I have a macpro 2008 Running Lion. Mouse stops responding to left click. Restart does not always solve. Have reset PRAM and installed a clean updated copy of Lion still regular problem Â
Info:
Mac Pro, Mac OS X (10.7.3), Mouse fails even after reboot. Rese
I had to dissassemble my wireless Mighty Mouse to clean it properly, as the trackball was unable to scroll up and down. As I had cleaned the trackball, I attached the two internal cables to their respective "slots" again and assembled the mouse.
Now my right button does the same as the left button (right click = left click). I tried dissassembling the mouse again, but I cannot see what I could have done wrong. After all, there are only two cables to attach and de-attach inside it.
I just bought a mighty mouse, happy as I was, plugged it in and started my ibook running OS X 10.3.9.I know the mighty mouse shouldn't have full functionality (as the software delivered with it is >10.4.2).The problem is that the right click doesn't work right. When I try to right click it sometimes takes the right click, sometimes takes it as a left click (which is extremely annoying in firefox or finder).
I have SteerMouse (I'm a windows/linux user too) installed but when I de�nstalled it the problem remained.
When I plugged the mighty mouse in my pc (at that time running windows) right click just worked.When using a cheap mouse (from pleomax) the right click on the ibook (with Steermouse installed) works all the time.
I find this al really confusing. Seems like it can't be the hardware because it works on windows, but it can't be the software because another mouse does work.
I noticed that when right clicking at the total right side near the "expose-button" (not a position my fingers lay naturally) right click works all the time. I don't hope this is normal?
I can't left click in any apple apps in the main admin user. Other users no problem but problem too weird for me to track downÂ
I CAN left-click in finder, system prefs, Safari, Pages, stickies and any and every thirt party app without a problem.Â
BUT, Â Mail, Contacts, Preview, Maps, Aperture, Notes, iCal, stickies I can scroll and right click but not select anything. Nor can I close or minimize windows.
CMD-P in an unresponsive app brings up the print dialog but can't choose any pdf options or any other options
Affected apps can be moved from the title bar but not resized , restarted multiple times, reset pram, trashed prefs of affected apps as well as bluetooth.Â
Info:
Mac Pro, OS X Mavericks (10.9.3), magic mouse
I have Mac Intel Base running OS 10.6.8. Finder seems to be corrupt. I have checked the system and it seems to be working properly. However, my Mouse and keyboard stop responding when I relaunch finder, and I have a very slow start up time (10 to 15 minutes till the mouse and keyboard respond). I ran Disk Warrior and got a lot of permission and file errors. Disk Warrior says they are fixed, but every time I run Disk Warrior or Disk Utility the same errors keep showing up. Trying to go to safe mode to check to see if extensions are an issue doesn't work because mouse and keyboard do not respond so I can't log in.
Info:
Mac Pro, Mac OS X (10.6.8)
The last 2 days I have had the left mouse button on any Device on my MBP stop working. Tried SMC reset and it seems to work but them it happens again sporadically requiring a shutdown and I assume another SMC reset. Â
Info:
MacBook Pro, Mac OS X (10.7.4)
At least a couple times a week my trackpad mouse click stops working (mouse movement ok) and I am usually browsing in Chrome ver 18.0.1025.165 I have MacBook Air 13" with Lion 10.7.3, anybody experiencing this problem or have resolved?
Info:MacBook Air, Mac OS X (10.7.3)
i have a wireless mighty mouse for 9 months and today i had a serious problem. I had the casual problem with the trackball but i used to rub it on a clean peace of paper and it was fixed. When i done this today it won't right or left click. All it does is open the dashboard which this is the middle button. When i set off the middle button it can left click but not right. What the heck is going on? What should i do? Can it be fixed or do i need to go on an Apple Store and get a new one? God i hate this mouse. By rubbing it on a paper, the trackball is now scratched. Will this affect my warranty?
View 4 Replies View RelatedI'm trying to get my wired mighty mouse working to my satisfaction but it wants to left click if I touch the mouse anywhere as far back as the apple logo. Thats a little far back for a left click so I'm doing it when I don't want to. Btw, I made the left button my primary button coming from a windows PC background. Also how to I reset everything in the mouse settings, I've changed alot of things.
View 4 Replies View RelatedI got a Magic Mouse for Christmas this morning and set up with my Macbook Pro. The setup went quickly and well. I was able to move the cursor around my screen with the Magic Mouse.
However, the click buttons don't work. I have tried left and right clicking and nothing happens.
Is there a problem with my mouse or did I miss something in the setup?
Clicking with the left and right mouse buttons doesn't seem to be working properly. I first realised this when a message box warning me of low disk space popped up and I couldn't click on OK. Scrolling with the ball works, as does clicking with it. I restarted my iMac and removed the batteries from the mouse for a minute, but all that happened was that left and right clicks started acting like middle clicks. A wired mighty mouse works fine. I've tried cleaning it by turning it upside down and rubbing the ball on paper and a clean damp cloth, no change.
View 4 Replies View RelatedI'll try and click on a link and nothing, then I click bookmrks in the menu bar, it works, then i can go back and be to click on the link and it'll work.
View 2 Replies View RelatedIs the right click noise supposed to sound different to the left click? Mine does, is that normal?
View 7 Replies View RelatedI've noticed after upgrading to 10.6.5 that my keyboard will not work when I come back after an extended period of time away from the machine. At first, after applying only the 10.6.5 update, neither keyboard nor mouse would work unless I unplugged and replugged the keyboard (the mouse is connected directly to the KB). Later, I installed the combo update, and then the mouse worked but the keyboard still wouldn't. This is after my display sleeps - as long as I continue to use the computer, everything works fine. I have a mid-2009 Mac Pro 2.66 GHz quad-core (Nahalem) but with the older (clear, G5) keyboard and a mighty mouse.
View 2 Replies View Relatedanything i do brings the spinning beach-ball all the time, I already installed lion clean, nothing, still doing it.
Info:
MacBook Pro, Mac OS X (10.7.4)
I just used an OSX Server v 10.5.0 DVD to upgrade a computer (1.6 ghz G5 tower, 1.5GB RAM) from osx 10.3.9 server. When I get to the 'Serial number' panel, none of the fields will accept any keyboard input. The keyboards worked prior to the upgrade. They work fine on another mac. The eject, volume, and caps lock keys all work. Just the fields themselves in the Serial Number (and the registered to, and organization) fields are ignoring input.Â
Info:
iMac, Mac OS X (10.6.8), 3.06 GHz intel core 2 duo, 10GB RAM
My imac is about 18 months old. Latest software download.Will not start up properly. After the Apple Logo, sign comes up on the screen stating "startup disk is full".
Info:iMac
In the last few days I've had a recurring problem: Randomly and without any obvious context in terms of actions, apps etc, my trackpad simply stops responding. I have all options enabled on the trackpad, such as soft click+drag, and the problem has so far only occured when performing that: drop'n drag.
It get's stuck and I cant release whatever I've gripped. I am now only able to use the keyboard and have to reboot to be able to use the trackpad again. After reboot the problem returns randomly after a while. I can't think of any recent software updates or additions that have coincided with the problem, except installing Livedrive Briefcase recently.
The problem however does not specifically occur when working with that (though Livedrive is set to run in the background). The problem occurs more and more often, usually after I have closed the lid (sleep). Also, I am able to use my Magic Trackpad, which in turn brings the build in trackpad back to working!
MBP: 15" 2.4 Ghz Intel Core i5 (dual core) 2010
System: 10.7.3.
HDD: 240 Gb SSD with 91 Gb of free space
Info:
MacBook Pro, Mac OS X (10.7.2), 2.4Ghz i5, 8GB RAM, 240 SSD HD
I have not been able to update my software in a while
The updatte will get to there and just stop. Doesnt matter how long I leave it there or what I do. Tried a few things but nothing has worked.
Info:
MacBook Pro, Mac OS X (10.7.4)
I work NOC Support / Operations for a decent sized provider in the midwest-ish area. I configure radios, routers, switches, etc CONSTANTLY. I need an ethernet interface. So I have the ThunderBolt Gig Ethernet adapters. Â
I plug one in every day, running DHCP, no issues. Then I roll it over to a private IP to setup a radio. At this point, the interface is dropping (because I am rebooting the radio over and over), and I have to change the IP on it consistently. After making four to six changes, the interface just stops responding. In the network prefs, its red, as if it doesn't have a good working connection. I open the network anaylizer, and it shows me that the interface is up, with no IP. Â
I've disabled the interface by turning it off, nothing. I have unplugged the adapter and the cable, network anaylizer still shows the port up and negotiated at 100/1000, but theres nothing there...
My computer will start running really slowly and then the keyboard stops working, then after 30 seconds or so I lose the ability to click but the mouse still moves. Command-option-esc for force quit still works some of the time though but refreshing everything from there doesn't help. After I reboot everything goes back to normal. This has happened every other day or so for about a week.
Info:
MacBook, Mac OS X (10.6.8)
Since I had to jump through all kinds of hoops of the actual apple support page, I eventually turned to the community now, which as ironically a whole lot easier. Anyways, My problem is basically with BootCamp.I'm trying to run the CryEngine 3 SDK on a late 2011 macbook Pro, and the specs including the graphics card should be enough to handle it easily.Yet everytime I try to launch it, it plays for a little while (2 minutes) then comes up with an error along the lines of "Display driver has stopped responding and has recovered".Â
I've checked and I have the latest drivers for the graphics card on the mac installed including the Catalyst Control Centre porgram. It seems like it should work, but it refuses to.I've read up on it a bit and it may be a problem with overheating, since when the mac beging running the CryEngine the fan starts going like crazy, basically at its maximum capacity, so It might be a problem with Over heating.Â
I've also heard that due to a few compatibility issues with Windows 7, the graphics dont switch properly which leads to this error and can be fixed by entering the windows BIOS and switching the graphics switching from dynamic to fixed, however i'm not sure if I really want to meddle with the BIOS.Â
I've checked both the CPU and the total RAM when running CryEngine however the RAM only gets to around 50% whilst the CPU barely tops 20%. Also the graphics card being a AMD Radeon HD 6770M is something that should be able to handle it.Â
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Using BOOTCAMP Windows 7 64Bit
I know that the general consensus here is that the Mighty Mouse is a piece of shit. That notwithstanding, I'd appreciate posters refraining from engaging in further elaborations on that concept when replying to this topic (i.e., no comments like "Buy a new mouse," please).
At any rate, I purchased a wireless Mighty Mouse about a month ago and was very happy with it until the batteries apparently died. One day the pointer simply stopped responding and the green light on the bottom of the mouse was flashing. I replaced the batteries and the mouse resumed normal operation. Then, a few days later it happened again. I have yet to re-replace the batteries and have reverted to using my now eight-year-old Logitech dual-optical mouse (possibly the finest peripheral I have ever owned). Has anyone else encountered this issue?
Is this mouse having internal hardware or software issues or is it normal for it to devour batteries at this rate? System Preferences says that Bluetooth is maintaining the connection properly, so I am ruling that out as an issue. I would just say to hell with it, and use my Logitech mouse full-time, but my wife hates it and I payed seventy goddamn dollars for the Apple product.
Just downloaded MacKeeper onto my 2011 MBP. Suddenly when I open safari, every page stops responding almost immediately after loading. The pages load from the bookmarks, so I know that the connection is good. Once a page hangs I can open another page, which then also hangs.
Info:
MacBookPro
I am having trouble starting my 21" iMac running Snow Leopard after I had shared the HD with my MB-Pro. I had removed the "everyone - Read Only" rights on the HD (on the iMac) and opened sharing so my MB could attach to it. Grey Apple Logo and progress circle upon startup now.Can changing these rights cause the system to not boot? I can go into single user mode but I am not sure what to do then.
Info:
iMac, Mac OS X (10.7)
This has been happening on and off for ages, from half a year to a year. I have been trying to open a document for 4 hours now, it opens it and then freezes, i then have to force quit it and start over again. Some times i have left it for a while others i quit it after it stops responding. It is getting ridiculous now, i have also searched for ages on the internet, some problems are unrelated some seem related but the fixes don't work, I need to get word to stop doing this.Â
I thought maybe it was because it keeps opening all my previous documents that I had open, i unchecked the box so it doesn't reopen windows and it still freezes but on this document instead. I do not have a clue what to do and I urgently need access to these documents, the documents aren't damaged, i was working on them before, and had this problem with many other documents that also weren't damaged. What should I do?
Info:
MacBook, Mac OS X (10.6.7)
I have a 27" iMac purchased in July 2011. I never had any issues with the trackpad before upgrading to Mavericks. I upgraded a few months ago and started having sporadic issues with the trackpad. When the iMac woke up, everything seemed fine at first. About once or twice a week, after it had been working for about a minute (just enough time to start web browsing), the trackpad would suddenly stop responding. It then progressed to being more consistent (every other day). The cursor was still visible and the keyboard still worked. The trackpad was still on but apparently not connected. I thought it was the batteries, but new batteries didn't work. I could get the trackpad to work again by using Spotlight to open the Bluetooth System Preferences. The trackpad worked immediately when Bluetooth preferences were opened (nothing needed to be changed; it would just start working).Â
However, it would stop responding after about ten minutes. It was interesting because even if I left the Bluetooth System Preferences open, it would still stop responding after about ten minutes. I could use the keyboard to make the preferences window active and it would immediately work again. It would then work again for a few minutes and then stop. I found that removing the trackpad and re-connecting it would cause the trackpad to start working again more consistently. It would only stop if the iMac went back to sleep for an extended period (overnight). Â
The useful keyboard shortcuts are cmd + spacebar to open Spotlight, type bluetooth, use the arrow keys to go to Bluetooth system preferences (hit enter), use the arrow keys to go down to the trackpad, press spacebar to unconnect, again to confirm, and then after the trackpad is automatically rediscovered, press spacebar again to pair it.Â
This went on for about a month, when I had what I suspect was an unrelated problem. The trackpad started acting as if it was being held down (left click was always being pressed). I took it into the Apple Store and they confirmed it was broken. At that point I had a brand new trackpad. Â
The issue had gone back to happening every other week or so. I thought it might be interference, but I've since physically moved apartments and all the objects around it. It's been a couple months now and it's back to happening every couple of days or so. Since the trackpad is brand new, I have to think this is a software issue. I've noticed the following consistently:Â
1) It only stops responding if I've put it to sleep (I usually do so with a hot corner, but I don't have any reason to believe that's related) and haven't used the computer for more than 12 hours.
2) It'll always work right when it wakes up. It'll stop fairly consistently 1 - 2 minutes after waking up.
3) Time Machine seems to be busy doing something when the trackpad stops (the little icon is spinning in a circle if I have a Finder window open). Uncertain if it's always doing something or if it's coincidence that I've noticed it more recently.
4) As mentioned above, opening the Bluetooth System Preferences will always get the trackpad to respond, but then it'll stop after a few minutes. Unpairing and reestablishing the pairing will fix the issue for awhile (at the very least until the next time the iMac sleeps).
5) I may be imagining this, but before upgrading to Mavericks, I think it used to show the message that the trackpad was connected when the iMac woke up. I no longer see that message unless I remove the connection and setup the pairing again.Â
I've seen lots of people with various issues with Bluetooth connectivity and Mavericks. I'm on 10.9.4.Â
Info:
iMac, OS X Mavericks (10.9.4), Magic trackpad, Bluetooth
My trackpad is not responding. I have to reboot and then it works for a few minutes then completely stops. Keyboard is fine. I need to use a mouse.
Info:
MacBook Air, OS X Mavericks (10.9.4)
My touch pad will only tap to click. It wont respond to a right click or left click when you actually press down on the pad. Any ideas what may be up? Macbook pro I7.
View 2 Replies View RelatedI've tried two different mice and confirmed it's not the mouse. The interface will not acknowledge a double click for opening windows, etc.
Info:iMac, Mac OS X (10.6.8)
