installing an SSD in my mac pro 1.01 of 2007 afterrestarting the mac I went out one with a question mark with the famous gray screen, and I do not recognize any system disk.
Info:
Mac Pro, Mac OS X (10.7.3)
I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View RelatedI have a 6 yr old macbook pro that I want to give to my son.I cannot find the install disk that came with the computer, but I do have snow leopard.Can you help me erase my information and install SL?
View 3 Replies View RelatedI have a dual 1.25 ghz MDD Powermac G4. It was working fine until a couple of days ago. It froze up, I restarted it. I got a blank blue screen.
Also, the computer made some awful clicky noises that I've never heard before.
I booted from the OS X installation CD. Disk utility lists the WD1800 hard drive, but I can't do a re-install and there's no option to repair it.
I can't erase or partition it because when I try, I get a failure message saying it can't be done ("chosen size not valid for chosen filesystem"). The HD is listed in system profiler... with a capacity of 0 bytes.
I assumed that the hard drive had died, so I went to a local PC shop and bought the only IDE drive they had (a Maxtor 6l250r0). I installed it, then booted from the OS X CD.
I know that new hard drives need to be formatted, but I assumed that this could be done with disk utility.
But disk utility can't find the new hard drive, doesn't list in the left column. It shows the optical drives and the install CD and the old WD hard drive which can't be erased or repaired, but no new hard drive.
It's not listed in the system profiler, either.
I checked the cable connections and tried installing it in the front carrier rather than the rear, but nothing works - disk utility and system profiler can't recognize it.
The only other desktop mac I have access to right now is my old 450 mhz Sawtooth G4. I tried putting the HD into the sawtooth and got the same results - disk utility and system profiler can't find the new HD at all, but has no trouble finding the old 20gb HD and the DVD and zip drives.
I'm... not really sure what to do here. Am I doing something wrong?
I had to power off my iMac by Pressing the power key and holding it several times over the last few weeks. The last time it wouldn't reboot - I'd just get an apple icon. When I tried a safe boot I'd get the icon and it would change to a no entry sign.Next I started up from the snow leopard installation disk with the intent of repairing the iMac disk. The installation disk worked but when I opened disk utility it only found the installation disk. It didn't find the iMac disk.
Info:iMac, Mac OS X (10.6.5)
I just bought a new 1 TB external hard drive for back up purposes. When i connect it via USB to my Snow Leopard macbook pro, it gives me a "this disk not readable by this computer message". I click ignore, and it lets me do whatever i want to the disk - read, write, etc. I have tried repair disk - tells me it's good to go, and tried reformatting several times - thought not zero disk data or the 7 pass bs.
View 1 Replies View RelatedMacbook pro 15"
I was trying to install windows on my pro, and i had bootcamp chop the hard disk in half, but then my disk drive didnt read the cd so i had to download and install some file. and after i restarted i could no longer access the windows side, it just disappeared.....plus i cannot reset my hard disk, cant erase it, and i cant reinstall OS X because there is no memory left..
I decided to get a USB cable for the Canon MP650 I bought yesterday. I connected it, aligned the head and printed out a test page and it looks ok.
I used the disk that came with the printer and it said everything was installed successfully. Do I need a driver? That should be on the disk, right?
I'm using an iMac OS X v 10.5.8
I wanted to print a test photo, so I clicked on One-Click Photo Print and received an error message: The operation cannot be continued because a printer supporting Photo Print is not installed.
I clicked on System Preferences-Print & Fax, and there's nothing there. I clicked the + sign and in the window that opened, there's nothing listed there either. Why is installing a printer like operating the space shuttle?
i have been using an external HD for a while now, i was using it today and it was working fine, then out of the middle of nowhere, i get this message: "disk insertion" the disk you inserted was not readable by theis computer....i run disk utility and get this message:[URL]can someone please give me some advice, i have a ton of important stuff on this HD!
View 3 Replies View RelatedSo i put the OSX disk in (10.3) and when i make it boot from the disk the mac logo pops up then it shifts a quarter inch to the right and freezes. I then tried booting it normally and pressed the install button now it boots off the CD automatically with the same result and can't be turned off. Is there an emergency disk remove thing for a powerbook G4? And is there a way to reformat my computer without the disk?
View 1 Replies View RelatedI have a Mac Pro early 2009. On the original start up disk (1 TB) I have Snow Leopard. I have a 2 TB disk also installed on the same machine. I want to upgrade the machine to Lion and have everything end up on the 2 TB disk as the start up disk. I was then planning on reformatting the original start up disk and use it for Windows 7 in Boot Camp.
Info:
Mac Pro, Mac OS X (10.6.8)
Tried to restart didn't work. Light is on, but nothing makes noise or anyhting. Been charging it for hours so it has power. Tested the chord on my ther computer and it worked
Info:
MacBook
I am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
Information:
MacBook Pro
Mac OS X (10.5.8)
I have 2 internal Serial-ATA disks:
Both were checked (with Disk Utility and DiskWarrior) and are OK. But only one of the two disks shows in the Startup Disk list in System Preferences->Startup Disk.
PowerMac G5 / OS X (V.10.4.11)
3GB memory
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
I have a Macbook Pro . The hard disk failed smart disk and my laptop does not start any more. Is it ok if I replace the HDD with CGET or WD hard disk rather than the apple hard disk. the pros and cons of a non apple HDD.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.
Info:
MacBook Pro, OS X Mavericks (10.9)
Next year when snow leopard will be released I was thinking to upgrade my poor 60gb hard disk to something more probably to a 320 one, but I got one problem I lost my recovery disk and actually I don't really need it as you know Tiger is very stable.
When my old macbook will have inside the new hard disk do I need to reinstall tiger then upgrade it to snow leopard or I can directly install snow leopard?
I have an external 500GB Freecom USB HDD with two Data partitions on it (FAT32 and NTFS). With a Windows tool, I made the two partitions smaller in order to free up some space (ca. 200GB) for an additional Mac OS Extended (Journaled) partition. This partition I wanted to create with the Mac OSX 10.6.4 Disk Utility. When I pluged in my USB HDD in my new iMac it mounted the two partitions, NTFS and EXT32 and the Disk Utility tool also showed the free (unpartitioned, almost 200GB) space on the HDD. Then, I chose to create a new Mac OS Extended (Journaled) partition and let the tool do it. ...which I probably shouldn't have done. Disk utility stopped and showed an error message saying that it cannot read the partitions anymore and that it needs to be closed. No partitions can be mounted anymore since then on this HDD. Here is the logfile entry of Disk Utility (unfortunately, it's in German):............
View 2 Replies View Relatedi have asus m2n68-am motherboard and amd athlon 5000+ processor, 80 gb sata. when i am trying to install mac os x in disk utility it does not show my hard disk, can you plese tell me what can i do.
View 1 Replies View RelatedI've connected my new Iomega Minimax with a firewire cable directly to my iMAc but nothing appears on my desktop.
Info:
iMac
can't find app store in my computer
View 5 Replies View Relatedhow to find my computer in mac book pro?
Info:MacBook Pro with Retina display, iOS 5.1.1, 13 intch screen
Everytime I open my Imac, it cannot find connection to the mouse... Only when I cut off the power and restart it can find the mouse.
Info:
iMac (21.5-inch Mid 2010)
cant find the download on my computer
Info:
GarageBand (Mac) '11, Mac OS X (10.6.8)
I am looking for iMovie in my computer, and I can't find it anywhere. I have used it before, but I can't find it in applications or finder. I know it can be purchased from the Apple Store for $15, but I know it comes with the computer. How might I find this application?
Info:
MacBook Pro, Mac OS X (10.7.3)
All my other devices work just fine...
Info:
lion on all my computers?, Mac OS X (10.7.4), Where will my gallery and web go?
