Intel Mac :: 27 (late 2009) Target Display With PC?
May 15, 2012
I am trying to connect my windows 7 laptop to my iMac 27 (late 2009). The laptop is an hp elitebook 8440p with integrated intel graphics and it has a display-port. I bought a displayport to minidisplay port cable and connected to my iMac 27; nothing is happening. My laptop says no displays detected and the iMac does nothing when i press command-F2...i've also tried command-F2-Fn. It doesnt even seem to respond to command-F2. Also under the keyboard shortcuts menu there are only two shortcuts for displays and its to dim and brigthen the display. The iMac and PC are both up to date with software; OSx 10.7.4 Lion.
Long story short, I now have a late 2008 15" MBP with a broken display housing, LCD housing, and glass bezel. The LCD itself, along with the iSight etc., is functional. I have the opportunity to buy a display assembly for the mid 2009 MBP, including a new screen, for a good price.
Would replacing the entire display assembly with the mid 2009 assembly work? Or could I buy the new assembly and simply replace the screen with my current one? Essentially, what is the compatibility of the two units. I'd prefer the mid 2009 screen for obvious reasons.I searched the forums here, as well as searching many other places, and I have not found the answer.
I want to buy the 27" iMac - but only if I can use it as external monitor for my Lenovo laptop when working from home. A the Apple store in London they said that this is possible with a Belkin converter from hdmi to mini display port (with a USB power caple to turn it into an active signal). The laptop also has a displayport.
can I replace my HDD in my late 2009 iMac myself? The current drive is toast and I've heard that late 2009 Apple started using HDDs with thermal sensors.
My CPU fan seems to be running fast a lot on my late 2009 IMac. When I wake my system up in the morning the CPU fan is running at 939rpm. After 20 minutes of surfing I can hear it and it is at 2456rpm. All of the internal temps are around the same.Â
My iMac stopped booting. The fans and hard-drive spin up but the screen stays black and I can hear that the hard drive isn't been read after the initial spin up.Â
I decided to open it up to take a look at the diagnostic LEDs to see if it might help me diagnose the problem (the most obvious failure is the logic board). I can't find the LEDs anywhere, where are they? Does my iMac even have diagnostic LEDs?Â
The other possibility is that I can't find the lights because they aren't lighting up. The fans, the hard drive and the CD drive all spin up fine so at least I know that there is some power running though it.
Info: iMac, Mac OS X (10.6.8), 27" 3.06GhZ (late 2009)
I've got an iMac 27" late 2009 with these: Processor 2.66 GHz Intel Core i5 Memory 4 GB 1067 MHz DDR3Â Graphics ATI Radeon HD 4850 512 MB and I would like to upgrade my "ATI Radeon HD 4850 512 MB" to something higher with 2 GB. My question is: is it possible? Like taking off the screen and display and replacing the old video card with a new one without any issues?
I am running a new 27" iMac and a MBP 17", both running 10.7.4. Both have Thunderbolt ports. I bought a thunderbolt cable and wish to use the iMac as an external screen for the MBP - Target Display Mode. I have connected both togther via the thunderbolt cable and used Cmd-F2, but nothing. System Information identifies the Thunderbolt ports (2 on the iMac) and nots No Devices Connected.Â
I have a new 3.4 GHz Thunderbolt iMac and can't get Thunderbolt Target Display Mode to work with my current-model 13" MacBook Air or the current model 15" MacBook Pro furnished to me by my employer. Cmd-F2 just creates a beeping sound. I tried three different Thunderbolt cables. (They are not Mini DisplayPort cables. I have one of those from a previous model of iMac and it both looks different from the Thunderbolt cables and System Information doesn't show any change when I try to patch the computers together using it.)
All machines are fully updated to MacOS X 10.7.4 with all firmware updates applied. System Information shows that all are equipped with Thunderbolt interfaces; the Console app shows the kernel message indicating when the Thunderbolt devices are plugged in and removed; all three machines work in Thunderbolt Target Disk mode in both directions with all three cables with both Thunderbolt interfaces on the iMac.
Target Display Mode display mode won't work with my imac 21.5" mid 2011. I tried both commands cmd+f2 and cmd+fn+f2 but nothing! I'm using thunderbolt cable to connect my macbook air. Why I'm can't use my imac as external monitor?
I'm using 2 IMac 27' and one is simply used as an external display. When I wake up the computer from sleep, it works on the main monitor, however the external display still has a black screen. I have to unplug the external monitor to get it to wake up. I tried unplugging thunderbolt and replugging it in which worked the first time, but same issue again not waking up.
What are the differences and pros and cons? Can you switch out the keyboard on one? Switch harddrive? And just general differences. I'm still on windows but thinking about switching. So a little help would be much appreciated.
I have a Macbook pro (late 2009) and I'm trying to connect it to a fairly new Samsung LED tv. Ive tried to connect it to the tv with audio with two cables: a minidisplayport/hdmi cable and the audio jack/RCA cable. The video works just fine, but the audio is not working. The computer doesn't even recognize the tv as an audio output device. I found out that only macbook pro's made after late 2010 support audio through the HMDI cable so i was trying to find a cable that will support audio on my 2009 macbook pro.
Last Friday, my half charged Macbook Pro randomly turned off and was unresponsive. No sleep/power indicator light, no start up chime, nothing. The only thing that works is the battery indicator light. I have tried a PRAM reset, SMC reset, everything suggested on this website and in the manual. I'm wondering what I'm looking at replacing here, and what the cost could be.
I've a DVD from a Mac mini Late 2009 box, named as: Mac mini Mac OS X Install DVD. Mac OS version 10.6. Disc version 1.0 2Z691-6561-A. I think it's a build 10A432 of Snow Leopard.
I recently purchased my mac and I had this problem once already, but it fixed it quickly with a safe reboot. When I turn it on the chimes go and the grey screen appears with the apple logo and loading bar. The loading bar disappears before showing any progress and goes straight to the apple logo with the gray spinning wheel. I've tried doing a safe boot, along with resetting the PRAM and SMC, but nothing works.
Working in Excel today, I was highlighting groups of cells with color when the entire screen suddenly had a pale grey-green tint. Can still see colors beneath, but everything tinted (not just the Excel window, but the entire display). White, of course, is most dramatic. The Dell monitor beside it is fine.Â
I've recalibrated color a half dozen times (have always had to do that to get the Dell and iMac screens as similar as possible). It's impossible to get white on the Mac. Rebooted several times, including hard boot, zapped the PRam, ran Permissions Repair and Disk Repair from the startup CD. Installed Temperature Monitor to see if there's a heat problem, but I could not find normal temp values anywhere on the Web, so that was something of a bust. Temps attached below in case there's an educated set of eyes out there....Â
Ran some online tests, too, for color distortion, dead pixels, that kind of thing, but nothing reveled.Â
I've been all over the Web looking for some guidelines, but most posts at apple and elsewhere seem to focus on later-model iMacs with the yellow lower screen problem when new (It's not that) or panic screens of wild colors, stripes, and the like. This is just a grey-green tint that covers the entire screen, rendering whites grey-green and colors muddy.
I am in market to upgrade RAM from 4GB to 16 GB on my refurb iMac which i bought early this year , not too good with finding correct ram and a good price..
I know, I know, another thread asking for advice. I've read through the forums, and I'm not really finding what I'm looking for. I'm seeing most of the sleeves on Amazon are listed as being for the other Macbook (the unibody aluminum one) I want a snug fit, and the power adapter shouldn't be factored into this decision, as I don't want a messenger bag, I will carry my Macbook in my backpack, so we're good there. Price range is under $40 USD including shipping. I was at the Apple store last week, and I looked at the Paul Frank ones, I don't need a designer case, I want one that will protect it, and that's about it.
However, the part/model number is listed as MB363ZA/A, but i've seen some mentions that the part number is now either MB988ZM/A or maybe even MB988LL/A ? Does anybody know which will work and what is official?
I phoned up an authorised Apple reseller in my city (not a proper Apple store) a few weeks ago and they confirmed the necessary part number was MB363ZA/A, and this is what they would install for about �35 (price including purchase of the card).
