Mac Pro :: How To Know About Hard Drive Config
Oct 14, 2008
Currently I have 2x500GB and 1x250GB in my Mac Pro. I use 1 500GB as my boot drive, another as my Time Machine drive, and the 250 GB as a scratch disk/boot camp (although honestly I usually forget it's there).
My free space on my main drive has been fluctuating between 20GB and 3 GB due to encoding video. So last night I went to Newegg's site and ordered a 1TB drive. My intent is to run the 2 500GB's in RAID.
So my question is... should I run the 1 TB as my boot drive or the 2x500GB as my boot drive? Short term it would be easiest to run the 1 TB as my boot drive since I'd clone it to the 1TB. If I want to run the 2x500GB as my boot drive I need to clone twice essentially.
View 3 Replies
ADVERTISEMENT
Sep 6, 2009
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
View 3 Replies
View Related
Sep 1, 2009
Got a new MBP last month to replace my white MacBook - loving it as an upgrade but one gripe - if I'm sat using it on my knee I regularly hear the "click" type noise of what I imagine is the protection of the hard drive because it thinks it is being dropped.
I never heard this on my old Mac and while it's not a huge issue it is a bit disconcerting, as though I'm being told off for moving it in a fairly responsible way.
View 5 Replies
View Related
Sep 9, 2009
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
View 7 Replies
View Related
Jun 3, 2012
How do i play media files from my external hard drive without transferring the files to my mac hard drive? I have a lot of media files and want to be able to play them soley from my external hard drive.Â
Info:
iMac (27-inch Mid 2011), iOS 5.1.1
View 2 Replies
View Related
Nov 22, 2006
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Sep 9, 2009
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
View 1 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Mar 9, 2012
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer
Info:
iMac
View 7 Replies
View Related
Feb 24, 2008
I just bought a new Mac Pro and do lots of Photoshop and want to swap out the stock 320 gig drive. I'm leaning towards 2 ultra fast Seagate 1 TB drives in a raid 0 configuration. The Raptor noise level scares me a bit.
Anything negative to say about the Seagate drives? Any other configs?
View 6 Replies
View Related
Mar 1, 2008
What is the optimal raid config. with four 300GB SAS drives? - Speed being the over-riding factor here.
View 6 Replies
View Related
Mar 7, 2008
I know...I know, I could try to do a search to see what others are doing but give an ol boy a break. I need advice...I have 2 F1 750s (just arrived), XP 64, and Fusion software setting in front of me. I also have the stock 320 HD already in my beast. What would be the best set up using all three HDs and loading XP/Fusion.
View 5 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Sep 9, 2014
Macbook Pro 17" Early 2011Â
Notes. Failed HDD ASD Test.  A new hard drive was installed in September of 2011 after the previous hard drive failed. Having worked well until now the system seems to give the same problems as it had previously. I am wondering if this is a compatibility issue as others have pointed out. Â
I have been told by the technician my only option is to replace the entire hard drive again for the second time with a new one. However to my understanding a ASD test is very specific and this my not be necessary? Further I am attempting a final backup just in case. I don't have to take it in where I could just back it up myself without the system shutting down.
Info:
Mac Pro
View 5 Replies
View Related
Feb 19, 2008
Do I need to jumper these any particular way?
Bay 1: Stock 500GB (Windows)
Bay 2: 150GB Raptor (for OS X / apps)
Bay 3: 150GB Raptor (for Pro Tools Audio)
Bay 4: 1TB Barracuda (for Time Machine)
View 3 Replies
View Related
Sep 15, 2009
OK I just got a new Nehalem quad core Mac Pro. I am new to Mac and I bought it because I will be doing some heavy video editing. I have 4 harddrives for it, a 640gb that came with it, and 3 1TB seagates barracuda's. My question is exactly how I should set up my RAID config to be as fast as possible?
I have read some articles about RAID 0 on Mac Pro's but am a little confused. Setups that any of you use would be much appreciated.
View 2 Replies
View Related
Oct 2, 2008
I've just setup the basic installation of 10.5 server. For some reason it's picked up the wrong info for the .config file - it's using my laptop's name.
So to access remotely via ssh, it says I need to use "ssh myServerName@myLaptop.config.
Why has this happened and how do I change it?
View 1 Replies
View Related
Sep 4, 2010
I seem to have trouble connecting my mpb with certain hdtv's - sony, toshiba. the screen resolution seems to always be bigger than the actual tv size, so the ends are cut off, such as menubar and dock can't be seen.
i can't change the settings on my tv, and the display settings on the mbp are limited. is there any app which can adjust the screen size manually? such as a zoom out tool?
View 1 Replies
View Related
Aug 14, 2010
I'm a FCP / AE / Compressor user and have been in the market to upgrade my painfully slow G5 for years now. I'm pulling the trigger on a 2010 and trying to decide the best set up. I'm going with a 12-core but thinking the 2.66. Not sure if the extra $1200 can be justified to go to the 2.99. Anyone have an opinion?
I thought with that $1200 I could get more RAM instead. So, my second question is what the best move would be for RAM. I'm going with the base offering from apple and will remove and replace with either 2 or 3 8GB sticks or more 4GB sticks.
View 11 Replies
View Related
Jan 4, 2011
Figured I would come right to you guys (even though I'm a Macbook PRO owner I know this is the place to ask questions)My current config is a 1.8 GHZ Core 2 duo (base)13" model, 128GB SSD, 4GB ram upgrade (is this smart?)Warranty 1 year...will upgrade later this year.Free printer..100 cost, 100 rebate..worth it?Anything else I should add? How will this perform with imovie, iphoto, windows dual boot if I choose to?also adding pre install of iWork...41 bucks to add with student discount and promo price.
View 16 Replies
View Related
Sep 15, 2010
Had a hard drive failing/failure. I am having my bad hard drive replaced with a bigger hard drive. (New Obviously) I have an iMac. (1.83GHz Intel Core 2 Duo 17-inch) To have my data transferred from the old drive will cost over a hundred bucks more. I am trying to save money but transferring it myself. All im looking to transfer is my photos. I did not have an external drive but i WILL purchse one now. My question, (to save some money) is how would i transfer my old pictures from my old drive, too my new installed hard drive. Can i use USB? Firewire?
View 2 Replies
View Related
Jul 20, 2009
I've just got a new external HD, but it's not being recognised by Mac OS X (10.5.7). I assumed it was because it was in a Windows format, so booted Windows, but it then turned out it wasn't formatted at all. What is the easiest way to make this an HFS+ (the Mac OS extended format), and how do I do it as I can't see it anywhere on the Mac (including Disk Utility)?
View 6 Replies
View Related
Sep 11, 2009
I'm replacing my old 120gig hard drive with a new 320gig hard driveWhen Ive got the new hard drive installed can I just put the old hard drive in a enclosure kit/caddy and copy my music/movies/etc across to the new hard drive?Or do I have to copy the data off before I remove the old hard drive?
View 3 Replies
View Related
Apr 19, 2010
i just installed a new 2nd, (750 gb) hard drive into my g5 because my first 250gb is nearly full. I'm trying to launch logic but the file is way to big. It wont let me install this program from my new, second hard drive because the message i get is that it supposed to launch from the primary or running hard drive. Can anyone tell me how i can make my second hard drive my new primary hard drive? I got the .dmg for my leapord osx. but not the originals anymore. can anybody help me with this. i'm pretty sure it's simple, i just don't know how to do this.
View 5 Replies
View Related
Jul 24, 2009
Whats the difference between a PATA hard drive and an ATA hard drive?
I bought one of ebay for my 15" Powerbook, i got it today, and it doesn't work lol. But the post clearly says, will work with all ibook's, and Powerbooks, So im not sure if it's the right kind of drive. The HD i ordered is on route for a replacement, so hopefully it was just a defective drive.
View 7 Replies
View Related
Mar 1, 2012
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
View 3 Replies
View Related
Mar 15, 2012
Transfer information from one hard drive to another hard drive
Info:
PowerMac, Mac OS X (10.5.8), G5 dual 2.0 processors
View 4 Replies
View Related
Apr 12, 2012
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
View 1 Replies
View Related
