Mac Pro :: Remove Mac Raid Card From System / Drives Are Not Recognized At Boot Up
Oct 15, 2009
So I have followed a bunch of the 'MacPro with mac raid card users wanting to do bootcamp' threads. I have attempted all the hacking required but have not been successful. I heard that bootcamp 3.1 will fix this problem possibly... so in the mean time I would like to remove my SAS drives and raid card and just use the sata drives that I have to do Mac OS and Windows.
I have removed the card but when I plug the drives in and boot up the machine, the drives are not recognized. Is there some plug that I need to reconnect somewheres?
I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
I just got the apple mac pro raid card today, but after I connect it and all 4 SAS drives, the MAC OSX Installtion program can not detect the SAS at all, I open the RAID Utility but no dirve there, the battery is in charging status.
My Raid Card battery is dead and I'm wondering the point of keeping it. I only used it to raid together 2 hard drives to act as one in my computer. If I take it out will the 2 hard drives I raided cease to function or go on just fine? I did it for the performance boost for read speeds. My PCI slots are maxed and was thinking of opening up the raid card slot to add USB 3.0 ports but I'm also not sure if I can add a normal PCI card in that larger slot.
So I have a Mac Pro with Bay 1 acting as my regular start up drive. I also have three other Western Digital 500GB hard drives that I have been using as a RAID backup system. However, when I place all three of the RAID hard drives into Bays 2, 3, and 4, the computer will not boot. It never reaches the Apple logo, and continually tries to restart. So I figured one of the hard drives was corrupt.
However, I have tested all three hard drives in Bay 2 and the computer will boot just fine. I have also tested each bay individually (i.e. the same RAID hard drive in each of the Bays seperately) and the computer still boots fine. I can even power up with any two hard drives in Bays 2 and 3. The only time I can't power up is when all three of the hard drives are occupying all three of the extra bays.
Also, none of the RAID hard drives show up in Disk Utility or on the desktop. Shouldn't I be able to view them as normal internal or external hard drives being plugged into my Mac? They do show up in RAID Utility. Is this normal with RAID hard drives, or should they always show up in Disk Utility?
I created a new RAID backup with two of the drives together (Bays 2 and 3) and it recognizes it in System profiler. However, I want to be able to use all three drives for the RAID.
I just got a used mac pro quad. I plan to use it for video production- final cut pro, pics - aperture, and music production- protools. THe computer came with 3 - 10k rpm 160g hd's. Two of them are set up as a raid 0. I like the idea of having a faster drive as a boot drive, but 160 seems kind of small to me as the drive to run memory hungry apps and the operating system. Am I right? I could go to a 300g 10k rpm drive. I am also thinking about getting a bigger drive, say a 750g or 1 tb 7200 rpm. Should I use this as the boot drive or as a secondary storage drive?. If it's the boot drive should I add the other 160g 10k drive to the raid or keep it separate? I assume that neither way would be wrong, nor create a problem, but since I haven't put anything on it yet, I'm wondering what would be the most efficient way to manage my files and get the most out of my computer.
Can you just install a vanilla PC raid card into a MP, stripe a few empty drives in a RAID 0 config, and make OS X ignore both the RAID card and the NTFS striped drives when switching to and from Leopard?
I currently have a macbook that doesnt have an airport card installed. Apparently it was working fine up until a week ago, then just "disappeared from the top bar." Its a friends computer, so im trying to figure out what exactly he did. He had a verizon wireless manager app installed that was configuring the network connections itself, so i have since gotten rid of that.
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
I just installed a second eSATA card to my system. The connected drives mount very slowly (long delay) and eject even more slowly (more than 2 minutes, sometimes hang, sometime kernel panic).
I'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
I have never setup RAID before and this question may be totally stupid for that matter.
Can I setup RAID 1 (or call it mirroring) without the RAID card? I have two 1TB internal drives in my Mac Pro and I want to mirror them. I don't want to spend another 700 bucks just to setup a mirror.
Disk Utility shows some RAID options, but I am not sure how to use them, or if they will work at all without the RAID card.
I have a G3 iBook I've put together from spares just as a project. Everything works fine and will connect to the internet over the ethernet cable.As soon as I plug an Airport card in it refuses to boot, it won't even try so it seems to be a hardware issue.Is it possibly a dodgy Airport card or something else?It's a 2001, 600Mhz, Dual USB, white 12" iBook.
Normally I build my own machines, but this time around I needed final cut for some projects so I went all out and bought a nice mac pro about a year ago to use primarily as a gaming machine, with final-cut-pro video editing on the side. I've only done a couple FCP edits on the machine and as a result, have mostly used the PC side of things (via bootcamp) and play a game a few times a week on average (Team fortress 2 and FFXI etc). It's run beautifully, easily the best purchase I've ever made.Today is the first day I've had any serious issue with the machine. Having grown up building gaming computers, I am familiar with the corruption (most notably the 'green' corruption that stands out) associated with video cards. Last night I popped on a game called Dragonica that my fiance is into, she needed a hand with some boss thing, so even though I'm not super into it I hopped on. Before I knew it, the screen flickered green-colored-corruption for a second, then locked up. I restarted, thinking its probably a fluke, and before I could get all the way back in, it did it again. I turned off the machine and went to bed (had work in the morning).
The time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
I just got a brand new MAC PRO desktop. It came with a 600GB HDD. I purchased a second identical internal 600GB HDD. I wanted to do setup a RAID 1 using these 2 drives. Currently the main drive has the OS and all my other apps installed. I installed the 2nd drive and was fooling with disk utility. I'm not sure how to set this up however. I tried numerous guides online but I just cant figure it out.
MAC PRO (takes up to 4 internal drives) - currently installed 2 identical drives Leopard Using Disk utility
The RAID tab says "online" and the status is green (indicating the RAID is working). However on my desktop i see the 2nd hardddrive mounted with no contents in it. I just want to able to use the 2nd drive as a mirror so this way if one fails I'm still up and running.
I currently have a 2TB WD mirror edition that is setup in RAID 1 so it will mirror all my data. Now I also have a bunch of other drives laying around which I also feel the need to back up and currently I am doing this by doing a whole bunch of dragging and dropping and copying and pasting etc etc etc and this is making me very tired. I know that a setup is possible in disk utility but I am not at all sure about how to configure it so I wont lose any of my data.
Some details about my setup: Mac OS X 10.5.6 PowerPc G5 Harddrives: two 1TB WD MyBooks, and two 500gig WD Mybooks --> these pairs need to mirror each other and make my life less of a hassle.
I'm about to configure my 2006 MP with one of Apple's RAID cards using RAID5. I currently have 4x 750GB drives that I can use, but I can see needing more space in the not too distant future. When I do need more space, can I simply drop in a 2TB drive, let the RAID system reconfigure itself, and repeat this until I have all 4 drives in place? Is there a better or different way to do this? I know that if one of the drives is larger than the others, then only a drive space equivalent to the smaller drives will be used in RAID5. After addition of the fourth drive (per the above scheme), will the array then use the full 2TB of each drive?
This just started happening within the past month or so. None of my USB drives are being recognized or mounted. They appear within Disk Utilities and I can verify and run checks on them, but they do not mount. This isn't limited to one device or any specific port. It happens with USB memory sticks, external Maxtor drives (two different ones) and now my Canon PowerShot camera. Basically anything the Mac would mount as an external drive has this issue, so I know it's not specific to any hardware.
I do have a work around that I found on [URL] -- If I reboot with the device plugged in and hold the 'command' key the drive gets mounted. Next time I try the device though (in the case of my camera plugging it into another computer) it's not recognized again. I basically have to do this reboot procedure any time I want to use any device.
I have a 8-core MP 2.8Ghz with 10gb ram and Ati 2600HD. I'll someday replace the ATI with a quadro (all my application is 3d/CAD/Design) I'm installing 4 of the WD640 drives, they arrive on Friday.
I would love to order the CalDigit RAID card but after searching I finally figured out it's not available until next month.
That said, I need my system to start working ASAP and I don't want to wait if I don't have to.
I'm a designer, I need fast scratch so some striping needs to be involved. I also need data protection. At this capacity Time Machine isn't going to be of any use and I'd prefer redundancy anyway.
The 4 WD640s are replacing: 1 750gb 7200.11, 2 WD SE16 500GBs, and 1 320GB (Apple Stock Drive).
I would like to sell some of those drives to defray the cost of this endeavor but I'm open to keeping 1 or possibly 2 as external drives or stuffing one into the optical bay with a converter.
I want speed and reliability, of course! But really the largest motivator here is the combined drive aspect. Having so many volumes is driving me nuts.
My intention had been RAID 5 or 6 but I now know that Apple Software RAID can't do this. So now it seems with software RAID 0+1 would be the only option.
Realistically, does the cpu performance degradation outweight the speed gained from striping the drives? It's so difficult to determine bottlenecks.
Any thoughts on my best bet without/before the RAID card arrives. Can I migrate the array after installing the card without data loss?
If I just JBOD the drives can the concatenated set be broken up ever? I was thinking I could JBOD until the card came.
Anyone know if it's possible to attach two USB hard drives to a Time Capsule via a USB hub, and configure them in a RAID1 configuration and use them as my Time Machine backup disk? I would then use the TCs internal drive as network storage.
I have a bunch of Mac Computers here and I want to make a file server for them with about 5 drives in an RAID array to be a little bit secure. I am fairly certain how to go about and build myself a basic file server for a bunch of PCs networked together, but I am not sure about how to do it for a network of Macs.
Can I install a Raid Controller and connect say two drives to it, specially for windows? Will it be bootable? Or perhaps even connect the iPass of the four internal bays to an Adaptec 5405 and get a separate cable for my Mac Drive. Will both be bootable? What if I just want to boot Windows for now? I sometimes need to convert my early 2008 Mac Pro into a rather beefy Windows workstation and the lack of HW Raid is rather irritating.
I have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?
I have a Mac Pro with all hard drive slots filled. The first two disks (includes startup disk) are independent, and 3 and 4 are set up in a RAID 1 mirror. I have to take my computer into the Apple store for a repair and I'd like to just take out all the disks except for my startup disk... however I'm not sure how to go about doing so for the RAID. If I take the drives out, and boot up the computer with them no longer inside, will the computer "freak out" and/or will the computer no longer recognize the RAID if I put them back in again later?
If the latter is the case, will the data be lost or would I just have to set up the RAID again... and if I do that, will that also cause the data on the drives to be lost, or is it possible for it to mirror them again without needing to make changes to the data?
What should I be doing to my drives before building arrays with them?
Hitachi do a Drive Fitness Test and Seagate something similar but I have not been able to get either to work on a BootCamp Windows partition.
I tried formatting in Disk Utility and pulling some data on and off. I'm now running a scan for bad blocks in Drive Genius (is this worth it? It's going to take about a week at this rate). Anything else I should do?
My G5 PowerPC will not recognize any external drive, on the desktop or Disk Utility. One showed up briefly, but the computer locked up . I've tried each drive on my Imac and they all show up and work perfectly.
