I have a MacMini (about 3 years old, running OS 10.6.8).
Ever since I got it I have connected it to the internet via WIFI (using an Airport Express connected to a switch - connected to a router). No problems.
But now I have pulled a cable to my office and want it connected via ethernet.
But as soon as I plug in the ethernet cable I loose my internet connection. The DSL light on my router (Zyxel Prestige) flashes a bit and turns off.
So there is no internet connection.
But the network works (i can connect my XBox to the MacMini - which are both connected to the switch)I have tried removing everything (Switch, Xbox and Airport) so it's just the the router with my MacMini connected to it. Still looses internet. The routers DSL light goes out, and I have no internet connection.
I just brought a brand new IMac today but could not connect the internet with the cable though the cable does work with other computers. Do I have to change the settings or .....? Or its the problem of the jack?
I usually use an ethernet cable to connect to the internet. I recently bought a time capsule and in trying to set it up i plugged the capsule into the ethernet jack and my ethernet cable stopped working. I connected my computer into the capsule and its not the cable thats broken. I'm currently lost on what to try next, when i connect my computer to the jack, it says "nothing is plugged in" or something like that.
I was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
I was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
i brought my mbp in aug 2011 from the usa without apple care. i am currently living in saudi arabia.i bought apple care from amazon usa and they shipped it to me ,, since apple store doesnt accept foreign credit cards and doesnt ship international.apple store saudia arabia doesnot have apple care.
on trying to activate apple care on my computer it sayss that it cannot be activated from this region
Info: MacBook Pro, Mac OS X (10.7.1), 500 GB HDD 8GB RAM
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
I have tried searching for a similar question but have not been able to find an exact match. I have a new MacBook, a PS3, a Virgin Mobile USB and an Ethernet cable and I thought putting them all together so I could use the PS3 online would be easy! Could someone please give me a step by step process of what I am meant to be doing.
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
When you get home at your desk, put your MBP on the table plugging it to an external monitor or not, do you keep it running on WiFi or do you plug in an ethernet cable for your notebook? I am on a 25mbps line in my home and i find that when i plug in the cable my internet connection is more stable, faster and doesn't drop out sometimes. Because, sometimes on Wifi, websites take a little longer to load or it seems to not load at all. While on the ethernet cable everything is just speed of light instant.
I have also noticed that using vmware when i go away from the computer and puts windows to sleep, when i get back, it takes a while for windows to recognize the airport vmware driver and connect back to internet, while with the ethernet cable it is just instant (again). Noticed this while running windows live messenger and the time it takes to connect back. I also noticed that transferring files from my windows vista desktop computer to my macbook was alot faster on ethernet cable than on the wifi connection, even though my router supports 54mbps wifi. So are you guys satisfied with your wifi? Or do you use an ethernet cable for stability? Or am i the only one with minor wifi problems?
I was wondering if anyone knows if its possible to share my LAN internet to an XBOX 360 using the Apple USB ethernet cable (for the Macbook Air) on my Macbook Pro 13"? I've tried several routers, and all have them have failed me giving me massive timeouts and sudden disconnects. I think this should be a good solution.
All of the 15in cases I have seen in my time shopping online force the power cord to run towards the keyboard vs run to the back and in doing so, blocks the ethernet port. Are there any that do not exhibit this attribute?
Today when I turned on my computer, it suddenly would not recognize any kind of Internet connection. The Ethernet cable that I use every day now shows up as 'unplugged' even though it is plugged in. I have tried using a different cable, and it still shows up as unplugged. When I try to connect to the Internet wirelessly, there is always a connection timeout and I can't connect. I use a self-assigned IP address and I've never had this problem before. I've also reset my PRAM, but it hasn't worked.
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I have hooked up a 2009 Mac Mini (2.16, 4 gb RAM, SL 10.6.3) to my sony receiver.When using an analogue cable, it works, but in stereo of course. I plugged in a tosslink optical cable, and nothing happened, so I thought maybe the cable is broken, so I bought a new one. So when I plugged it in, it worked....for about 2 hours. Since then, I had no luck whatsoever, no sound, nothing, nada.I tried using the cable with my macbook, worked like a charm. Several reboots and a pram reset later, same thing, no sound. I checked the settings, but there's nothing really to change there, it's set to digital out and that's it.I even tried a ridiculously long terminal command to reset core audio, to no avail.
How do i connect my macbook pro to a macbook to transfer some files? I tried connecting via ethernet cable and restarted my macbook pro and it is still not visible or connecting to each other. I have my computer allowing connections through the settings
I have a crossover cable and I need to connect my imac to my macbook so I can download some of my files on my macbook to my new imac. I know I have to go to Preferences > Networks > and change the ethernet settings but I'm not sure what to do.
I've got an issue with my TC setup, I cannot for the life of me get it to see the cable modem and setup the WAN access. If you will pardon me I will cut n paste the lengthy description I left on the apple support list as I feel it is pretty thorough. I think I know my way around networks and dhcp but this setup doesn't yield any logs so I can't troubleshoot! I'm on Virgin Media 20megs and I can't connect using my brand new TC. Modem: Ambit 256 Time capsule : 1 tB, firmware 7.5 Test router : Netgear WGR614V9 MBP alubook 15 inch late 2008
I tried connecting with the test router and the MBP alubook to the modem and both can pickup the ethernet connection and get a DHCP lease after some coaxing (cold-start the modem first, then cold-start the router/mbp). But I'm having no luck with the airport extreme base station. Hard reset / factory reset / soft reset, any startup order, nothing works. I even left the devices offline for an hour before doing another round of testing. I tried several cables (including a crossover cable) and all configurations work apart from the ones involving the time capsule. Both the modem AND the TC ethernet ports light-up with a green light... but somehow the TC doesn't negociate its DHCP or even basic ethernet connectivity. I see there's a firmware 7.4.2 on the support site for the TC but I'd rather not downgrade the unit.
Here are the console logs from the MBP when it connects to the modem (yes, my MBP is named awesome, because frankly it is): Originally Posted by System.log when connecting MBP to Modem 29/12/2009 08:54:04 Awesome kernel Ethernet nvenet: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug 796d,0000,0de1,0005,45e1,0000 Originally Posted by Modem status page Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant MAC Address : <<redacted to protect the innocents>> Serial Number : 0014A49B00A5 Boot Code Version : 1.1.2c Software Version : 2.111.1002 Hardware Version : 1.9
I have a MacBook Pro with OS X 10.5.6 I connect to the internet with an ethernet cable direct into the wall. When I open the network connection box, it says the ethernet is connected, but it will not load any web pages. Friday I was using it fine and then got off. Came back a bit later and could no longer connect to any pages. I have spoken to my internet provider and they say my settings are fine. I am online on my desktop that connects using the same ethernet cable. I am not having any trouble connecting on it. I went and bought a new ethernet cable, just in case it was the problem
plan to transfer from my Windows PC with the migration tool.I would like to know if it's possible to connect directly my PC to the Mac with an Ethernet cable. Is this considered as the same domestic network?
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)