Intel Mac :: Set Up Closed Circuit Video With 2005?
Mar 26, 2012I want to carry video from one room to another and use the IMAC as the screen. What will I need to purchase to do that?
Info:iMac
ADVERTISEMENT
PowerPC :: Clamshell IBook External Video While Closed?
Oct 7, 2006is it possible to have a closed iBook clamshell with an external video adapter?
View 3 Replies View RelatedMacBook Pro :: Running Video Converting Program With Lid Closed?
Jun 21, 2010I just got a MBP 13" and I want to run some video converting programs while the lid is closed (I don't like the idea of leaving my laptop's screen open at night) but I can't disable sleep mode while the lid is closed.
View 9 Replies View RelatedIMac :: Bad Circuit Board After Hard Drive Failure?
Sep 21, 2010Have an early 20" iMac G5 and the Hard drive started to squeal and then crashed. Tested dive in another iMac and it is definitely bad. Installed new hard drive and the system fails to find it. Formatted it on the other iMac and reinstalled but it still is not seen by the system. Everything was running very well until the drive failure. Took it to an Apple approved store, paid the $60 to be told that the Mother Board was bad. It is hard for me to believe that a disk failure could cause a Mother board failure. 2- 20" iMacs, a 24" iMac, and a new 27" iMac (not yet out of the box.)
View 1 Replies View RelatedPowerPC :: Bad Power Supply, MDD G4 Trips APC Overload Circuit?
Aug 30, 2009I recently fired up a old MDD G4 at work, and after 5 seconds or so, the APC unit that it was connected to started warning that there was a current overload, and killed the power port. I plugged in another computer to make sure that it wasn't a general overload, and it ran fine, so it's a problem with the MDD. The power supply area smelled a little different, and it was hot. The system powers on completely (fans, hard drive, etc.), but it just trips the overload circuit by drawing too much power. Is there a way to take apart the PSU and see what's going on?
View 15 Replies View RelatedMacBook Pro :: Audio And Video Via HDMI To External Monitor With Lid Closed
Sep 12, 2014I would like to run a Macbook Pro Retina (2014) with the lid closed and all video and audio via HDMI routed to an external monitor (Samsung Syncmaster from 2010). Is this possible? When I try this, no sound is transferred to the external monitor and I cannot operate the Macbook Pro with the lid closed. As soon as I close the lid, it cuts the signal to the external screen.  I’ve tried looking for previous posts but they’re about MCP’s connecting via Thunderbolt or DVI.
Info:
MacBook Pro (Retina, 13-inch, Mid 2014), OS X Mavericks (10.9.4), 16Gb, 256Gb SSD
Intel Mac :: Can Transfer Data From Quicken For Windows 2005 To Quicken Essentials For It
Feb 2, 2012Can I transfer data from quicken for windows 2005 to quicken essentials for mac os lion, and how?
View 2 Replies View RelatedIntel Mac :: VNC Connections Closed Unexpectedly
Jun 1, 2012After some of the latest upgrades in OS X Lion when computer goes into sleep mode some connections doesn't work properly. Web Server, SSH, mail server (if any) work fine but it is impossible to remote control the computer via VNC. When trying to connect to the computer once in sleep mode with VNC viewer or similar and after the user and password submmision you get the "The connection closed unexpectedly" error and it's only possible to remotely connect to the computer when manually wake up the machine, making useless the remote control service.
Info:iMac, Mac OS X (10.7.4)
Intel Mac :: Have A Window Open On Desktop Which Can't Be Closed
Mar 15, 2012I have a long narrow window (about 1/2 inch high and 11 inches long) (black background with white lettering) in the middle of my desktop. the word "eject" is located on the lefthand side. I can't remove the window or move it. And don't know how it got there. How do I get rid of it.
Info:
iMac, Mac OS X (10.7.3)
Intel Mac :: Safari Window Closed In Error?
Apr 12, 2012My wife registered my daughter for a school admission process online. We received a confirmation in a safari window and it said we need to print it. But then my mom closed that window in error. Now that program registration is full. Is there anyway I can retrieve that window. It is really important for us as a family.Â
I have an iMac with the latest Lion OSX. Will that page be saved somewherein the temporary files or cache? I also have full time machine backup.Â
Info:
iMac, Mac OS X (10.6.7)
MacBook Pro :: Use Computer In Closed Clam-shell (display Closed) Mode With An External Display?
Jun 4, 2012I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).Â
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).Â
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
Intel Mac :: Safari Unable To Be Closed - Quit Option Grayed Out
May 28, 2012Unable to close Safari at the drop down menu because Quit Safari is greyed out. When I right click on the icon in the tray and click on Quit, nothing happens. Therefore, I cannot restart or shut down this computer.
Info:
iMac, Mac OS X (10.7.4)
MacBook Pro :: Use Computer In Closed Clamshell (display Closed) Mode With An External Display?
Jun 24, 2012I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
IBook :: Put SSD In 2005 G4?
Jun 28, 2014can I put a ssd in a 2005 ibook g4
View 12 Replies View RelatedIMac (Intel) :: Since Installing Yosemite Get Notice On Screen Safari Closed Unexpectedly
Dec 2, 2014I get a notice on screen after finishing and closing Safari to tell me that Safari Closed unexpectedly - how can I stop this?
Example here :
Info:
MacBook Pro, Mac OS X (10.6.4), Projector is a Panasonic PT-LC50E
Hardware :: 2005 IMac G5 Shutdown Itself
Mar 31, 2009I am having some problems with this computer. Suddenly shuts itself off I have had trouble turning it back on. At times I try unplugging the power cord (both ways), and any peripherals (USB, Firewire). Sometimes it works and other times no. I pretty much have to play around with it - but right now I can't turn it back on! In case some are wondering, it is running Tiger, 1 GB of RAM, and I keep it running pretty much around the clock.
View 4 Replies View RelatedOS X :: 2005 Imac - Only Boots To Logo
Jan 15, 2011I just bought it for 100$ no software not even a keyboard I have it networked with my pc is there a way I can get in there or install linux since osx seems not to work
View 18 Replies View RelatedPower Mac :: G5 (late 2005) AHT Required?
May 1, 2012Does anyone know where I can obtain a AHT for this Mac? (Power Mac G5 late 2005 ). From what I've read, I seem to need the 2.5.2 version.Â
Info:
PowerMac, Mac OS X (10.5.8), Dual 2Ghz, 60GB HHD, 4GB DDR SDRAM
Power Mac G5 :: Fastest Card For Early 2005
Dec 5, 2007Since I updated to Leopard, some of my video and slideshow programs are lagging on screen. I have done a pretty good search on the forums here, but am getting some contradicting info. What is the fastest video card for my early 2005 G5 dual 2.0 with AGP 8x slot? ATI RADEON X800 Mac Edition Nvidia GeForce 6800 Ultra (what is the difference between the NVIDIA and the BFG cards?) I have an ATI Radeon 9650 with 256MB one single link and one dual link DVI. The ATI RADEON X800 Mac Edition has one ADC and one dual link DVI? Do both of those ports support a 30" Cinema HD display? My 9650 only supports one and it is in the 2nd port so it is annoying having my 23" be my main monitor and the 30" be the secondary.
Information:
G5 Dual 2.0 (early 2005) 3GB RAM ATI Radeon 9650 30" and 23" Cinema HD, Macbook Pro 2 GB RAM
Mac OS X (10.5.1)
Applications :: Import 2005 Mp3s On CD ROM Into ITunes 10.0
Sep 20, 2010I have a bunch of mp3s on a CD-ROM I burned in 2005. I want to import them into iTunes 10.0. How do I do it?
View 1 Replies View RelatedPowerPC :: G5 2.5 DP Early 2005 ... Possible Kernal Panic
Dec 27, 2010I am having serious issues with my Apple PowerPC G5.. Its the 2.5 Dual Processor version of early 2005 running os x 10.5.8, i have installed; 2x500gb hds along with 4.5gb of ram... Ok now heres the problem, yesterday i came across an app called "CHUD" this apparantly was developed to help speed up an OS X system, so i downlaoded and began to install the parts to the app suite, after installing 1 or 2 of the CHUD apps i came to Reggie SE, i doubled clicked on the install then my G5 decided to freeze, completley! I tried Force Quit and nothing happended, the system would not respond what so ever, so i left it for 30mins or so to see if it would figure itself out and it didnt so i had no alternative but to cut the power and reboot....
Now, after reboot, my G5 will boot up to the User login dialogue, once i enter my password the dialogue accepts my password and dissapears (astho it is logging into my account) but then the screen turns Blue and the system returns to the Username & Password dialogue box..... Also the fans within my system begin to speed up and dont stop for a while, almost sounds like my G5 Tower is about to take off!
Windows On Mac :: Installing MS Visual Basic 2005
Jan 24, 2008I have a macbook running leopard 10.5.1 i installed CrossOver to install a couple .exe programs i needed for school. I was wondering if installing MS Visual Basic 2005 would work using this method? my teacher is giving everyone MS VB 2005 Pro edition. Will that install just fine using CrossOver? or should i try the VB 2005 express edition you can d/l? i want some thoughts before i try anything, i don't want to mess up my new macbook.
View 1 Replies View RelatedPowerPC :: Using 2005 Xserve Dual 2.3ghz G5?
Mar 11, 2009On LEM, in the description of this model, it says that these have a half length combination PCI/AGP 4x slot. Does this mean that I can use a half length AGP video card in this model Xserve? I have the chance to buy one for hundreds less than a comparable Powermac and was wondering if I was going to be stuck with PCI video.
View 1 Replies View RelatedPowerPC :: Wifi Card For 2005 IMac G5
Aug 10, 2009I move into my new place next week and find that the only source of internet will have to be through a wireless router. So now I am need of a Airport card. I have a 2005 iMac G5 (the generation right before the built-in iSight). I know that I need a Airport Extreme Card and an antenna, but I was wondering if somebody could fill me in on the exact part numbers I need for iMac. I've seen lots of different airport cards and do not want to buy the wrong one. If anyone can help me, that would be great.
View 11 Replies View RelatedSoftware :: Quickbooks 2005 No Longer Opening?
Oct 6, 2008I just upgraded my G4 PowerPC 1.5 GHz to OS X 10.4.11.
Now I can't even get quickbooks 2005 v.7.0 to open. It quits out pronto, there is a screen that flies up first and it says that I only have 15 more uses before I need to register. I can't get you the window word for word because it's only up there for a second.
This program worked fine when I was running 10.3.
I've tried uninstalling and reinstalling the software and the same thing happens.
I'm loath to plunk down $199 for QB2009 esp. if it won't work. I hope someone can help me 'cause I'm ripping out my hair on this one. All my business data is on there as well as my checkbook.
Power Mac :: Which Of The Latest OS X Versions Will Run On G5 Quad (2005)?
Mar 5, 2012I inherited a PowerPC G5 Quad Processor (2005?) with 2 video cards and PowerPC G5 dual processor. The hard drives have no OS on them so I'm investigating which OS will run on them. I would really like to put Lion on them, but I'll use whatever will work.
Info:
PowerMac
PowerPC :: Mid 2005 G5 Requires Antenna For Bluetooth Operation?
Nov 27, 2006I was wondering if the mid 2005 G5 requires an antenna for bluetooth operation. After looking on ebay, it seems that the module goes for only $20 bucks, but the antenna alone goes for another $20. I plan on using it to sync with my Motorola Razr, so it won't be far from the computer. So, without an antenna, will it still work well enough? (or at all?)
View 1 Replies View RelatedHardware :: Dual G5 2.0 (Late 2005) Not Booting - Get Heatsinks Out?
Jul 28, 2008I have a Dual 2.0G G5 Power Mac here. When you plug the power into the machine, it automatically powers up. The fans come on low and the power light is on. There is no hard disk sound or video. There is no chime or sign of any intelligence. The LED #7 (Checkstop) is on and solid red. I have reseated the video card, and taken out both pairs of memory dimms, rotating the pairs in various slots to eliminate a single dimm or slot. I pressed the SMU reset. I suspect the system board or the power supply. Anyone have a guess on what could cause this and how to test it? Also, anyone know how to get the heatsinks out so I can reseat the processors?
View 3 Replies View RelatedPower Mac :: Converting An Early 2005 2.0ghz To A 2.3ghz?
Jun 21, 2012i fell into an early powermac g5 2.0ghz. the processor runs fine for what i need but id like more memory than the 4gb allowed. ive found some reasonably priced 2.3 processors on ebay and such and was wondering if i can swap them out and put 2gb of memory in each slot to bump up to 8gb allowed with the stock 2.3ghz machine? or am i just stuck where im at? the processors on ebay are complete units, so i would just be swaping out the whole set, no soldering etc.
Info:
PowerBook, PowerBook G5 2.0 Early 2005
MacBook :: Finding 4.1 (White) And Circa 2005 Cinema Display Compatibility?
Nov 27, 2010I just wanted to ask how i can get this white macbook to run (if it can this cinema display)
Its the 4.1 White macbook, and the cinema display i had with my G5 which i bought in 2005. THe display has the old connectors (see MM photo Album below)
[URL]
Is it possible for me to get the macbook to run this? If so, how? (i can head to apple store today to pick up parts! Wife needs the largerr real estate to sort out her portfolio as i have put of buying a MacPro for a few months (just finished travelling for 3 years
