I have a small server type item and it takes ide drives, i want to get some terrabyte drives and install them with sata to ide adapters.
There is not a lot of room in the top as the container around it slides on it and the ide ports are on the top of the item where the lid slides on,
i need to get some sata to ide adapters that either have flexibility or are long cable type adapters?
What is the best way to go about this? I have seen some on Amazon that are dirt cheap but I don't know if they work. This is kinda off topic but will this work with a g4 AGP?
USB 2.0: [URL]
Gigabit Ethernet: [URL]
I'm hoping this can be answered with a simple "yup" so here it goes.
I have an 8-core 2008 Mac Pro tower. I need to throw a blu-ray burner in it.
The tower only has IDE interface cables for the two optical drive bays.
Will these play nicely together?
I have a lacie d2 firewire drive (120GB) that I want to upgrade to a 1TB HD, I know that the internal connection on the drive is IDE, however I have not seen drives of 1TB that have IDE connections on them. I have seen these IDE to SATA adapters and I am wondering if it will work for me if I get an internal SATA drive to replace my 120GB, assuming I have enough space to insert the adapter.
View 3 Replies View RelatedI'm looking to upgrade my hard drive, cloning everything over to the new one via external adapter. Are there any adapters out there that use FireWire 800 so I can get the best speed possible?
View 9 Replies View RelatedThis weekend I starting getting the clicking sound of death from my boot drive. Today I ran out and got a Western Digital Caviar Black 2TB HDD that is SATA/300 drive. Are the higher read/write speeds supported by the MP 3,1 controller?
As I write this, I've got CCC cloning the entire drive and praying that it doesn't fail mid-copy.
I'm at a loss at the moment trying to find a 4-bay SATA enclosure that is compatible with the Highpoint RocketRAID 4322.
Could I get some recommendations?
Here's the RAID card:[URL]
Can anyone recommend a SATA RAID card for a G5? I'm looking for a hardware solution as opposed to using a software RAID controller.
View 1 Replies View RelatedI have a 13" MacBook Pro 2011, 2.3gHz, 320GB. What connector does it have? And would SATA still work with my laptop? One more question, what are the exact dimensions of the hard disk drive bay in my laptop, the manual only says 2.5".
Info:
MacBook
Pro, Mac OS X (10.7.2)
My iBook only has USB ports. My Canon Camcorder wants to see a Firewire port to load movies. Never occured to me that Canon and Apple would make incompatible products.
View 7 Replies View RelatedI think my 23" ACD's AC adaptor is broken as it does not power the ACD. There are a few replacement AC adaptors on the market. Can you tell me which one I need to buy?
I was not able to power the 23" ACD with the one for a 20" ACD (45W). So, the replacement I need should be at least a 65W unit.
I've seen a video (although in German) of a magnetic USB adapter.
In the video, the girl plugs in a male USB piece into the car's radio and fits a female USB piece on the end of a USB Drive. They magnetically attached and the radio played music.
The magnetic pieces really reminded me of the MagSafe adapter.
Does anyone know where to find the magnetic USB adapter?
I want to use it to simplify docking my MacBook Pro so I only plug in the MagSafe and USB. I'll have input devices, USB sound card, external hard drive and my iPod plugged into the USB hub hidden under the desk.
I have a macbook that is not wireless n enabled. i know i could take apart the macbook and install a new airport card that is and that would work (and probably will one day soon) for the time being would a usb adapter work the same?
Also airport seems to drop its connection pretty frequently and doesn't like to work more than a few feet away from the docking station. I'm hoping it's because the airport card is old. Would an adapter fix this as well?
I have a MacBook Pro with a 128GB solid state. Is this SATA II or SATA III?
View 3 Replies View RelatedIm considering purchasing a higher capacity internal hardrive around the 750Gb/1Tb mark. However my macbook is the early 2008 model, and it seems the majority of hardrives are SATA II, having speeds of 3Gbt, which my mother board may not be capable of (apparently only 1.5Gbt) From researching and reading some reviews of others who have purchased internal drives on Amazon UK, some have had difficulty due to this problem, but have been able to fix the issue with a firmware update reducing SATA II drive speeds to 1.5Gbt.
Questions I have: Do all SATA / SATA II internal hardrives need a firmware update if replacing on to a new computer?(If so, would I need to look for a specific firmware update for the specific drive I intend on buying? And if you're in the knowledge would you mind posting links to these updates?)What is the process of updating the firmware i.e. would I need to put firmware on external usb hardrive 1st, then upload it to macbook after installing new internal drive (if it boots up my OS that is) etc. Would a 'hybrid' (disk+solid state) drive be compatible with a macbook as old as mine?Do I need to update my operating system to OS X Lion first, or can it be done after installing the drive?
my current laptop hardware:
Macbook Pro 15.4" (Early 2008 Model)
Intel Core 2 Duo 2.4Ghz ProcessorGeForce 256Mb 8600M GT Graphical Processor
Intel ICH8_M AHCI 1.5 Gbt MotherboardToshiba MK1655GSXF 160Gb 2.5" Hard DriveOperating System: OS X Leopard 10.5.8
Info:
MacBook Pro, Mac OS X (10.5.8), 15.4" 2.4Ghz (Early 2008 Model)
My friend found an old Performa 6300 from 1995. It's fully working aside from the missing ADB mouse. I've been searching for an ADB to USB adapter or even an USB card but to no avail.
View 4 Replies View RelatedSo there has been a kink in my magsafe adapter since I first got it. Today the cord just spit, has this happened to anyone else?
View 1 Replies View RelatedHere is one possible adaptor for using LED 24" display on DVI video output:
[URL]
I'm about to purchase a Epson R1900 A3 printer, than doesn't come with a USB cable or anything to conntect it to my Mac. I own a wireless printer already that has wireless built in, and would really like to have my A3 printer wilress but I'm having trouble finding a good adapter ( printer server) that is cheap ( i.e. a little more than a good quality USB cable )
Any ideas/reccomendations as to where I can get one ?
I'm going to University next September (hopefully), and I want to be able to play my PS3 on my Macbook display (instead of taking my massive TV).
And I'd also like to be able to connect my freeview box which is a RCA/Scart connection. My PS3 is also RCA/Scart.
I still have a spare 85w Mains adapter and I'd like to be able to use it - my understanding (correct me if I am wrong) is that the MBP will pull the wattage from the mains so a larger one will do no damage. The Apple guy says he wouldn't recommend it (and hence tried to sell me a new 65w one).
View 7 Replies View RelatedI have a 2009 mac mini with dual display. One mini display port and one mini dvi port. I would like to buy two of the recently discontinued 24 inch led display. I know I can connect one monitor via the mini display port.......my question is how would I connect the second display?
Is there a mini dvi to "mini display" adapter?
I have a Rev A Macbook Air with Micro DVI out. With the Micro DVI to DVI-D Dual Link. I am trying to find an adapter from DVI Male to HDMI Female to run to my HDTV.
View 1 Replies View RelatedI need to pick up a second power adapter for my 13" MacBook Pro to keep in my bag to take with me to work. I don't particularly want to spend the $75ish for an Apple one if I can avoid it. Is there a decent cheaper 3rd party adapter out there that works well?
View 3 Replies View RelatedI am on my new 27" iMac last night when all of a sudden the display froze and pix-elated for a second and then went black and a few seconds turned back on with an error message at the bottom right screen saying my display adapter had stopped . . . . .
I was in Windows 7 64bit Professional at the time. I also noticed that Apple is wanting download a newer version of Boot Camp which I will download tonight!
I went to the ATI website and found a new driver dated 4-2010 and downloaded it. All seems well but was wondering if anyone has had the same issue?
is there an adapter for an old Cinema Display to hook up to at PowerPC G4
View 2 Replies View RelatedI have a macbook and I want to get a cinema display but I heard that the cinema displays from apple do not work with any other computer.
Does anyone know where I can get an adapter to have the display work with non-macbooks?
Also I posted this question on Apple Forums and they removed it with no answer because it can lead to rumours about new product releases so I am seeing if anyone here has an answer.
I'm looking for a new HD to replace the original, now failing Maxtor drive in my G5 tower (1.8 Ghz dual processor, purchased in Aug. 2004), and have just about settled on the Western Digital Caviar SE16 series. It seems there are two types -- SATA and SATA II -- and I'm not sure about how to make a decision on which particular WD model to buy.
Will either type work in my machine? Or would the SATA II have potential compatibility problems? I read somewhere in these forums that someone with a G5 had bought an SATA II drive, and it wouldn't run with his system. (He said he had to reset some jumper switches to reduce the transfer rate of the drive ??, but now I'm told elsewhere that SATA drives don't have jumper switches.
Information:
1.8 DP G5, 1.5 GB RAM w/ Superdrive
Mac OS X (10.3.x)
I might be purchasing a 30 inch cinema display and currently have a mid-2009 unibody MBP. I know I need the cable to power it, but do I need to drop the 100 dollars for the apple one or are their any alternatives?
View 4 Replies View RelatedI have ordered my first Mac, a Mini 2.66Ghz and I will put a Intel X25-M SSD in the machine to speed it up further. I hope I will be pleased with it
However, the question I encountered was whether the sata connection in the Mini is SATA-150 or SATA-300? Does anyone know?
