im just wondering if there's a way i can modify the 2.0 that appears on the "About this MAC" and also when i click the "more info..." button...
reason: i have a snobby sister who got her self a 2.4 version and i just want her thinking i also have a 2.4 version
TRUST ME SHE DOESNT NEED THE BACK-LIT lights... as i've turned them off on her macbook (n she hasnt noticed since)
I was trying to get battery info so I was looking in "system profiler" and thought I might like it in the dock. However it appeared to be placed behind the dock on the desktop, so I just "right clicked" it and said move to trash. When I did that I decided to go see if I could find system profiler in my apps or whatever, and it was gone. So I went to trash and hit "put back." It went back into its original folder, but it also went back onto the desktop. How can I remove it from the desktop?
View 5 Replies View RelatedSomeone else pointed out in another thread that on the 11" MBA with 4 GB, if you look in System Profiler under memory, the software says that there are two RAM slots. I can confirm that on my MBA. So:
1) Is the same true on the 13" with 4 GB RAM?
2) Has anyone published a tear down of a 4 GB model just to be absolutely sure that there is only one soldered RAM slot? (I know it's unlikely that a second one got crammed in there, but I'd just like to see the tear down picture)...
I got a camera, Nikon Coolpix S230, but It wont show up any where exept System Profiler, So I cant get the pictures off it. I am on a Early 08 Macbook on Snow leopard. Any?
PS it dosn't show up in Disk Utility either...
I just received my new MBP with i7 processor.
What I understood is that the os should recognize 8 cores because of the 4 cores with multi threading. The system profiler however, only shows two.
Was I misinformed or is something up with the hard/software?
Check the pics - how can i restore this or bring it back up?
[URL]
this morning my iSight was working...and now, a few hours later it is not. is there anywhere i can go to look at this? i tried looking in the system profiler and didn't find anything.
View 1 Replies View RelatedNew member. Just got myself a new MacBook pro i5 15' to replace my old MacBook. I noticed when I opened the system profiler under ATA it said no hard drive was present or selected or something to that effect. Everything is running beautifully on the machine but I was just curious why nothing showed up. Any ideas?
View 1 Replies View Relatedwhen I go to memory in system profiler for my mac pro it coms up with serial number manufacturer,pn,is this correct info?im having amnesia about this jsut want to clarify if this info always shows up
View 1 Replies View Relatedhow do i edit the system profiler stuff? This is what it says for my system profiler on my macbook
notice the "mac pro" and and the user name is wrong, its not JD, its Jon
This also show up on the log in screen. How do I reedit this?
I am a new Mac owner and still wandering around in OSX, but I have a question. In System rofiler>Software>Applications, every application has 2 listings. Some have what looks to be a previous and new version, and some have both listed as the same version. Is this right? Why is this?
View 2 Replies View RelatedI am unsure if I my DVD drive on my iMac cause do dual layers.
View 2 Replies View RelatedI was just browsing through System Profiler yesterday and found a 'WWAN' option in the left menu bar. I've never seen this before, but could this be a suggestion that there will be built-in 3G in the future?
This could mean something else though, I'm not really familiar with WWAN capability.
When I log into my System Profiler, I see that I have three items listed to StartUp. These items I do not use.
Now when I go into System Preferences > Accounts > Login Items, these items are not listed.
When I go into my Library, StartupItems is not listed.
I've have run a search for StartupItems on the entire machine but it's not located anywhere. Does anyone have an idea on how I may remove these items from my Start up?
So just out of curiosity I was messing around in system profiler tonight and happened on the firewall tab. Never really took a look to see what it said until tonight. I have stealth mode enabled, and have ever since I installed SL but the profiler seems to think otherwise?
View 15 Replies View RelatedJust tried holding 6 & 4 on my mini during boot-up, it took a little longer to boot the first time (building cache?) and when I checked the system profiler, 64-bit was active!
View 22 Replies View RelatedNo System Profiler in my Applications Folder. Where is the System Profiler ? There seems to be none on the whole disk -
Info:MacBookPro, Mac OS X (10.7.3), missing application
Check the pics - how can i restore this or bring it back up?
[URL]
I posted my G4 Powerbook on craigslist, and, after filtering out the nigerian scammers, I received some legit-seeming inquiries, a couple of which requested I print my system profiler information as a pdf and send to them so they could see how the machine is set up. One of them had an @apple.com email address, so it seemed like it was probably not a malicious request.
View 8 Replies View RelatedI thought nothing of it until I started rebooting and STILL couldn't get the computer to see it.
I've tried the drive in all 4 of my internal bays and looked to see if shows up under BootCamp but no luck yet. My other internal drives work in any bay slot, so I don't think it's a fault with the MacPro.
As far as I know, it's spinning up and isn't making any dead-drive sounds I've heard in the past, it just seems to be invisible to the computer.
While helping somebody with their eMac I discovered that System Profiler lists the Serial Number as "-", i.e., just a dash
View 9 Replies View Related I purchased a black MacBook (10.4.11) last may and it's my first Mac. Thus far, I have only had one problem and that is that my I can't see my Motorola Z6m in finder or disk utility (but it is in system profiler). I also do not see it in Terminal under /Volumes. Inside the phone is a 2GB Verbatim microSD card that works fine in my card reader on the same machine. On a side note, bluetooth works fine.
The phone works as expected in the PCs I've tried it in, including a parallels vm running XP on the MacBook (I don't have access to any other Macs) which led me to believe it was a formatting issue, but then the card shouldn't work in the card reader either and it should still show up in disk utitlity. Am I not correct?
I have tried rebooting, unplugging/replugging the device, removing the battery, and reinstalling OS X (I wanted to do it to get rid of Unsanity's APE anyways). I have plugged it into either port on the MacBook with the same result. I have also emailed motorola tech support. Additionally, I have done quite a bit of googling and have found other people with the same issue, but none of the suggestions have worked for me or were otherwise unworkable (some suggested downgrading to 10.4.9).
I have also heard of trying it in a powered usb hub, but the thing is, why does it work through the virtual machine if a powered hub is required? Or am I missing something in this?
Someone switched off the power to my iMac the other day. Since I've rebooted:a] System Profiler shows no awareness of FireWire ("Unable to list FireWire devices" in red) b] Every boot takes about five minutes, 3+ of which seems to be spent waiting for a response from the FireWire socket (the logs show a 3-minute gap followed by a line that goes something like this:"/usr/lib/exec/hidd: Timeout waiting for IOKit to be quiet")
c] if it's idle long enough to go to sleep, it goes into a kernel panic (the last line in the log before the panic says"kernel[0]: IOPMSlotsMacRISC4::determineSleepSupport has canSleep true")b] looks connected to a], but I can't see any connection with c] (apart from the reference to IO).
see attachments.
Again: Everything works, I'm wondering if this is normal though.
I'm just posting for the archives my success with installing Windows Server 2003 R2 with SP2 Standard Edition on a Jan 2008 Mac Pro (8x2.8 GHz, 4 GB RAM). I've installed Server 2003 a Mac Mini (1.83 Ghz), MacBook (Late 2006) and an iMac (early 2008) and didn't find the information available online to be greatly helpful, so hopefully this post will help somebody like me sometime in the future. To set up Windows Windows Server 2003 R2 on a Jan 2008 Mac Pro:
Boot OS X and run Boot Camp Assistant as usual. Install Windows Server 2003 R2 SP2 as usual (comes as 2 discs, but only requires the second disk upon your first successful log in so this isn't a problem with bootcamp). Eject the Windows installation CD in the windows explorer by right clicking the D: drive and selecting Eject.........................
I like being able to use the F-Keys on my keyboard to perform the assigned special features printed on each key (brightness +/-; Spaces; Expose; iTunes Playback Controls; etc) without having to press the 'Fn' modifier key to do so.However, when I work in Photoshop, I've always used the F-keys to run Actions and to execute menu items, and having to tack on the 'Fn' key to do so is a series buzz kill (especially when you consider I already use multiple modifier keys along with the F-keys in Photoshop - for example Shift+Cmd+F2 might do something like add a Hue/Saturation Layer... when you complicate an already complicated shortcut by making it Fn+Shift+Cmd+F2, the shortcut basically becomes to complex to use in real life...Anyone know of a third party System Preference Pane 'haxie' (or something along those lines) that would allow me to configure, on a per-application basis, the 'Fn' modifier key and whether or not it will be required for single button usage of Apple's various special features, or for standard F-Key functionality)?
View 1 Replies View RelatedI use my top right corner for flicking of my screen when I need to, really useful for saving energy in class and if I'm listening to music while travelling and sleeping.
The only thing that annoys me about it is, there's no option to set a key to wake the screen. I mean, when using it travelling or in bed, it would be great to use the volume and next/previous keys on my macbook keyboard without waking the screen. Maybe a terminal tweak to make it ignore a few keys, or having a specific key binded to wake the screen that anyone knows about?
I've been working to get a document camera plugged into my computer, and I just got it working via a Canopus box. The Canopus box takes the s-video and sends the signal through firewire to my Mac. But the image is upside down. Flipping the camera around would be very inconvenient... is there any program I can get that will allow me to invert the video signal? Also, what's the best way to display a video signal on the screen? I'm using screen capture software so I want the video image on the screen while I'm recording. So far I have only figured out iChat --> Video Preview. It seems to me there should be something more handy... with maybe a few zoom buttons, reflect image, that sort of thing.
View 9 Replies View RelatedI'm trying to help out a friend here - he has a stock Early 2008 Mac Pro (Dual Quad-Core Xeon, 2.8 GHz) with stock 2GB RAM (1+1 GB). We just installed an additional 8 GB (4+4) from Newegg.com, and the problem is that the Mac Pro system profiler now recognizes only the new RAM but not the old RAM; System Profiler states that the Mac has 8 GB (it's supposed to state 10 GB). We used a chart from Apple's website to make sure the sticks are installed properly in the right slots. Any ideas about why the Mac isn't recognizing the original two sticks anymore?
View 4 Replies View Relatedi got an old lacie d2 aluminum CD-rw 52x24x52x cd burner today from a friends of mine. It turns on, spins the disk and whatnot. It wont show a blank disk (or any other disk for that matter) in the finder menu. iTunes wont recognize that the thing is plugged in. Im using it on a powermac g4 running 10.4.11 on it.
View 1 Replies View Related