I have just bought this macbook pro,and i would like to play wow.I heard that the performance is better if you use bootcamp ,but is it a huge difference?I can use windows,but if wow runs on mac os,then i would not like to use bootcamp. I do not really need Ultra settings,but I would like to go for good/high with 45+ fps.nother question. I read about GPU overclocking... Is it only available when you use Boot Camp?
View 6 RepliesThere were many reports of not being able to install any Windows OS using bootcamp with latest MBP 13" (2010, nVidia 320M) and Intel X-25M SSD combination (installer just wouldn't recognize the drive at all).I haven't heard about this problem for a while. But I'm still not sure about whether it's safe to go with X-25M or not.
View 6 Replies View RelatedI recently purchased the 13'' mbp (well my parents bought it for me because i was qualified for commercial pilot training in my country) and well besides the rough edges that hurt your wrists, I love my macbook pro, I love the interface, I love the design + the holy track pad (!) but as soon as I install boot camp things turned ugly, real uglyAfter struggling to install Windows 7 Home Premimum 64 bit's Drivers (It took me a long time to set windows to regconize that I need 64 bit drivers and not 32's) I grow more and more frustrated with the supplied drivers, it's horrible, the windows would frequently freeze and requires a shutdown. (I presume there's a problem with the NVDIA 320M driver). Another problem is that for some odd reason there's no fan running at all during windows operation! And yes I'm aware of the smrcfan restart thingy to transfer the setting over to windows but that is just so incovenient (sorry if i'm being a wuss).
Now I would love to hear feedback from experienced users how on earth can I find a subsitute graphics driver to fix this frequent freezing + a way to start the fans.
My config: 2.66Ghz 4GB DDR3 RAM + 320M GF
Windows HP 64 bit Boot Camp 3.1
I just got my mac today, I tried to install windows 7 via bootcamp and it installs but then when it reboots the screen turns off and nothing happens...I wait and wait and the screen stays black until I reboot the computer and hold option to boot osx. Its windows 7 prop 64bit and it wont boot into windows at all, the display will show something if I try to boot in safe mode but it only gets as far as setting up for first use and then pops up an error saying you cant do that in safe mode
View 3 Replies View RelatedI have purchase a clone optibay from ebay. Installed it and everything worked like a charm and regonized by the Mac. However, I am unable to install boot camp with my USB external DVD drive. I also tried partitioning my flash drive and install from flash..but I can't seem to get it working.
View 4 Replies View RelatedI've got my MSDN W7x64 Ultimate DVD burned, and when I reboot to install it (after using Boot Camp Assistant) it always hangs and never brings up the graphical installation screen. I tried Safe Mode, only to see that it stops after disk.sys loads. Anyone else having this issue or found a way to fix it?
View 2 Replies View RelatedIn retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
My mid 2010 iMac i7 will not boot past the apple logo? I'm running 10.7.3. I have tried restoring from TM backup from recovery mode (worked the last time this happened) however upon completion it returns to the recovery screen? I made a disk of Lion when I downloaded the first time (followed same instructions sourced from numerous websites) which does not seem to work when i set to start up from this disk, just gets to the grey screen and flicks between the apple logo, a folder icon with a question mark and the circle with line through? Now I can't eject the disk either, a message appears that system can't eject and to make sure all applications are closed? Not sure how to go about closing these applications without being able to start the system? When I tried booting from the Macintosh HD I got a message that the boot cache partition was faulty? I have ran disk permissions etc all ok. Â
Info:
iMac, Mac OS X (10.7.3)
Is it possible to boot from an external Firewire DVD Drive? It certainly isnt from an external USB DVD. Real answers only please, not "I think so" ones based on HDDs or rumours you may have heard!...
Background:
I've got an MCE Optibay in my Mid-2010 i7 MBP. When installing Bootcamp it refuses to install from the external USB DVD drive. In the end I pulled the 2nd HDD out and reconnected the internal DVD. It then worked fine without a hitch. Then I reinstalled the 2nd HDD and all was fine for a few days.
Now I want to resize my Win7 partition (bigger, as MS Visual Studio's bigger than I thought, and I might stick some games on). I can shrink the OSX partition fine with Disk Utility, but windows won't grow the Win7 one because the empty space is before the Win7 partition, not after it. Apparently this can be done with GParted. Guess what? I can't boot the Linux based GParted CDROM from the external USB DVD drive! So, will a Firewire one work where USB fails, and solve my alternative OS booting issues? If I buy one I can then either use GParted, or delete the Win7 partition and start again without having to pull the laptop to bits all over again, only to put it back once I'm done, and possibly have the same issues in the future. Obviously I don't want to blow extra money getting a Firewire DVD drive though if it's a waste of money...
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
Is there a way to make the Boot Camp menu the default boot screen, as opposed to holding Alt? This is the latest SL release, if that matters.
I know this is possible in some manner, our networked iMacs all do it; they start up and give the option to boot OS X or Windows, with a countdown to boot the default OS. I'd just like the same thing to happen on my MBP.
I have done some research on triple boot systems, and it appears that a third OS must be run virtually, but all the information I came across was a few years old. Microsoft is running a deal right now on Windows 7 for students so I would like to pick up a copy and try it out.
Is it possible to run 3 operating systems through Boot Camp 3.0? I am not interested in running a virtual OS.
Current Setup:
13" macbook pro
Snow Leopard and Windows XP through Boot Camp
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
View 3 Replies View RelatedHave the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
efiboot loaded from device: Acpi(PNP0A03,0)/Pci(1|1)/Ata(Primary,Master)/HD(Part 2,Sig********-****-****-****-************)
boot file path: SystemLibraryCoreServicesoot.efi
.Loading 'mach_kernel'...
................................................................................
I want to install XP using Boot Camp but when I run the Boot Camp Assistant I get the following message
Boot Camp Assistant can not be used
You must update your computer's Boot ROM firmware before using this setup assistant.
Now I have tried all firmware updates available on apple site but they say they are not needed, I'm on 10.5.6 and a friend of mine with same firmware runs his boot camp comfortably.
My Boot ROM Version:MB21.00A5.B07
SMC Version:1.17f0
I just installed Windows XP to a Boot Camp Partition on my MBP. However, rebooting is a hassle and naturally I want to avoid doing such as often as possible. I think running Parallels Desktop would suit my needs quite well. But here's the catch: I want to be able to use one partition to serve both of those needs. In other words I want have the option of booting through both Boot Camp or Parallels.
How would I go about doing this? I already have a XP installed via Boot Camp. So if there is a method where I don't have to reinstall, great, but I am fine with deleting stuff.
I'm using MacBook Pro 13" Late 2011 with 256gb SSD & OSX Lionafter I install boot camp + Windows 7 Professional when i restart to boot OSX it have blinking folder with question mark I've try using Option button to select drive but it have only internet recovery
Info:
MacBook
Pro, Mac OS X (10.7.4)
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
Anyone else had trouble option booting with a 2010 Mac Pro? Can't get to startup manager. All I get is a blank screen. Apple says it must be a hardware problem after having me test everything else. Keyboard checks out. Can boot from install disk holding C key, but cannot change startup disk with prefs to install dvd or to a cloned drive. Have reinstalled SL 10.6.4 from install disk. Zapped pram and unplugged power, held power button 5-10 secs. and plugged in again - to reset computer according to apple tech.
View 2 Replies View RelatedI got a 13' Macbook pro, after a kernal panic, the computer stuck at the same page: u need to restart your computer. Later i run restore disk, but is seems cant find my hhd. Most likely i need to chaneg a new HHD?? I tried to search on apple website how much is the HHD but cant find any info. Is there one had same problem and got their HHD changed? Should I fix it thru apple or should i get the HHD myself and find someone to put it in for me? I am out of warranty.
Info:
MacBook Pro
I've been hearing good things about the Spinpoint Drives and the 750GB ones are coming down in price.Here is my current setup1 - 500MB Drive - Leopard2 - 320MB Drive - Vista 643 - 500MB Drive - FAT32 (Shared, Irrelevant)I plan on replacing drives 1 and 2 with 750GB Spinpoint drives.My question is, can I boot off of the Leopard dvd and put in Drive 1 and NewDrive1 and just clone it, and do the same for Drive2 and NewDrive2 and clone it? And then go into Leopard and resize the HFS partition, and go into Vista and resize the NTFS partition?
View 2 Replies View RelatedI am trying to install Windows 7 Ultimate onto my Mac Mini using Boot Camp Assistant. On the Windows 7 install it reboots three times. On the third time, it boots to black screen with "Press any key to boot from CD or DVD...." When I try to hit any key on my Apple Wireless Keyboard, it does nothing. Same thing when I hook up a wired USB HP keyboard to the mini. It is entirely unresponsive. I have tried letting it run for a while to see if it would move on. I have tried changing the startup disk in Mac OS X to the Windows partition but I get nothing but a blank black screen with a flashing underscore.
View 3 Replies View RelatedI have a Dell Reinstallation DVD with Windows Vista Business 32BIT SP1. The DVD is supposed to be pre-activated to reinstall Windows. I recently used it to reinstall Windows on my Dell laptop and I was wondering if the same disk could work to boot a Windows installation from my Mac (via Boot Camp). I'm barely using all of my hard drive space so I may want to do this in the future.
I'm using an iMac under Mac OS X Version 10.6 (Snow Leopard)
my Macbook Pro doesn't boot after updating the EFI, I just updated and restarted as it says in the description of the update and then it does not boot, making 4 short beeps and then 4 longer, I don't know what's happening. There was no problem during the update (no problem with electricity or similar)
Info:
MacBook Pro, Mac OS X (10.7.1)
Unable to safeboot a 17" mid 2010 MBP?
Info:
MacBook Pro, Mac OS X (10.7.3), MBP 2.6GHz,6GB ram,500GB Seagate HD
My Air (2010, OS X) takes 2 hrs to boot. No peripherals, 4 GB unused. After booting the cursor is active but any action (eg opening app) results into beachball. Restart takes another 2hrs.
Info:
MacBook Air
I have a 2010 mac book i'm trying to zero out. But it will not boot to target mode connected t my mac book pro via fire wire 800 ( im using a thunder bolt>firewire 800 adapter)
View 2 Replies View RelatedIt seems to stuck in Clamshell mode? External Display, Keyboard, Power -> MBP working!
But without it's just sleeping. Internal display isn't detected then. Have installied 10.7.3 Lion + All EFI Upgrades.
Zapping PRAM and SMC had no effect. Also deleting the power management prefs using single user mode had no effect. I am able to wake it up for short without external display - but 5-10 secs later it is sleeping again.Â
I orderd 8 gig's of RAM from Apple. Installed it per the instructions. Now, the MBP with Lion boots up and runs fine from off, the activity monitor acknowledges the 8 gig's. Runs well.
When I close it and then open it back up, the screen stays black and the sleep light goes out.Also, sometimes it won't boot, the light blinks and it makes a beeping noise over and over until I do a hard shutdown. Also, a couple of times, I was using it and the graphics went totally screwy and were blinking and whatnot until I did a hard shut down. Can I return the memory (a shame because it is better with it when it works). Software Mac OS X Server Lion 10.7.3 (11D50)Graphics Intel HD Graphics 288 MBMemory 8 GB 1067 MHz DDR3Processor 2.53 GHz Intel Core i517-inch, Mid 2010
Info:MacBook Pro (17-inch Mid 2010), Mac OS X (10.7.3)
