateVista32" Installer myself, but that has not worked. I've even tried going to the command prompt to install from there, but nope. When I try to install the Bootcamp update, I get the following message:
"The installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click Finish to exit the installer.
This is extremely frustrating! What should I do?
View 1 Replies
View Related
Aug 13, 2008
I want to install vista on my macbook air so i can dual boot, how do i do that?
View 2 Replies
View Related
