Hardware :: Usb Drive In System Profiler But Not In Finder Or Disk Utility?
Jan 1, 2008
I purchased a black MacBook (10.4.11) last may and it's my first Mac. Thus far, I have only had one problem and that is that my I can't see my Motorola Z6m in finder or disk utility (but it is in system profiler). I also do not see it in Terminal under /Volumes. Inside the phone is a 2GB Verbatim microSD card that works fine in my card reader on the same machine. On a side note, bluetooth works fine.
The phone works as expected in the PCs I've tried it in, including a parallels vm running XP on the MacBook (I don't have access to any other Macs) which led me to believe it was a formatting issue, but then the card shouldn't work in the card reader either and it should still show up in disk utitlity. Am I not correct?
I have tried rebooting, unplugging/replugging the device, removing the battery, and reinstalling OS X (I wanted to do it to get rid of Unsanity's APE anyways). I have plugged it into either port on the MacBook with the same result. I have also emailed motorola tech support. Additionally, I have done quite a bit of googling and have found other people with the same issue, but none of the suggestions have worked for me or were otherwise unworkable (some suggested downgrading to 10.4.9).
I have also heard of trying it in a powered usb hub, but the thing is, why does it work through the virtual machine if a powered hub is required? Or am I missing something in this?
View 2 Replies
ADVERTISEMENT
Jun 1, 2014
I have used this drive for a little while now. It now won't be read by a my Mac Pro or iMac. I'm about ready to take the drive apart. I have tried all USB ports and different power sources. The blue light comes on the drive, the drive spins, but the computer won't read the drive...
Info:
Mac Pro (Late 2013), OS X Mavericks (10.9.3)
View 5 Replies
View Related
Jan 14, 2009
I have purchased a Seagate 500gb 2.5 inch laptop hard drive to replace my feeble 120gb drive. I am trying to set up this drive using carbon copy cloner before changing it over, I'm using an external enclosure for this. The problem I'm having is the hard drive isn't recognized at all.
It's not showing up in finder or disk utility so I don't know how to format the drive.
I'm using Leopard 10.5.6
The instructions that cam with the enclosure mention setting the hard drive to function in master mode, what does this mean? I don't want to go to all the effort of changing the hard drive if there's some sort of problem, and I would rather clone my drive before removing it too.
View 8 Replies
View Related
Aug 14, 2010
New member. Just got myself a new MacBook pro i5 15' to replace my old MacBook. I noticed when I opened the system profiler under ATA it said no hard drive was present or selected or something to that effect. Everything is running beautifully on the machine but I was just curious why nothing showed up. Any ideas?
View 1 Replies
View Related
Apr 23, 2010
I want to reinstall OSX but finder does not work and disk utiliy does not work and the computer does not see the dvd drive, when I boot and hold c it does not see the dvd and won't boot from it, is there any other way to do an install., it's the new imac 27" flat screen with core i5, 4GB ram, boot ROM version IM111.034.B00, OSX 10.6.3.
View 7 Replies
View Related
Apr 10, 2012
I just reinstalled Lion from a fresh harddrive. I did not use the migration asistance to pull files over to the new drive, I selested files and dragged them over, So not to fill the drive with things I dont need....
So I "Get info" on the main harddrive it shows Which is crazy! Then I use Disk Invintory and it shows:
and Disk Untility shows:
Why the difference? Simple question and How do I free up space? I'm also trying to back up using time capsule*
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 27, 2012
Lion Recovery HD is suddenly showing up in Finder (Sidebar & Desktop), also in Disk Utility.What is going on? I don't want it to show up.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 11 Replies
View Related
Sep 3, 2014
Having trouble with my backup drive. It's a 1TB WD My Passport Ultra.
The drive mounts in Finder, but is extremely slow. In Disk Utility, the drive shows the correct disk space usage and number of files; but in Finder it only shows the folders/files at the root level of the drive, and each has a size of zero bytes with no items:
What is happening? How can I access the data (it's obviously still there if DU shows the files) and (possibly) fix this?
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.4)
View 2 Replies
View Related
Jul 17, 2009
I have a JVC Everio HD camcorder and am having some trouble importing the video. This morning, the camcorder was recognized by Finder and I could enter and view the files. However, the files are in .MOD/MP4 format so they would not import directly into iMovie.
This afternoon, I found a tutorial on how to convert the files so plugged my camcorder in again, only to find that Finder is no longer acknowledging it. It is recognized in iPhoto and Disk Utility.
View 1 Replies
View Related
Jun 21, 2012
My USB doesn't seem to be showing in Finder and Disk Utility. Why could this be?
Info:
Mac OS X (10.7.4)
View 1 Replies
View Related
Aug 26, 2009
I partitioned my disk using Terminal's diskutil. I decided i didnt need the partition anymore, so i deleted it (using Disk Utility.app) and added the free space to my mac partition. Basically, Finder and Terminal dont show the free space added back, and Disk Utility shows the space added back to the disk. I tried restarting, repairing disk (which coincidentally had an unrelated problem), repairing permissions, but the problem is still happening
View 3 Replies
View Related
Sep 3, 2014
Did a fresh Bootcamp install of Windows 7 on my MBA running 10.9.4, switched back and forth a few times and now the BOOTCAMP partition doesn't show up in the left pane in Finder. I hopped into Disk Utility to see what was going on and it was there, just not mounted, so I clicked mount, was told it couldn't be mounted, and it suggested I run first aid on it. I clicked Verify, nothing useful to me, then Repair, and got quite a lot of feedback that I do not understand, and then after that it was still unmountable.
I tried to copy everything it said into a pastebin because it was very long with lots of starting and stopping and counting percents inbetween, but it was over 500kb and that's the limit for free users on pastebin, so here's a trimmed version. [URL] .... I tried booting into Windows after that, and it jumped into System Repair. Apparently, according to Windows, my Boot Manager is missing or corrupt... and since I still can't access it from the Mac side of things, I thought I'd just wipe the partition in BootCamp Utility and start over.
Except instead, I get this error: "Your disk could not be restored to a single partition.An error occurred while restoring the disk to a single partition."
Disk Utility let me wipe it but I still can't mount it, either, again suggesting I run first aid on it (this does nothing). I can't boot into the Mac's Recovery mode either. It just jumps straight to Internet Recovery. When I hold option upon boot, all three partitions show up (Mac, Recovery, Windows), but when I click the recovery one it loads for a bit and then the laptop just instantly shuts off.... Have I corrupted my internal harddrive perchance?
Info:
MacBook Air (13-inch Mid 2012), Windows 7
View 4 Replies
View Related
Apr 24, 2012
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 27, 2014
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
View 1 Replies
View Related
Feb 22, 2010
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies
View Related
May 12, 2012
i have this strange issue that occured just out of nowhere without me (knowingly) having contributed anything to it.yesterday i launched my iMac and my external firewire drive wasn't showing up in neither the finder nor on the desktop. i instantly thought about a hard drive crash, but soon tried other things to evaluate (or not) my guess.
for instance, i unplugged the drive waited a few minutes before i plugged it in again. since this iomega drive is also equipped with a regular usb port i also switched cables and tried connecting it via the iMac usb sockets as well as via an usb hub without any luck. the drive still won't show up. so i launched the Disk Utility, to see if the drive needs some checking/repairing, but to my surprise it wasn't showing in Disk Utility either.
thus far i only considered this to be an issue with only this particular external drive, but when i eventually switched on a 2nd external drive (this time an usb drive i use for Time Machine) that drive also refused to show up in either the Finder or the Disk Utility app.
curious as i was, i then fired up a 3rd and 4th external drive and now had all 4 drives running at the same time. none of which were showing up, just as if they weren't even connected with the iMac.
this strikes me as more than odd. i've heard about hard drive failures and crashes. they just occur over time. maybe and under some very strange coincidences it is possible that two external hard drives quit their jobs at the very same time, but seriously .... 4 of them?? i hardly think so.
well, maybe it's the iMac's usb/firewire controller that's causing the trouble, i thought. but then again, my other connected devices (iPhone, iPad, Printer, Scanner, eyeTV) are functioning and get detected just fine as far as i can tell.
i have no idea what's going on. i dismiss the idea of 4 external drives having crashed all at the same time just as much as i don't think that the iMac's usb/firewire controller has got any issues. re-formatting any of the 4 drives is out of the question and even if i'd consider such desperate measures, the Disk Utility wouldn't let me re-format anything anyhow, because the drives aren't listed there. i wish i could just use my Time Machine to resolve the issue but, as i mentioned earlier, i can't access the Time Machine because it also won't show up.
Info:
iMac, Mac OS X (10.7.4)
View 14 Replies
View Related
Jan 10, 2011
While I was partitioning my disk, disk utility froze, along with my whole system. So I was forced to reboot.
Now my Mac thinks there's an 80 gb chunk of data somewhere (the data that would have been my partition), but I can't find it. How do I regain the lost space?
View 2 Replies
View Related
Oct 23, 2008
I've tried using disk utility already.
View 24 Replies
View Related
Mar 10, 2012
While trying to pepair permissions systom freeze up. So I put in the startup disk hit restrat holding down c and tried to repair permissions that way and it froze up that way too. I had to manually turn off machine.
Info:iMac, Mac OS X (10.6.8)
View 2 Replies
View Related
Dec 30, 2007
Started G5, got a question mark. Rebooted from disk. Tried to repair. Told me it could not exit and complete repair to HD. Restarted again. This time everything in utility window red. Message is Fatal Hardware error to disk utility. Back-up if not completely failed and replace with new drive.
Not great at behind the scenes with my mac. Does this mean a shop visit. Any estimate on cost to me. Had lots of Macs. This is the first to crash and burn and its not that old.
Information:
G5
Mac OS X (10.4.11)
View 3 Replies
View Related
Jun 17, 2009
I was working in windows using mac drive last night and I opened a dmg which I found out later was corrupted. It didn't open in windows, and windows hung to the point that I had to do a hard restart. Once everything booted back up (it took forever, btw), I found that one of my HFS drives (not the one I was working on at the time, oddly enough) had disappeared from both windows and osx. I cannot see the actual drive in device manager or disk utility, and things like diskwarrior and data recovery 2 don't see it either. I know it sounds like the hard drive failed, but is it possible that a software crash could cause the physical drive to completely fail?
View 2 Replies
View Related
Sep 1, 2014
I am trying to check my Harddidk by doing a Verify. So I went to Utilities, select the Harddisk, and then click VERIFY.
Then I the following message pops out: "Disk Utility stopped verifying "Ryan ManUtd" (note: Ryan Utd is the name of my harddisk)
Then it the window panel, there is a message which says: "Error: Live file System repair is not supported"
What does this mean ? Other than that, I can still access the contents in my harddisk ...
Info:
15.4, Mac OS X (10.6.8), 27" iMac - 4GB RAM, 1TB HDD, 1GB ATI Radeon HD, i5 QuadCore
View 1 Replies
View Related
Mar 12, 2008
when I go to memory in system profiler for my mac pro it coms up with serial number manufacturer,pn,is this correct info?im having amnesia about this jsut want to clarify if this info always shows up
View 1 Replies
View Related
Nov 1, 2009
how do i edit the system profiler stuff? This is what it says for my system profiler on my macbook
notice the "mac pro" and and the user name is wrong, its not JD, its Jon
This also show up on the log in screen. How do I reedit this?
View 2 Replies
View Related
Oct 18, 2010
I was trying to get battery info so I was looking in "system profiler" and thought I might like it in the dock. However it appeared to be placed behind the dock on the desktop, so I just "right clicked" it and said move to trash. When I did that I decided to go see if I could find system profiler in my apps or whatever, and it was gone. So I went to trash and hit "put back." It went back into its original folder, but it also went back onto the desktop. How can I remove it from the desktop?
View 5 Replies
View Related
Oct 30, 2010
I am a new Mac owner and still wandering around in OSX, but I have a question. In System rofiler>Software>Applications, every application has 2 listings. Some have what looks to be a previous and new version, and some have both listed as the same version. Is this right? Why is this?
View 2 Replies
View Related
Dec 5, 2010
Someone else pointed out in another thread that on the 11" MBA with 4 GB, if you look in System Profiler under memory, the software says that there are two RAM slots. I can confirm that on my MBA. So:
1) Is the same true on the 13" with 4 GB RAM?
2) Has anyone published a tear down of a 4 GB model just to be absolutely sure that there is only one soldered RAM slot? (I know it's unlikely that a second one got crammed in there, but I'd just like to see the tear down picture)...
View 9 Replies
View Related
Jan 23, 2009
im just wondering if there's a way i can modify the 2.0 that appears on the "About this MAC" and also when i click the "more info..." button...
reason: i have a snobby sister who got her self a 2.4 version and i just want her thinking i also have a 2.4 version
TRUST ME SHE DOESNT NEED THE BACK-LIT lights... as i've turned them off on her macbook (n she hasnt noticed since)
View 20 Replies
View Related
Feb 28, 2010
I got a camera, Nikon Coolpix S230, but It wont show up any where exept System Profiler, So I cant get the pictures off it. I am on a Early 08 Macbook on Snow leopard. Any?
PS it dosn't show up in Disk Utility either...
View 3 Replies
View Related
Mar 31, 2010
I am unsure if I my DVD drive on my iMac cause do dual layers.
View 2 Replies
View Related
