My Imac has the dreaded blue screen on start up. To avoid this, I unplug the machine each night which solves the problem. I have contacted an Apple service rep who says I need to replace the hard drive. Nothing I have read indicates this. I have not added new hardware, not changed anything. Could it be my hard drive is bad?
Info:
iMac, Mac OS X (10.5.8)
Any one seen this before? When booting, the iMac goes to a blue screen that simply says "maintenance".
View 2 Replies View RelatedI have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
My friends alu intel imac is having a problem. When he power on the machine the computer gets stuck on a blue screen.
View 21 Replies View RelatedAfter updating the mac os and other applications that displayed in the update software notification, some of my apps wouldn’t open or start up. The icon would bounce in the sidebar like it was trying to open but then a crash report would display. Then last night, I started up the computer to find that it loaded the blue screen of death. I tried to load in safe user mode, but it only loads the different background, but no apps or finder displays. I also tried to load the OS disk that was provided at the time of purchase, but am not sure if i am doing that correctly. I can't seem to get past the blue screen.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
Can't get rid of blue screen at startup
Info:
eMac (2005), Mac OS X (10.4.11), Not sure if 2004 or 2005?
I have MacBook Pro Late 2011.
I don't know if it's a problem or it's a normal. But i've noticed that when I boot up the macbook, just before the login screen appears, i can see the blue screen for few seconds. Must there be a blue screen?
Info:
MacBook Pro, Mac OS X (10.7.3), 15-inch: 2.2 GHz
I have been having issues with my two year old MacBook Pro for a while. I have replaced two hard drives and I am now having time out problems. I have just started the computer and all I get is a blue screen.
Info:MacBook Pro (15-inch 2.53 GHz), Mac OS X (10.6.3)
When starting up my MacBook Pro normally, I get a flashing blue screen followd by static. I can hear the volume clicking as I change it and change the brightness of the keyboard, but nothing else responds. I have tried:resetting PRAM booting from Snow Leopard disc (didn't work)booting into safe mode and repairing permissions, disksending computer into Apple (hard drive was replaced)reinstalling Snow Leopard from safe mode (bricked computer; had to send to Apple)
View 6 Replies View RelatedWhen I turn my MacBook on it does the white screen with the spinning wheel and then goes to the blue screen but it gets stuck on that screen for about a minute or two and goes to my login in screen any idea whats going on with it i have not changed anything but the other day I was turning it on and there was a bug on the keyboard and I went to kill it causing my to press some random buttons during the start up and its been doing this ever since.
View 5 Replies View RelatedI just picked up a Mini display port to DVI adapter for my Macbook Pro so that I could hook it up to my 32 inch 1080p tv that I use as my main desktop monitor. It works just great in OSX (though for some odd reason I have to put the laptop to sleep then plug it in for it to work correctly. Can't be on or off otherwise I don't get the full picture not sure why) but in bootcamp it instantly causes a blue screen. If I plug it in then reboot to windows I get a blue screen even before its loaded windows all the way. I assume this is a driver issue but I'm using the latest boot camp drivers.
View 3 Replies View RelatedI have an iMac Intel Dual Core 2GHz/20"/667MHz, and it will not properly startup. Blue screen problems.It looks normal at first (gray splash screen, then blue, then Apple info/nameplate box with progress bar), but when the desktop is about to finally appear, it blanks back to a blue screen for a few seconds, then back to the desktop trying to mount-- repeats over and over.It appears to make some progress each time (top menu bar items start to show up after the first few blue blank-outs, font management app is launched, etc.) but it repeatedly goes back to the blue screen and never finishes.
View 3 Replies View RelatedAt start-up I see a blue screen for some 4-6 minutes delaying the start-up of my new (Nov-2009) iMac; I have installed the latest OS version.
View 1 Replies View RelatedI have a macbook: model - A1342 its a 2009 machine. On start up it is giving a blue screen and I am unable to do anything on the machine. I know my hard drive is pretty full and I'm trying to use an external to pull stuff off to clear up some space. Its been blue screen on me for at least fifteen minutes. I don't know the OS I'm using since I can't boot up the machine to find out.
Info:
MacBook, Mac OS X (10.4.6)
macbook recently took a trip to the dashbord of the car while getting re-ended in the passenger seat.
It still runs!! But sometimes boots slowly at the blue screen where the progress bar is displayed. Never freezes up but very slow.
Info:
MacBook, Mac OS X (10.6.8), 2.16 GHz Intel Core 2 Duo - 2GB Ram
Starting my MacBook Pro running Mavericks gives me a 'Blue Screen'.
Starting using Cmd-R does not give me the option to use Internet Recovery and eventually gives a 'blue screen' (sometimes grey)
Starting using Opt gives me the choice of 'Macintosh HD' and 'Recovery-10.9.3' - both choices give me a blue (or grey) screen
Starting using 'Shift' displays a progress bar, which completes, and then gives a 'blue screen' (sometimes grey)
Starting using Cmd-S gives me a :/ root# prompt
After running fsck -fy twice I get the message: '** The volume Macintosh HD appears to be OK.'
typing 'exit' to attempt a re-boot gives a 'blue screen' (sometimes grey)
I have tried resetting NVRAM and PRAM
I have tried resetting SMC
Info:
MacBook Pro, Mac OS X (10.6.6)
I have an '07 MacBook Pro running 10.5 I was on the desktop and I did a 'Command I' click on the MacHD icon to see what memory was being used and how much was available. While the window was open which displayed the memory, I scrolled to the bottom to the sharing and permissions portion and where it had the everyone box - changed the permissions to 'no access'I then logged out and shut the machine down. Now I try to start up and all i get is the blue screen with the spinning gear. I have tried to start with the shift key down, no luck. I tried with the startup disk and holding the c key then went to disk utility and did the disk repair which came back OK but the disk permission keep failing due to error of underlying task.
View 2 Replies View RelatedI just want to say thanks apple for being a piece of **** machine. I have the first macbook 1.83 ghZ 2gb (that I bought from crucial) intel core duo. The problems I have had:-Battery not charging (70? replacement because I had no more warranty)-Burnt and melted charger (also expensive)-And now the problem is unknown all I know it will not start.-Faulty Macbook Air -After the second Macbook Air the charger would not work.I mean you would think that so much money for slow computers would get you reliabilit
View 7 Replies View RelatedI am trying to fix my cousin's macbook pro that she got for free. She only has the laptop and nothing else for it and it's about two years old. Wen I try to start it up I either choose the wireless network or login. After both of those things I get to the blue screen and that's it, or I get to the background with nothing else on the screen. I've tried doing safe boot and it still does nothing.
View 3 Replies View RelatedMy g4 ibook gets stuck on the grey start-up screen, with the spinning wheel, and then goes to a blank blue screen.When I try to perform a disk repair in safety mode, it gives me the following feedback
View 1 Replies View RelatedA few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.
Info:MacBookPro, Mac OS X (10.7.3), blue screen
just using my new MBP today and twice when turning it on it started to boot up and got as far as the blue screen (just before the desktop pic and stayed there.Is this normal sometimes?
View 1 Replies View RelatedI had a presentation today, and plugged my MacBook Pro ('06 version, and 10.4.10) laptop into a projector. Right as I did that, things went a little crazy, the audio was coming out with hissing, it was running very slow, and overall just went from running great to disfunctional. It finally froze, and I shut it off. A couple of hours later, I'm failing to get past the blue screen during the start-up. When i run in safe mode, its just shuts off while i'm holding the shift key
View 1 Replies View RelatedOS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
View 6 Replies View RelatedI just installed an update on my macbook, but once it completed, it got stuck at the blue loading screen with the swirling thing for more than 10 minutes (I started to pay attention when I noticed it hadn't booted up faster, so I'm not exactly sure how long it took). It eventually restarted itself though. It's happened once before, but I did what I use to do on my old windows laptop and just held down the power button until it powered off, let it sit for a little bit, and then booted it back up. It worked just fine.
My question is, is anyone else having this problem and is there a fix? Is this something I need to be worried about? Did I somehow mess something up by powering it down and back up before? Forgot to mention what macbook pro it is (if it matters). 15in MBP, OS X 10.6.4, 2.4GHz Intel core i5, 4G RAM...
I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
Info:
iMac, Mac OS X (10.6.8)
I recently updated to snow leopard and now I get blue screen on start-up.
I manage to get to enter my password and then to my desktop for a few seconds before it flicks back to my login.
I tried using disk utility from the install disc and it said HD appears to be ok. But it hasn't solved the problem.
Info:
MacBook Pro, Mac OS X (10.6.7)
some reason my Macbook Pro 15' inch won't start up. It's stuck at the blue loading screen after the gray Apple. The screen switches from two blue colors every 5 seconds or so along with a loading symbol. Sometimes I can see my mouse and use it, but that's all what is happening. The last thing I did was installing the newest video driver on my Boot Camp. (Windows 7 - 32bit and Leopard 10.5 for mac)
I can still start up Windows 7 without a problem on Boot Camp, so it doesn't seems a hardware issue. I already tried some stuff found on the internet, but I can't start up 10.5 in normal or safe mode.
My friend updated her 13" Black MacBook yesterday, specifically the "Digital Camera Raw Compatibility Update 2.3". After a reboot, she got the Apple "Blue Screen of Death", with no login window showing. Looking at system.log, there's a section that looks to be the culprit (this began after restarting due to the install of the update):
Nov 7 13:55:29 Philbert /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]: Login Window Application Started
Nov 7 13:55:30 Philbert /usr/sbin/ocspd[53]: starting
Nov 7 13:55:35 Philbert kernel[0]: display: Not usable
Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer[50]): Exited abnormally: Hangup
Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 6 seconds
Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer[64]): Exited abnormally: Hangup
Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer[67]): Exited abnormally: Hangup
Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
Nov 7 13:56:02 Philbert com.apple.launchd[1] (com.apple.WindowServer[70]): Exited abnormally: Hangup
Here are some things I've observed/tried, many from sources via the Internet:
- I'm able to login in single-user mode
- I'm not able to login in Safe Mode (hangs on white screen with Apple logo)
- I've tried booting off the 10.5 install DVD and running Disk Utility - verify/repair disk, this comes back ok. However, if I try to verify/repair permissions, it runs for about 10 - 20 mins then freezes. I let the frozen process run overnight (10-12 hours) and no feedback. I can move the mouse, but I cannot select anything.
- When the laptop is booted and on the blue screen, I can connect to it via AFP
- I've tried manually changing the permissions of "/", by doing - chmod 775 /; chmod 1775 /;
- I've tried removing the com.apple.WindowServer.plist and com.apple.loginscreen.plist files in case they were corrupted by the update
- I tried running the "installer" command to re-install the update package from the command line. I run it with the "verbose" flags, I get no output and the process hangs.
Since I can connect via AFP I figure I'll be backing the data up and re-installing OS X. Pretty lame though, considering this failure was caused by running a Software Update. Anyone have a last minute suggestion for me before I go down that path?I've attached the full system.log.
I downloaded a program that cleans unused files and unneeded files. Apparently it erased some kind of startup files or something cause I shut the computer down one night and the next morning I went to turn it on and it just goes to the blue screen and the loading icon comes on for 5 minutes. It is a Macbook and after sitting there for 5 minutes it just shuts down and tries to start up again. I don't know what I have to do to restore it cause it removed my thingy called "Matt" which is I guess my hard drive name. I'm not every good with computers so I dont know all the names for things.
View 4 Replies View Related
