MacBook Pro :: 15.4 Mid 2012 Stops Responding?
Jun 29, 2012anything i do brings the spinning beach-ball all the time, I already installed lion clean, nothing, still doing it.
Info:
MacBook Pro, Mac OS X (10.7.4)
ADVERTISEMENT
MacBook Pro :: Trackpad Just Randomly Stops Responding
Apr 26, 2012In the last few days I've had a recurring problem: Randomly and without any obvious context in terms of actions, apps etc, my trackpad simply stops responding. I have all options enabled on the trackpad, such as soft click+drag, and the problem has so far only occured when performing that: drop'n drag.
It get's stuck and I cant release whatever I've gripped. I am now only able to use the keyboard and have to reboot to be able to use the trackpad again. After reboot the problem returns randomly after a while. I can't think of any recent software updates or additions that have coincided with the problem, except installing Livedrive Briefcase recently.
The problem however does not specifically occur when working with that (though Livedrive is set to run in the background). The problem occurs more and more often, usually after I have closed the lid (sleep). Also, I am able to use my Magic Trackpad, which in turn brings the build in trackpad back to working!
MBP: 15" 2.4 Ghz Intel Core i5 (dual core) 2010
System: 10.7.3.
HDD: 240 Gb SSD with 91 Gb of free space
Info:
MacBook Pro, Mac OS X (10.7.2), 2.4Ghz i5, 8GB RAM, 240 SSD HD
MacBook Pro :: 13 - Network Interface Stops Responding
Jun 23, 2014I work NOC Support / Operations for a decent sized provider in the midwest-ish area. I configure radios, routers, switches, etc CONSTANTLY. I need an ethernet interface. So I have the ThunderBolt Gig Ethernet adapters. Â
I plug one in every day, running DHCP, no issues. Then I roll it over to a private IP to setup a radio. At this point, the interface is dropping (because I am rebooting the radio over and over), and I have to change the IP on it consistently. After making four to six changes, the interface just stops responding. In the network prefs, its red, as if it doesn't have a good working connection. I open the network anaylizer, and it shows me that the interface is up, with no IP. Â
I've disabled the interface by turning it off, nothing. I have unplugged the adapter and the cable, network anaylizer still shows the port up and negotiated at 100/1000, but theres nothing there...
MacBook :: Keyboard Stops Responding And Then Works After Reboot?
May 2, 2012My computer will start running really slowly and then the keyboard stops working, then after 30 seconds or so I lose the ability to click but the mouse still moves. Command-option-esc for force quit still works some of the time though but refreshing everything from there doesn't help. After I reboot everything goes back to normal. This has happened every other day or so for about a week.
Info:
MacBook, Mac OS X (10.6.8)
MacBook Pro :: Graphics Card Stops Responding On BOOTCAMP?
Jun 15, 2012Since I had to jump through all kinds of hoops of the actual apple support page, I eventually turned to the community now, which as ironically a whole lot easier. Anyways, My problem is basically with BootCamp.I'm trying to run the CryEngine 3 SDK on a late 2011 macbook Pro, and the specs including the graphics card should be enough to handle it easily.Yet everytime I try to launch it, it plays for a little while (2 minutes) then comes up with an error along the lines of "Display driver has stopped responding and has recovered".Â
I've checked and I have the latest drivers for the graphics card on the mac installed including the Catalyst Control Centre porgram. It seems like it should work, but it refuses to.I've read up on it a bit and it may be a problem with overheating, since when the mac beging running the CryEngine the fan starts going like crazy, basically at its maximum capacity, so It might be a problem with Over heating.Â
I've also heard that due to a few compatibility issues with Windows 7, the graphics dont switch properly which leads to this error and can be fixed by entering the windows BIOS and switching the graphics switching from dynamic to fixed, however i'm not sure if I really want to meddle with the BIOS.Â
I've checked both the CPU and the total RAM when running CryEngine however the RAM only gets to around 50% whilst the CPU barely tops 20%. Also the graphics card being a AMD Radeon HD 6770M is something that should be able to handle it.Â
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Using BOOTCAMP Windows 7 64Bit
MacBook Air :: Trackpad Is Not Responding - Have To Reboot And Then It Works For Few Minutes And Completely Stops
Aug 26, 2014My trackpad is not responding. I have to reboot and then it works for a few minutes then completely stops. Keyboard is fine. I need to use a mouse.
Info:
MacBook Air, OS X Mavericks (10.9.4)
OS X :: Keyboard Stops Responding After 10.6.5 Update
Nov 18, 2010I've noticed after upgrading to 10.6.5 that my keyboard will not work when I come back after an extended period of time away from the machine. At first, after applying only the 10.6.5 update, neither keyboard nor mouse would work unless I unplugged and replugged the keyboard (the mouse is connected directly to the KB). Later, I installed the combo update, and then the mouse worked but the keyboard still wouldn't. This is after my display sleeps - as long as I continue to use the computer, everything works fine. I have a mid-2009 Mac Pro 2.66 GHz quad-core (Nahalem) but with the older (clear, G5) keyboard and a mighty mouse.
View 2 Replies View RelatedKeyboard Stops Responding During Osx Server Install 10.5
Mar 3, 2012I just used an OSX Server v 10.5.0 DVD to upgrade a computer (1.6 ghz G5 tower, 1.5GB RAM) from osx 10.3.9 server. When I get to the 'Serial number' panel, none of the fields will accept any keyboard input. The keyboards worked prior to the upgrade. They work fine on another mac. The eject, volume, and caps lock keys all work. Just the fields themselves in the Serial Number (and the registered to, and organization) fields are ignoring input.Â
Info:
iMac, Mac OS X (10.6.8), 3.06 GHz intel core 2 duo, 10GB RAM
Intel Mac :: It Shuts Down Or Stops Responding During Startup
Mar 27, 2012My imac is about 18 months old. Latest software download.Will not start up properly. After the Apple Logo, sign comes up on the screen stating "startup disk is full".
Info:iMac
Mac Pro :: Mouse Stops Responding To Left Click?
Apr 5, 2012I have a macpro 2008 Running Lion. Mouse stops responding to left click. Restart does not always solve. Have reset PRAM and installed a clean updated copy of Lion still regular problem Â
Info:
Mac Pro, Mac OS X (10.7.3), Mouse fails even after reboot. Rese
OS X V10.7 Lion :: Software Update Stops Responding?
Jul 4, 2012I have not been able to update my software in a while
The updatte will get to there and just stop. Doesnt matter how long I leave it there or what I do. Tried a few things but nothing has worked.
Info:
MacBook Pro, Mac OS X (10.7.4)
OS X V10.6 Snow Leopard :: Finder Seems To Be Corrupt / Mouse Stops Responding
Apr 3, 2012I have Mac Intel Base running OS 10.6.8. Finder seems to be corrupt. I have checked the system and it seems to be working properly. However, my Mouse and keyboard stop responding when I relaunch finder, and I have a very slow start up time (10 to 15 minutes till the mouse and keyboard respond). I ran Disk Warrior and got a lot of permission and file errors. Disk Warrior says they are fixed, but every time I run Disk Warrior or Disk Utility the same errors keep showing up. Trying to go to safe mode to check to see if extensions are an issue doesn't work because mouse and keyboard do not respond so I can't log in.
Info:
Mac Pro, Mac OS X (10.6.8)
Recently When Load A Safari Page It Almost Immediately Stops Responding
Apr 5, 2012Just downloaded MacKeeper onto my 2011 MBP. Suddenly when I open safari, every page stops responding almost immediately after loading. The pages load from the bookmarks, so I know that the connection is good. Once a page hangs I can open another page, which then also hangs.
Info:
MacBookPro
OS X V10.6 Snow Leopard :: IMac Shuts Down Or Stops Responding During Startup
Apr 15, 2012I am having trouble starting my 21" iMac running Snow Leopard after I had shared the HD with my MB-Pro. I had removed the "everyone - Read Only" rights on the HD (on the iMac) and opened sharing so my MB could attach to it. Grey Apple Logo and progress circle upon startup now.Can changing these rights cause the system to not boot? I can go into single user mode but I am not sure what to do then.
Info:
iMac, Mac OS X (10.7)
OS X Mavericks :: Microsoft Word Stops Responding When Open A Document?
Sep 10, 2014This has been happening on and off for ages, from half a year to a year. I have been trying to open a document for 4 hours now, it opens it and then freezes, i then have to force quit it and start over again. Some times i have left it for a while others i quit it after it stops responding. It is getting ridiculous now, i have also searched for ages on the internet, some problems are unrelated some seem related but the fixes don't work, I need to get word to stop doing this.Â
I thought maybe it was because it keeps opening all my previous documents that I had open, i unchecked the box so it doesn't reopen windows and it still freezes but on this document instead. I do not have a clue what to do and I urgently need access to these documents, the documents aren't damaged, i was working on them before, and had this problem with many other documents that also weren't damaged. What should I do?
Info:
MacBook, Mac OS X (10.6.7)
OS X Mavericks :: Magic Trackpad Stops Responding On Wakeup After Upgrade?
Sep 11, 2014I have a 27" iMac purchased in July 2011. I never had any issues with the trackpad before upgrading to Mavericks. I upgraded a few months ago and started having sporadic issues with the trackpad. When the iMac woke up, everything seemed fine at first. About once or twice a week, after it had been working for about a minute (just enough time to start web browsing), the trackpad would suddenly stop responding. It then progressed to being more consistent (every other day). The cursor was still visible and the keyboard still worked. The trackpad was still on but apparently not connected. I thought it was the batteries, but new batteries didn't work. I could get the trackpad to work again by using Spotlight to open the Bluetooth System Preferences. The trackpad worked immediately when Bluetooth preferences were opened (nothing needed to be changed; it would just start working).Â
However, it would stop responding after about ten minutes. It was interesting because even if I left the Bluetooth System Preferences open, it would still stop responding after about ten minutes. I could use the keyboard to make the preferences window active and it would immediately work again. It would then work again for a few minutes and then stop. I found that removing the trackpad and re-connecting it would cause the trackpad to start working again more consistently. It would only stop if the iMac went back to sleep for an extended period (overnight). Â
The useful keyboard shortcuts are cmd + spacebar to open Spotlight, type bluetooth, use the arrow keys to go to Bluetooth system preferences (hit enter), use the arrow keys to go down to the trackpad, press spacebar to unconnect, again to confirm, and then after the trackpad is automatically rediscovered, press spacebar again to pair it.Â
This went on for about a month, when I had what I suspect was an unrelated problem. The trackpad started acting as if it was being held down (left click was always being pressed). I took it into the Apple Store and they confirmed it was broken. At that point I had a brand new trackpad. Â
The issue had gone back to happening every other week or so. I thought it might be interference, but I've since physically moved apartments and all the objects around it. It's been a couple months now and it's back to happening every couple of days or so. Since the trackpad is brand new, I have to think this is a software issue. I've noticed the following consistently:Â
1) It only stops responding if I've put it to sleep (I usually do so with a hot corner, but I don't have any reason to believe that's related) and haven't used the computer for more than 12 hours.
2) It'll always work right when it wakes up. It'll stop fairly consistently 1 - 2 minutes after waking up.
3) Time Machine seems to be busy doing something when the trackpad stops (the little icon is spinning in a circle if I have a Finder window open). Uncertain if it's always doing something or if it's coincidence that I've noticed it more recently.
4) As mentioned above, opening the Bluetooth System Preferences will always get the trackpad to respond, but then it'll stop after a few minutes. Unpairing and reestablishing the pairing will fix the issue for awhile (at the very least until the next time the iMac sleeps).
5) I may be imagining this, but before upgrading to Mavericks, I think it used to show the message that the trackpad was connected when the iMac woke up. I no longer see that message unless I remove the connection and setup the pairing again.Â
I've seen lots of people with various issues with Bluetooth connectivity and Mavericks. I'm on 10.9.4.Â
Info:
iMac, OS X Mavericks (10.9.4), Magic trackpad, Bluetooth
OS X V10.7 Lion :: Gestures Stop Working, Lion 'freezes', NFS Server Stops Responding
May 6, 20121. Lion's (10.7.3) user interface becomes nonresponsive/'freezes': trackpad cursor moves, keyboard can be used for typing, BUT gestures stop working and "Dock" is not responding (it is hidden automatically).Â
2. Tere are frequent "nfs server localhost:/5pBJvp-jULTJrbfF3Hpvc5: not responding nfs server localhost:/5pBJvp-jULTJrbfF3Hpvc5: is alive again" error messages in Terminal while I am running 'find' command.
These error messages seem to be correlated witth the user interface 'freezes'.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
OS X :: Command+tab Switching Stops Functioning / Shortcuts Stops Working
Nov 22, 2009On a day-to-day basis I run: Adobe PS, INDD, and AI, Microsoft Entourage, Firefox and iTunes. Just recently, after an upgrade to Leopard, I added Things and Simplify Media to the list.The problem that happens before (on Tiger) and now (on Leopard) is command+tab switching stops functioning and Expose hot corners and shortcuts stop working.
I'm pretty sure this isn't a Finder crash because before, on Tiger, I could quit+restart Firefox and everything would be back to normal. Almost as if some shortcut had causes the system to act differently or there was some app dissonance?
But now, with Leopard, nothing I quit will cause these two features to act properly until I do a restart. Both features (command+tab switching and expose) are very necessary for my work flow. I have checked SysPref to make sure keyboard shortcuts are default and Univeral Access to make sure assisted devices is turned off.
OS X :: Computer Stops Charging / Switched Powerpack But Again Stops Charging
Nov 16, 2010I got my computer yesterday, it's a iBook G4 OS X 10.5.8. The charger worked fine until around six o' clock. Then it wouldn't charge. We switched the power pack and it worked for an hour or so, and then the same thing. What can I do? I CANNOT take it to be fixed.
View 4 Replies View RelatedMacBook Pro :: Does 2012 Come With Install CD
Mar 9, 2012I had it repaired at the mac store and iphoto and imovie are missing, probably along with some other applications. I've tried looking for the install cd for it but I can't find it, now I'm starting to wonder if it even had one. If it doesn't, can I go back to the apple store and have them re-install my programs?
Info:
MacBookPro
MacBook Air :: When Are 2012 Air's Due To Be Released
Mar 20, 2012I want to buy an Air but I do not want to buy one only to have the new one be released a few months late.
Info:
MacBook Air
MacBook Air :: Way To Reset 2012
Mar 28, 2012So I just bought my first Mac and I bought it as a open box. When i turned it on the Word was in spanish but everything else in English, and whoever had this laptop before me still has it registered to them (I'm guessing). I need to know how to reset it. I want it to be like i bought it brand new and not have anything that the person before me had on it.
Info:MacBook Air
MacBook Pro :: 2012 Seems To Keep Freezing?
Apr 18, 2012I bought my Mac a little over a month ago and I'm really not impressed with it. I keep seeing the little rainbow wheel all the time. When I try to load a YouTube video the whole machine just stops working and becomes unresponsive for about 4-5 seconds. Also, when flicking between tabs on Safari it intimitantly becomes unresponsive. I don't do any heavy power consuming things on my mac. It's basically just for college and recently all I've been doing is using Safari, Spotify and Bittorent. I don't know what I should do. Whether to take it back to Apple or just deal with it. My old Acer laptop was fine dealing with this sort of stuff so I'm really unsure. I feel quite let down although I am a total apple fanboy. Â
Info:
MacBook Pro, Mac OS X (10.7.3)
MacBook Pro :: Hit The PrtSc Key On 2012?
May 31, 2012I'm using VNC onto windows PC that has an application requiring me to use the PRTSC to start a recorder , but I can't find a combination of keys for PRTSC. I'm using a MacBookPro 2012 and REALVNC onto a windows 2008 server using a recording package. To start the recorder I need to hit PRTSC - How do this on my Mac so it hits a PRTSC on the remote PC? ? Â
Info:
MacBook Pro, Mac OS X (10.7.4)
MacBook Pro :: Beside RAM, Can Upgrade The Hardware's Of Mid-2012?
Feb 23, 2012I have a 13" Macbook Pro (mid-2010). I know that the RAM can be upgraded by just adding RAM to it. How about other hardwares like processor, harddrive, or battery? Can I upgrade it through Apple?
Info:
MacBook Pro, Mac OS X (10.7.3)
MacBook Pro :: Getting Quick-books For 2012?
May 17, 2012Can anyone recommend a simple accounting program that works on Mac? Quickbooks for Mac 12 is way too complicated for my needs.
Info:
iMac, Mac OS X (10.6.7)
MacBook :: Work Like A 2012 Model?
May 24, 2012I got my macbook in early 2011, is there any way I can update it to have the new features as the 2012 model?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
MacBook Pro :: Can It Work Like A 2012 Model
May 24, 2012I got my macbook in early 2011, is there any way I can update it to have the new features as the 2012 model?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8)
MacBook Pro :: Sims 3 Won't Load On 2012
Jun 7, 2012I recently just got a new MacBook Pro and I had my Sims 3 game from when it first came out.However, the game isn't being recognized by the computer. The case shows that the game is compatible with Windows and Mac. I heard if you install to Windows you can't install to Mac right?
Info:MacBookPro
MacBook Pro :: Bootcamp On 2012 Or Windows Pc?
Jun 13, 2012I am between two laptops, the MBP 15 with retina display and i7 2.7ghz(third generation) and a dell precission m4600 with 2.7(second generation).Same other specs. 8gb ram, ssd, the difference are the gpu, geforce 650M, and the precission has a quadro2000.I will use windows almost the hole time, cause of CAD, and other win programs. But I will be only using 2d cad drawings mainly, so I believe I dont need a quadro. In addition, I want to be able to play some games, like wow or diablo3.So I will need bootcamp. The performance of windows on bootcamp, will be the same as a windows pc native? I read some issues with the wifi, is it true are there other issues? I believe i will have two partition of 512/2 gb for each OS
Info:
MacBook Pro
