Has anyone tried to use a wireless USB adapter to "stream" from an iMac to an HDTV? I was thinking of using a USB to VGA adapter and a USB to audio adapter with a wireless hub to get my iMac to mirror on my HDTV (just a few feet away, but through the floor).
View 2 RepliesI have an iMac and an ACD monitor connected, therefore I have no open port to connect to my 37" Panasonic LCD.
I'd like to connect the TV to my iMac somehow, I'm wondering if wireless is a (reliable) possibility. If so how do I go about it?
Do I buy a 'media router', such as the D-Link DSM-750? Then simply plug the TV's HDMI port into the D-Link? (I'm not network savvy at all.) Sounds simple enough if that's the case....
Are there any better ways, or better products that I can use to play divx files wirelessly to my TV?
Also, I'm using an Apple Airport Extreme Time Capsule, would the D-Link replace this or could I (easily) hook it up to my Apple router?
Is there a way to stream my macbookpro (2010) to my HDTV without a cable ?
View 5 Replies View RelatedI need advice on an affordable wireless usb adapter for my imac g5. i have the netgear ma111 that worked fine until i upgraded my netgear wgr614 router. now it sees the router but cannot or will not connect.
View 2 Replies View Relatedpretty new to the Mac side of things. I got my MBP about 3 weeks ago I think. I got a mini display to hdmi adapter (off ebay, so this may be the problem). I hooked it up to my laptop and tv and it took me a while to find the mirroring box but I got that working so what's on my computer pops up on the tv. I go to play a tv show, and the sound is just on my computer. I went under system pref and sound but only "internal speakers" is available for the output. Am I doing something wrong? Or do I just have a cheap adapter?
View 4 Replies View RelatedI just ordered a new Macbook pro. I'm going to have a HDTV in my room at school and I want to be able to connect my laptop to it. So I could buy apple's mini displayport to hdmi adapter and then buy a hdmi cable, but that would probably end up costing me like $60. I'm wondering if anyone knows if something like this would work? It seems like it would work but its from hong kong so I donno lol. Anyway, anyone know any cheaper alternative to the over priced apple adapter? Also, I understand that the new macbooks have audio output through the minidisplay port so the adapter has to support audio too.
View 8 Replies View RelatedI have a Rev A Macbook Air with Micro DVI out. With the Micro DVI to DVI-D Dual Link. I am trying to find an adapter from DVI Male to HDMI Female to run to my HDTV.
View 1 Replies View RelatedI've got a recent MBP with Thunderbolt. I'm trying to connect it via a Mini DisplayPort-to-HDMI adapter to an HDTV with HDMI, but the MBP doesn't seem to acknowledge the addition of the new display. What it IS doing is flickering the built-in screen occasionally, the way it does when connecting to a projector or something, but it never shows any additional displays in the displays CP, and never seems to send any signal out to the HDTV.
Mac: MBP 2.3 GHz i7 with OS 10.7.4
Adapter: Belkin Mini DisplayPort to HDMI
TV: Sony 32" Bravia
When i connect my hdtv to my mbp via vga (using mini displayport vga adapter) I am only achieving a 1080i signal. I did some research and I found that there are two 1080 resolution options in leopard, one being 1080i and the other being 1080p, you simply have to turn the display options on in the menu bar and then select the one you wish to use.
With this new found knowledge i found the two resolution options and tried them however, I found that one of the 1080 resolution options outputted 1080i whilst the other outputted 1050, despite clearly saying 1080. This has me baffled! Is this due to me using a vga cable and has anyone had similar issues? Additionally, is it possible to achieve a 1080p signal from a mbp? Mine is the late 08 model if that makes a difference.
Was thinking of trying to run this through my Onkyo SR-805 receiver to my plasma: [URL] Is this the best option available?
View 5 Replies View Relatedi have a white macbook (2009 version) and am looking to get the best video possible from it on my 52" lcd hdtv. currently i am running a mini dvi (from mac) adapter to vga adapter that then connects to the hdtv using a 25' vga cable. resolution is ok, but isnt it possible to use one of the hdmi inputs on the tv for better quality???
View 1 Replies View Relatedi just bought the macbook alu. w/ the mini displayport, i tried to plug it directly to my samsung 1080p hdtv with the Mdport to vga cable but the tv didnt display anything. so i searched the web to find other solutions (Mdport to dvi -> dvi to hdmi cable), but for me that means buying 2 other cables so i was wondering if i could use this route: mini displayport to vga -> vga/dvi-i adapter -> dvi-i/hdmi cable -> 1080p hdtv? with this example, i would have to buy only the dvi-i/hdmi cable since I already have the vga/dvi-i adapter (my old MSI 6600gt one) so hows that sound? thx for giving me the answer ASAP cause I need to make a surprise presentation for my boy!
View 8 Replies View RelatedWhich would be better, a USB wireless adapter or installing an actual wireless card? The computer is a PowerMac G5 1.6GHz and I want to add wireless capability to it. Which card is the best and which USB adapter is the best. We'll be using a Linksys router.
View 4 Replies View RelatedCan Airport stream itunes and extend my wireless network at the same time?
I have an Airport in my 3rd floor bedroom that I use to feed iTunes to a receiver. When using my iPad (and iPhone) upstairs they are too slow since my wireless router is on the 1st floor. I have an Ethernet connection in my bedroom and could plug the Airport into it. If I hard wire the Airport can I still stream iTunes to my receiver and have it extend my wireless network at the same time?
Are there any that a store like best Buy sells that are compatible with a Mac / Macbook? I need to pick up a signal in another room, and the only way would be to run a long USB cord attached to a wireless adapter...but it seems like none of the bigger brands sell Mac-compatible versions. If anyone knows of a compatible adapter, please post about it!
View 8 Replies View RelatedI have a 2.66GHz Mac Pro and will be moving it to a room that does not have a wired internet connection but does have wireless in the house. Other than getting a USB wireless adapter is there any way else so I can take advantage of the wireless signal to get online using my Mac Pro?
View 9 Replies View RelatedI have a Mac Mini G4 with PowerPC processor and I was wondering if anyone has some suggestions for obtaining a wireless adapter of some sort to use with it.
View 1 Replies View RelatedSo i recently bought a Zonet usb wireless adapter (ZEW2051) on tiger direct for around 7 bucks and now want to use it with my ibook (my airport card isn't working). I have seen solutions for other cards but can't seem to find an answer for this one.
System Profiler recognizes it as
Quote:
USB2.0 WLAN:
Version:48.02
Bus Power (mA):500
Speed:Up to 480 Mb/sec
Manufacturer:ZyDAS
Product ID:0x1211
Vendor ID:0x0ace
I purchased the Samsung SCX-4500 Laser Printer, and I want to makie it a wireless printer. I am wondering where to purchase a USB Wireless Printer Adapter that would plug into the printer, and how would I set it up. Note: It wont be connected to a wireless router, I want to connect a USB Wireless Adapter to the printer instead. Am I suppose to be looking for a bluetooth adapter for the printer, and any bluetooth USB adapter work?
View 3 Replies View RelatedWhen both computers Beige G4 (os 9,2,2) and an eMac (os x Tiger) are connected to the internet with wire cables, there's no problem. I can hook up to the eMac from my Beige G4 (os 9.2.2)using Chooser/Appletalk/and inputing the IP address of the eMac (from Network preferences); which lets me connect.
When I'm hooked up to Internet- wireless with Afterthemac n300 usb internet adapter on eMac, my problem is that I need to have an IP Address of the wireless computer (eMac 750mhz) so that I can connect to it with a G4 Beige Mac os 9.2.2) which I can't find. I get the following in the Network preferences: Configure IPv4: Using DHCP (drop menu); IP Address 192.168.2.11; Subnet Mask 225.225.225.0; Router 192.168.2.1 The optional boxes for DNS Servers and Search Domains are empty.
These numbers were suggested by the Internet provider, which I entered in anticipation and before I received the n300. The router which I rent from the service provider is a SIEMENS GIGASET567. So- is there a way that I can change the numbers from above so that I can connect both computers. I tried the IP 192.168.2.11 but eventually a message comes back telling me it can't find the server. Another reason might be if I would want to hook up to the eMac from another office to get information on that particular computer.
I currently have a Linksys WUSB54GP that I had hooked up to my PC for wireless access. Well it doesn't agree well with my new airport extreme. Anyone using something they would like to recommend that DOES work with an airport extreme??
View 1 Replies View RelatedHas anyone heard of a wireless adapter for your monitor? Do they work? How well?
View 1 Replies View RelatedI have a macbook that is not wireless n enabled. i know i could take apart the macbook and install a new airport card that is and that would work (and probably will one day soon) for the time being would a usb adapter work the same?
Also airport seems to drop its connection pretty frequently and doesn't like to work more than a few feet away from the docking station. I'm hoping it's because the airport card is old. Would an adapter fix this as well?
Does it use 5GHz?
View 1 Replies View RelatedDoes it use 5GHz?
View 1 Replies View RelatedAnyway, I have a Powerbook G4 that's about five years old. It doesn't have an internal wireless card so I bought a Linksys wireless adapter to plug into the side of my computer when I first got the computer. It worked fine for years. I recently reformatted my hard drive and now when I insert the wireless adapter it no longer will allow me to connect to the internet. I'm aware that Linksys doesn't have drivers for Mac users so I'm kinda confused how I got it to work in the first place. I don't remember installing any third party software, but I may have-- it was a few years ago. what I should do to allow me to use my linksys card in my Mac? I've heard of Orangeware but I'm not sure if that's the solution.
Oh one more thing, when I plug the card in, an icon appears in the top right corner that shows something is plugged into the port but doesn't allow me to click on it and search for wireless connections.
I am trying to get onto our home wireless network using a G4 a friend has just given me. It doesn't have an airport facility so my friend has also given me a 802.11g wireless ethernet adapter. I have followed the instructions exactly (accessing the adapters internal configuration and setting it to the wireless networks SSID and channel, then going back into the network settings and re-setting it to "obtain IP address using DHCP') When i restart the computer the network status reads as "built in ethernet is active and has a self-assigned ip address. you may not be able to connect to the internet" (the marker next to it is yellow)
needless to say I cannot connect to the internet.
i have my xbox hooked up to the internet through my airport extreme but recently it stopped recognizing my network and i cant figure out why? All of my other wireless devices work on my airport except my 360 and my imac running windows 7 in bootcamp finds my network but only gives me limited access to the network.
View 1 Replies View RelatedI've been using a wireless adapter to connect a PC and a laser printer to my Apple based network. The laser printer is always available but the PC only shows up occasionally. I am not making any changes to cause it to show up when it decides to.
View 1 Replies View RelatedI recently bought a Mac G4 Power PC Graphite used from a friend of mine for $30. (By the way, i'm only 13) My parents said that I cannot buy any new hardware or software for it, including upgrades. The mac is running 10.1.5 with 320 meg of ram. I need to get a netgear ma111 usb wireless adapter to work, otherwise i will be without internet.
View 7 Replies View Related