Following upgrading to 10.7.4, both of my Ethernet interface are dead."Unplugged cable" is what the network preferences panel reports.Starting from the Recovery HD the interfaces work.Mac Pro 2 x 266 GHz Intex 6-core 16 GB of Ram.
Info:
Mac Pro, Mac OS X (10.7.4)
I upgraded to Lion and I lost my database in Keymanager
Info:
iMac, Mac OS X (10.7.4)
I have just made the dreaded change over to Lion and iCloud from Snow Leopard, every thing was working fine however I am not connecting to the mac mail server anymore, I am getting a message which reads along the lines of, Verify the settings for account xxxxxxxxxxx@mac.com or try again. The server returned the error: The server p99-imap.mail.me.com refused to allow a connection on port 143.
Info:
MacBook Pro
i dont have the hardware test anymore. I've upgraded to Lion. I have read that you can reinstall it from the original install disc that came with the mac but i lost mine. is there any other way i can gat it? On on a macbook pro 17 inch mid 2010?
Info:
MacBook Pro, Mac OS X (10.7.3)
I've been using a G4 mini running 10.4.11 for web surfing, email, and document scanning for about 4 years with few issues. Recently, though, it loses its wired ethernet connection when I wake it from sleep. No ethernet device appears in Network Preferences/Network Status, and Network Utility shows the ethernet connection as "inactive". If I disconnect the ethernet cable for a few seconds and then reconnect it, the ethernet connection reappears in Network Preferences, goes "active" in Network Utility, and functions normally.
Once ethernet reappears, I can wiggle, tug, and disconnect/reconnect the cable and maintain the connection. The cable works normally with another computer. So it doesn't seem to be a hardware connection issue. The network has 2 other wired computers attached with no issues (an old homemade PC and a Mac Pro) and several other devices via both wired and wireless connections. So I don't think it is a router or dhcp issue. I don't recall installing any new software, although I install all Apple updates (including iTunes) when they become available.
I'm trying to find a gigabit fiber NIC for a powermac g5. The one is found is the Stallion GE-II
[URL]
I've tried a couple other cards that have been lying around, but none of them fit in the two pci slots. The pictures of the Stallion GE-II on the website show that the copper connectors don't match the motherboard PCI.
i want to output audio on two interfaces. the headphone jack and USB (bose companion 5's)
View 3 Replies View RelatedIf it is possible to connect an IMac to a macbook pro and use the mbp's keyboard and screen as an external monitor? The reason is I need the most powerful IMac for the programs I am running, but i love notebook interfaces.
View 1 Replies View RelatedHas anyone tried connecting a WD My Book Studio Edition external hard drive to one computer via USB and to another computer via FireWire 800 simultaneously?
What are the chances that both computers would be able to access the drive simultaneously?
I upgrade to Lion after being told that it would upgrade my iLife to iLife 11. But that doesn't seem to be the case.
View 1 Replies View RelatedThere's a thread in the macbook pro forum about this (that I bumped) but I didn't realize it was the wrong forum so I'll post here too.Whenever I plug Firewire audio interface into my macbook , even with no programs running and the computer essentially at idle, the CPU temperature quickly rises several degrees and then the fan quickly ramps up to maximum. Nothing appears to be placing the CPU under load at this time (measuring temps and fans with iStat nano). Of course, if I do put the CPU under load, the temps get very hot, 80C
View 17 Replies View RelatedI used to have WavTap and Airparrot but their audio interfaces are still straying in my other audio interfaces, and I would like to delete them.
How can I do this? I tried Audio / MIDI configuration but can't click the [-] sign to delete them.Â
Example image:
Info:
MacBook Pro, OS X Mavericks (10.9.2)
I like to install a ethernet Bond with two additional netgear ethernet cards. but i dont have a signal on the bond.
who knows more. the machine is a powermac g5
I was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
View 4 Replies View RelatedI just bought an airport extreme w/gigabit, and I'm wondering if it's possible to connect an ethernet switch to one of my pro's ethernet ports and have things like my xbox 360 and ps3 run off it, however, my mac pro would be connected to my airport extreme via 802.11n. is that possible?
View 3 Replies View RelatedI just booted into Windows and saw that there were some Windows Updates available and it asked me to reboot the computer however it failed to boot into Windows. So I restarted and tried to boot into OS X instead, but that didn't work either.
So I put in the OS X install DVD and checked out Disk Utility. Turned out that all my partitions where screwed up. There were 3 partitions listed as Windows_ldm, with incorrect sizes (I had 4 partitions before).
Long story short: I'm now reinstalling OS X and I lost everything I had on the drive, I think. I'll try some restore software once I've gotten OS X installed.
A little pissed right now... How the heck can Windows F up the entire drive?
Ever since I upgraded to 10.6.4 I'm often getting high CPU % - it's getting annoying. It happens while watching YouTube vids, using VMWare etc., and I've also noticed Finder frequently becomes a freakin' CPU hog, bumping the % to 100%. Also, I think my MBP is running a couple degrees hotter in 10.6.4 too. What the hell
View 3 Replies View Related256 SSD - want to upgrade to 512 or larger SSD. is this possible.
Info:
MacBook Pro, Mac OS X (10.7.4), 256 SSD - want to upgrade to 512
As title says. Upgraded to 10.6.2. I thought this was supposed to be fixed?
View 3 Replies View RelatedI have upgraded from using iMovie but I seem to be having a problem. I am trying to capture HD video from a Canon XH A1s and it works fine on iMovie but no matter what settings I have tried in FCP it always says that it could not connect to the deck and to try and make sure all the wires are connected. Basically it cannot connect to my camera but yet iMovie has no problems how do I fix this? EDIT: discovered a few things don't know if its helpful or not but I notticed: 1. imovie is in fact capture SD using the DV standard even though the camera is capable of HDV (also I have no problems capture DV in FCP ether just HDV )2. If I set the controls to DVCPRO I can control the camera in FCP but I can't capture or see a video preview.
3. No matter what I try it will not let me control or even recognize the existence of this camera in HDV format.Edit 2 : Problem Solved! The camera was set to auto detect HDV or DV and was not working right so I forced it into HDV and now it works fine
I currently have a 17" 2.8GHz MBP, it's the previous edition just replaced in this latest release (purchased about a year ago). I'm considering selling my current MBP and replacing it with the new i7, but I'm not sure it's worth it. I'm a photographer and do all of my editing on this laptop, so any boost in speed *should* help my workflow. I'm also a p/t student, so I qualify for academic pricing, and the free iPod they're currently offering.
View 8 Replies View RelatedUpgraded to Lion on my MacBook Pro. Since then cannot see any external device (USB, CD, etc)
Info:Mac OS X (10.6.4)
What steps and considerations do I need to take/make in order to upgrade from Leapord to Snow Leapord or Lion (if that is even possible).
Info:
iOS 5.0.1
I am fighting with upgrading my XCode 4.2.1 -> 4.3.1, but im unable to do so from App Store, which claims i have the latest version everytime.
Info:Macbook Pro
I just upgraded my Macbook from OS X 10.6 to OS X 10.7 but have just realised that front row has gone?Â
Info:
MacBook, Mac OS X (10.7.3), 2.4Ghz CD2, 4Gb, 250Gb 7200rpm.
I upgraded my ram with Crucial 8gb kit for my Macbook Pro (Mid 2010). After playing a game I noticed that my fan speed was much higher than it originally was when I hadn't changed it and it was 4gb. I already tried resetting SMC and nothing has changed.
View 10 Replies View RelatedI have a MacBook Pro running OS 10.5.8, attempting to upgrade Adobe CS3 to CS6. Alert states 10.6 is required. Can my laptop be upgraded to higher OS?
Info:
MacBook Pro, Mac OS X (10.5.8), Upgrade to 10.6?
Just upgraded my itunes to 11.2.2 and now it will not open. Message pops up saying, "This version of iTunes has not been correctly localized for this language. Please run the english version." I cannot do anything else in iTunes though. It just shows me that message.
What can I do?
Info:
MacBook, Old White MacBook
Was burning a few CDs when I got the notice to upgrade.Â
Upgraded.Â
Now it won't burn CDs...
Can a Macbook that runs on 10.4 Tiger be upgraded to 10.6 Leopard?
I bought a used Macbook. It has the following specs:
MacBook 2,1
Intel Core 2 Duo
2.16 GHz
4 GB Memory 667MHz
I reformated the Mac for a fresh start (20GB+ of the space were used up and the seller claimed that everything was erased)
However, the sad news is that the discs that the seller sent me appear to be 10.5.2 Tiger. In the auction, seller claimed that the OS is upgraded to 10.4 Tiger. When I tried to install, I get the error saying that "This software cannot be installed."
So... now it looks like I will have to buy an installation disk?
My question is will this laptop be able to run a 10.6 Leopard (I just put this example in because it seems to be the most popular one or something. I am new to Mac.)? Or will I receive the same error for that 10.5 Tiger?
Currently, this laptop has no OS installed.
