I've got an odd issue with my finally arrived Mac Pro where the Wireless works flawlessly in OS X but almost not at all in Windows 7 Ultimate x64.
My first real experience with bootcamp, but I put on all the windows updates and did the bootcamp setup. I'm using an older 1TB Time Capsule for Wifi and it connects with pretty good strength over the standard and the 5ghz channel and shows around 200 Mb/sec speed. It seems to be able to resolve hosts but can't ping them. IE and Firefox go nowhere. Again once I boot into OS X it is all peaches and cream.
I have a Macbook, running XP Pro on via Bootcamp. It is connected to a wireless network. I want to print from XP bootcamp, wirelessly, to printers connected to a different computer (XP).
I have a PC that has 2 printers connected to it, running XP Home. Both printers are SHARED, with NAMES.
My 2 other computers (both PC's), can print to these printers wirelessly. I, cannot. I have installed all the drivers for the printers (using their CDs) on Bootcamp XP. I tried connecting to the printers, but I can't.
I have a Unibody Macbook Pro, and I recently reinstalled Windows XP SP2 (updated to SP3) with Bootcamp. I am unable to see any wireless networks when I know several are present. (OSX Connects flawlessly).
I have attempted to update the drivers to no avail.
I currently own a Macbook I purchased in January 2009. A few days ago I installed Boot Camp Agent so I could use it to play certain games I could not run using Parallels. I downloaded Boot Camp following the directions it comes with. (Installed Windows XP Pro, then installed Mac OSX Leopard 10.5). Everything works fine except I cannot figure out how to use the wireless network established in my home.
On the Mac side, I can connect to the internet with the Airport fine, never have a problem on that side. When switched to the Windows side I have no wireless options. Though I can use the internet when using an ethernet cable connected directly to my router (Linksys WRT110). I have read soo many forum posts and nothing I have read has helped so far. When I go to Network Connections and Properties, I do not have a Wireless Network Connection tab.
Will the new, slim, wireless Apple keyboard work fine with Bootcamp running Windows Vista? Will Vista recognize the keyboard eveytime you log in, without having to re-program it everytime? I asked a worker at the Apple Store, and he said it should be fine except the "special controls". What are everyone's experience with the Apple keyboard on bootcamp?
One day I noticed that my Macbook was having trouble find ANY networks available (despite knowing that many were available) - it doesn't see any. Occasionally the Airport will pick up a network or two with extremely low signal strength (even if the wireless router is in the same room) but usually has issues connecting and eventually the network disappears from Airport. At first I thought my Airport had totally crapped out and so I had to go out and spend $100 on a third party USB wifi stick (there are very few companies who make these for Mac, but for PC they can run for $15 ).
Now the crappy design of this USB wifi stick I purchased has caused the USB head to become bent and is ultimately deteriorating. SO, recently I noticed that when I use Bootcamp to run Windows 7 on my Macbook, Win7 is able to fully use my built in Airport hardware and receives great signal - so now I'm thinking that it may not be a hardware problem at all.
He has installed Windows 7 on to his Macbook (to use a program he cant on OSX) and there has been no wireless detected at all, everything else is working this is his only problem.
I installed XP, via BC, on my older 20" iMac, and I keep getting an error message when trying to connect to my wireless network. My network shows that it is available, with full signal strength, but as soon as I try to connect to it, I get an error message saying that it may be out of range, and I should refresh and try to connect again.
Been searching and can't find the answer here. I setup Bootcamp last week and had internet connection and everything working fine. I've setup Parallels now as well and I am connecting to the Bootcamp partition with this via OS X.
So, everything is working well, I can view my local websites on Leopard via Parallels, the only thing that has stopped working is my wireless internet connection in windows.
My only guess is the Bootcamp is now connecting to everything via my OS X connections, but not sure. Does anyone know how to set the wireless internet up again?
I cannot seem to connect to the wireless connection when running bootcamp. It says something like the signal is too weak or whatever, but when I run it on OS X, it works perfectly fine.
I used my Wireless Aluminum Keyboard over in Mac OS. I recently installed Vista 32-bit over bootcamp. After I boot Windows, I cannot use my Wireless keyboard. I paired using Windows help assistant or whatever but still cant use it. Do you guys have any same problems? What do you guys do? Is there any Apple Software update for this problem? I checked Apple support page but no luck!
So, I got the Polycarbonate Macbook , Parallels 5, and Windows 7 Home Premium. I installed windows on bootcamp and had parallels use the partition for windows and I got it all working, all the drivers on Windows are great, except the wifi. It's not even saying I've got a wireless card installed, it won't recognize that I have one in my Mac. But when I use parallels and when I boot it as a regular Mac, it works great. I've looked around and haven't found an answer to this? Anyone found a solution or could help?
I am looking for a wireless keyboard/mouse to replace my current USB wired to fulfill the following requirements:
1) Must Work with OS X, Bootcamp and Parallels. 2) Work with Windows XP (currently) and Windows 7 in future. 3) Whatever wireless technology, I only want ONE receiver for both KB and mouse. 4) bluetooth or NANO or other 5) Keyboard MUST be high contrast (example-black keys/white letters). This precludes current Apple keyboard. 6) Would like NOT to mix and match brands.
i am running awin7 in bootcamp. in this bootcamp i am using outlook 2010. i cannot create an "@" in emails. is there any shortcut to create an @? is there any combination to create the windows "alt gr" on the macbook air keyboard?
I have a Macbook Pro and I had AT&T help me with the settings in OS X so that I can surf the internet with my modem via ethernet. Everything worked fine. Then I installed Windows XP SP3 with Bootcamp and bought a Linksys Wireless N Router. I used the install disk on the PC side to get the router working, assuming that the Mac side would work just fine when it found the network. Now I can connect to the wireless router when I'm in my PC partition, but when I try using my Mac partition. It does not work. (Ethernet works with both) When using other people's wifi connection, I have no problem. Only at my house do I have this connectivity issue.
this is a major problem for me. I just installed ubuntu on my mac via boot camp, and I can't find how to set up wireless internet! Once, after installing windows, the same problem occurred. I'm not sure whether this version doesn't support airport (ubuntu v10.04.1) or I need the snow leopard drivers (but I can't because it's a .exe file).
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
had a bootcamp partition which I eventually ended up removing again with the bootcamp assistant.Now I want to create the bootcamp partition again, and when I start up the assistant, there is a 5gb leftover partition of the old bootcamp it seems. I just can't resize it... I've tried anything as low as resizing it to 10gb to 100gb... both fails.I have more than 200gb free space.I have just run a full defrag with iDefrag I've tried to do fileoptimization with techtool pro v5 I tried using camptune (which only works if you already have a working bootcamp partition, which I dont.
im on a goal to resize my bootcamp partition... im running 10.6.4 with Win7 in Bootcamp... i made a mistake of only making a 80GB partition for windows 7.... now i want to make it bigger, i have read up on a number of methods but most are outdated and users report issues with windows 7 and SL so i'm a lil stuck... this is my idea
I have 120GB unused HDD space atm so could i.. back up my 80GB partition to a DMG with disk utility then delete the old partition making the whole 200GB unallocated space... then use the bootcamp utility to re occupy the space then use disk utilities restore option to restore the image of the 80GB to the new 200GB partition... would this work? if not has anyone got any other methods to use with 10.6.4 SL and Win7?
I have just got my 1Tb time capsule and there are a lot of confusing descriptions of how to connect it.
At the moment I have just selected "join existing wireless network" which is a ADSL 2.4ghz G Router that came with my internet package (Thompson TG585 v7).
Does this mean that all traffic goes via the ADSL Router and that I will not be using the 5ghz band when I back up so that all the data will follow a path like this and have slow data rates? :
MAC --2.4ghz--> ADSL Router --2.4ghz--> TC
or will I be communicating directly with the TC at 5ghz for backups and data transfer and 2.4ghz with the ADSL router for internet like this? :
MAC --5ghz--> TC ADSL Router --2.4ghz--> MAC
If this is not a good setup, what setup would allow me to get the full speed to the time capsule and be connected to the internet.
I'm working in a home/home-office environment right now which was setup by someone else and I've noticed some odd network behavior when moving about the property. Looking at the setup, the relevant portion is: Cable modem - Airport Extreme - 10 port wired switch - 3x Airport Express in different areas of the house. The configuration of each device has the Extreme and all three Express devices set to "create a wireless network" with the network name the same for all four of them. I am not a networking expert but I would have thought that the Extreme should be set to be the "master" in a WDS network and the Express should each be set to participate in that WDS network. If they're all hosting their own wireless network with the same name and the coverage overlaps, how does a PC know which one it's using? Or maybe this doesn't matter. I just know that when we move from one room to another we frequently have to re-select the wireless network to establish connectivity.
I have an airport extreme base station (wireless n draft). problem is, my room is all the way in the back and i get poor reception. Can i just buy another standard $40 wireless G router and "extend" my wireless network? if so, how easy would this be to accomplish? would it be as simple as hooking up the $40 router with my airport extreme using via ethernet cable so that it extends it? update: I am looking at this router...would this accomplish my purpose? [URL:....]
OK, I asked this question previously, but not quite succinct enough, I think. I have a Pioneer home theater receiver that is network capable, but not wireless capable. I want to get this thing on my home network without having to purchase another device as my Mini resides no more than 36" away from it.So far, I have been able to get the receiver to connect to the internet through Internet Sharing on the Mini, but it remains blind to, and invisible to my wireless network. I simply want to connect the receiver to my Mini via ethernet cable and have it see and be seen on my wireless network. url...
Info: Mac mini, Mac OS X (10.7.3), 2.7 GHz i7, 256 GB SSD, 8GB RAM
Bought an OEM version to use with bootcamp. Everything works fine up to the point where it is supposed to let me format the partition that bootcamp created. The XP installation just skips right from when I select the C:yatta-yatta/bootcamp partition and starts installing. So obviously the partition is not bootable... Does anyone know if this is because the OEM version of the OS or something else. I tried to reduce the size of the partition because I read a thread about FAT32 not playing well with disc sizes greater than 32Gb. Still didn't work...
I want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
im kind of new to this and i was trying to get bootcamp to run and also the windows partition that runs on bootcamp through vmware fusion. ive installed and uninstalled like 12 times now in 2 days and its driving me nuts. no matter what i do i cant get it to work. maybe someone on here can give me some tips because im lost.
I have changed both sets of batteries. Turned them off and back on multiple times. Only reason I am able to ask this question is because I'm using my phone. I need my computer back. No I don't have a wired mouse or keyboard laying around. The mouse isn't registering or moving on the screen. The keyboard was working until I tried turning it off and back on. Now nothing is working.
Which would be better, a USB wireless adapter or installing an actual wireless card? The computer is a PowerMac G5 1.6GHz and I want to add wireless capability to it. Which card is the best and which USB adapter is the best. We'll be using a Linksys router.
