Intel Mac :: SD Card Sandisk 4Gb From Nikon D90 Is Not Recognized?
Jun 22, 2012
I have bought Lion from Applestore a few days ago. The installation ran fine, but, as a first approach, I was really disappointed when inserting in the side slot of my iMac an SD card Sandisk 4Gb from my Nikon D90: it was not detected, not shown in the desktop, nor in Disk Utility, no way to be shown in iPhoto or Nikon View NX2. By the way Nikon View had a very strange behaviour: clicking on a thumbnail it opened a new window showing again thumbnails which, when clicked, opened new window..Switched bac to Snow Leopard every thing ran fine again. Must I say not very encouraged to try Lion once again
Right after USB connection between Nikon N-60 and PowerBook Pro small error message window with "no camera connected" appears.This is a relatively new development as I've been tethering the N-60 to this powerbook for a couple of years without a problem. Camera is still recognized by remote camera control software (Sofortbild) but somewhat unstable now with frequent crashes.
I simply can't take any of my pictures off of my SD card. I've tried using the USB cable that came with the camera itself, as well as a USB card reader. iPhoto, and the laptop itself does not recognize the card, or that there is any device mounted at all. I've also tried checking "External Disks" in Finder Preferences, didn't seem to work.
I have a macbook and I have been using it just fine with my nikon l120 camera up until now. I have a bunch of photos and videos from a trip that I need to upload, today. Now when I plug in my camera...it doesn't show up anywhere on my computer! It does however show that it is charging because it blinks when it is connected.
I have a 32 GB SDHC Card (Class 10) in my Nikon Coolpix S9100. I formatted it in the camera, and now it's read-only on my Mac, and I can't format it so that it is writable. In fact, I have to reboot to my Bootcamp partition (Windows 7) to format it. It works with my Mac then, but as soon as the camera writes to it again, it becomes read-only.Â
Info: MacBook Pro, Mac OS X (10.7.4), 256 GB SSD, 2010 Model
I get many problems with the SD port of my MBP. I purchase today Hi Quality SQ Card (SDHC Extreme Pro). When I insert my card in my MBP : Nothing mount! What I have to do? An update of my mac firmware? Or format my card in special format on an other device?
macbook doesn't recognise external sandisk card reader, USB 3,in the shop said my mac with usb 2 would talk to each other, not happening, no icon on the desktop nothing.
I'm trying to move pics from iPhoto to a SanDisk Memory Card. I've dragged them from iPhoto to the "open" card, and they're listed as such, but when the card is placed in my camera, or a digital frame, it says "no images".
I have a Panasonic DMC-TZ4 that I use for both pictures and video. I have a 1 gb SDHC card that has worked fine connecting to my Macbook (last white middle model, late 2008) via my generic 23 in one card reader. However, today I purchased a HP 16 gb SDHC card and it won't read on the Macbook at all. My camera uses it and acts as normal, but the drive won't even show on my Mac.
I attempted to use the card reader in Windows XP Pro via Parallels, and the same thing happened. In fact, I got an error stating that the USB device had malfunctioned. The card reader IS old. Maybe it's having trouble with the higher capacity? I'm going to try the cable that came with my camera, when I can find it. I may need to try a new card reader as well?
I recently bought an SD card and reader for my Macbook Pro. It was working fine for a good month or so but as I was copying something to the card today, an error message appeared which said something about not having the right privilege to copy the content over to the SD card. The SD card was unmounted (if that's the word you'd use) automatically. When I tried plugging it back in to try again, nothing happened. I've tried plugging it into my PC but it says the device I've plugged in is not recognisable. The SD card reader has a red light that goes on when you plug it in which doesn't switch on anymore.
I've put the SD card itself into my TV as I was copying some video onto it. 15 minutes of the video has been copied and it's playable which to me suggests that the SD card itself is fine? Is there any way I can get it working again? I don't really understand what's happened.
Ordered from eBay Graphics Card Upgare (Ati Radeon x1900xt / Part# 102A5202752 000006) for my new Mac Pro (early 2008). It came in white box with Apple logos. Attached and powered it but I get only "No Signal" on my monitors (LCD: Eizo FlexScan S2401W and Samsung SyncMaster 225BW). Tried different cables: DVI-D Single-link, DVI-D dual, DVI-I Dual and VGA+Apple DVI-adaptor - no effect.
It seems like the new card isn't recognized properly?
I currently have a macbook that doesnt have an airport card installed. Apparently it was working fine up until a week ago, then just "disappeared from the top bar." Its a friends computer, so im trying to figure out what exactly he did. He had a verizon wireless manager app installed that was configuring the network connections itself, so i have since gotten rid of that.
I just installed the Airport extreme wireless card on my emac, but I have run into some problems:
1)after installing the card, the mac took a very long time to start up, I tested to make sure it was the card: everytime I started it up without the card, it did the normal thing, but with the card, it took a long time
2)after finally starting up, nowhere can i find where/how to configure the wireless. When I go to configure the network, it has all options, but the airport card option is not usable.
So: how can i access the airport card settings to get wireless connectivity?
My sd card adapter is not recognized on my imac with os 10.7.3. I cannot see where I can download the photos in iphoto. How can I find out if recognized by computer
Info: iMac, Mac OS X (10.7.3), sd card adapter not recognized in
So, I got the Polycarbonate Macbook , Parallels 5, and Windows 7 Home Premium. I installed windows on bootcamp and had parallels use the partition for windows and I got it all working, all the drivers on Windows are great, except the wifi. It's not even saying I've got a wireless card installed, it won't recognize that I have one in my Mac. But when I use parallels and when I boot it as a regular Mac, it works great. I've looked around and haven't found an answer to this? Anyone found a solution or could help?
So I have followed a bunch of the 'MacPro with mac raid card users wanting to do bootcamp' threads. I have attempted all the hacking required but have not been successful. I heard that bootcamp 3.1 will fix this problem possibly... so in the mean time I would like to remove my SAS drives and raid card and just use the sata drives that I have to do Mac OS and Windows.
I have removed the card but when I plug the drives in and boot up the machine, the drives are not recognized. Is there some plug that I need to reconnect somewheres?
I just received my Kingston 19-in-1 card reader and connected it directly to the back of my iMac (iintel) running on OS X Lion 10.7. It did not show up. I checked Disk Utility and it shows the following:Â
Info EOS Digital Name: EOS Digital (my Canon DSLR) Type: Partition Mount Point: Not mounted File System: MS-DOS (FAT 32)
[code]....
I am positive the problem is due to the MS-DOS (FAT 32) file system (my other laptop is a PC running on Windows Vista), but IÂ don't know how to fix this. Since i did not want to lose any files on my CF card, I took a blank formatted card (formatted in camera) and took 2 photos. When connecting the reader to the Mac it did not register.Â
I have a Sandisk 8-in-1 card reader which worked just fine on the PC, and the Kingston reader also works on the PC (after i tried all the above ). I have read other forum discussions whee people say that the Kingston card reader works on their Mac By the way, I checked on two Apple Stores to try and get tech support and got "voice mail jail" which is most disappointing. I suspect this is Apple company policy forcing me to make an appointment (which I am willing to do, but for heavens sake, don't cut me off on the phone!)
Won't recognize it when i connect both sources. in my documents it realized that it was uploading something but put the photos into a text file (ipmeta) How would i convert this into my iPhoto Gallery?
My MacBook Pro won't detect my SanDisk USB, I recently had the same problem with a card reader. Initially, I thought it might just be the card reader but now I'm thinking it is an issue with my MacBook.
I am using Snow leaopard and just installed Nikon Transfer software to transfer photos from my camera. The program opens and then crashes every time with the following report.
Date/Time: 2010-12-18 10:27:38.485 -0500 OS Version: Mac OS X 10.6.5 (10H574) Report Version: 6
Interval Since Last Report: 974886 sec Crashes Since Last Report: 21 Per-App Interval Since Last Report: 31 sec Per-App Crashes Since Last Report: 5 Anonymous UUID: A5916D0E-5E0A-4647-8506-B535358C1733
Just tried to transfer pictures from my new Nikon 810 to my Aperture program. Everything up to date. New computer mac book pro retina. But Aperture rejected the transfer, " unsupported image format".So I do I get the pictures into Aperture?
Info: MacBook Pro (Retina, 15-inch, Late 2013), OS X Mavericks (10.9.4), Aperturen up to date. Nikon 810
My mac won't read my external harddrive's videos that I took with my Nikon. Half the videos won't play, and those are .avi files.WHY won't they play anymore and how can i retrieve them?
