I purchased a new iMac a month ago. Often, the keyboard just stops working and the computer has to be restarted for the keyboard to work again. Another problem: Unless I plug my printer in with a USB, the Mac does not pick it up. The printer is a fairly new HP Officejet J5780.
View 6 RepliesI'm yet to figure out a pattern, but my Macbook Pro's keyboard will just stop working for several minutes at a time at random points in time...Even if I hit caps or num lock, they don't turn green. Sometimes it'll just happen once every few hours, but I was in class the other day and it would work for a minute, then not work for a few, than work for another minute, etc.
View 3 Replies View RelatedI have my Canon iP4200 printer hooked up to my iMac and have been using it for years with out any problems until today. When i try to print something nothing happens. In the Printer queue application thing in the dock, it shows the document in queue and its status is "printing". On top of the window it shows this message: 'GenericClass: waiting for device' whatever that means i assume thats the issue but have no clue what it means. I have so many things to print for uni and need to get this working again, how do i get it back to working order again??
View 5 Replies View RelatedMy macbook pro keyboard and my silver Apple bluetooth keyboard (primary keyboard) randomly stop working in Finder can anyone explain? Heres the details:
I usually use my wireless keyboard, and when this happens the keyboard keeps working with everything else, and only stops working in Finder i.e. I can't edit the names of files or even click through files with the arrow keys. (the Macbook Pro keyboard also stops working-only in Finder-during these times too as I just tested..)
Also, Finder keeps working its not frozen or anything, I can click around in it with the mouse and open files/apps, etc.
This has only happened approximately 3 or 4 times (I've had the keyboard since the new ones were released and the computer for 1.5 yrs)
Lastly, when I restart the OS (10.4.11) the problem disappears for a week or more..
I have some strange problem after updating my MacBookPro4,1 to 10.5.7. After a while (can be a few hours) the trackpad and keyboard stop working. When I then put the MBP to sleep and wake it up, both work again but only for about maybe 5-10 minutes. This can be reproduced (put to sleep, works for 5min, put to sleep, works for 5min, etc.) When I reboot it works again for some hours.
View 9 Replies View RelatedI have noticed that my keyboard will randomly stop working after switching Spaces or using other shortcut keys. When I hit the CMD-arrow key to switch spaces, the Spaces box that shows which space you just moved to stays on the screen and the keyboard completely stops working. A logout of required.
Running 10.6.2 with all updates applied.
So I've set up (or tried to anyways) a network between my MacBook Pro & iMac through a Time Capsule. My iMac is connected through a cable and the laptop is wireless. The printer is connected to the USB port on the T.C.
Here's the scoop, I can connect both computers wirelessly on the network no problem but the printer is not recognised by the iMac whatsoever. Now I know I could probably disconnect the cable on the iMac and it would probably recognise the printer but is there a way to fix this issue and leave it connected by the cable?
Both computers back up to the TC w/o issue, I don't see why the TC cannot facilitate printing via a cable since it obviously communicates to the computer w/ Time Machine. Is there a setting to fix this? I have to admit I'm kinda new to setting up networks and working w/ them.
The last few days my keyboard and mouse have stopped functioning at random times on my macbook. I am running snow leopard. I have to shut the lid to put it to sleep and wake it up to get it to respond.
View 1 Replies View RelatedThis is the most obnoxious computer problem I've ever encountered. I'm yet to figure out a pattern, but my Macbook Pro's keyboard will just stop working for several minutes at a time at random points in time. Even if I hit caps or num lock, they don't turn green. Sometimes it'll just happen once every few hours, but I was in class the other day and it would work for a minute, then not work for a few, than work for another minute, etc.
View 15 Replies View RelatedMy keyboard continually stops working. I have replaced the batteries several times.
Info:
iMac
I have an obscure brand USB keyboard that I am trying to use with my Mac Mini, with one problem: after the Mini goes to sleep and wakes up again, the keyboard doesn't work. The solution is to either unplug and replug the keyboard or restart, but both are I think unnecessary hassles.
What I like even more is that the keyboard will wake the Mini (by pressing the spacebar or something), but won't work after that.
I also tried a plain ol' Apple keyboard, which works just fine after sleeping/waking.
Any ideas on what's going wrong, or how to fix it without replugging/restarting? It's just a keyboard, so I don't see why it should pose as any real problem after waking, so buying a new keyboard is not quite what I am looking for. I may end up doing it anyways (a wireless one to go with the wireless MX1000 I am using) but at the moment I don't want to spend money for a new keyboard.
It's a 1.66GHz Core Duo, 512MB RAM, 60GB HD, OS X 10.4.10.
I have been having a problem where randomly after switching a space the little graphic that pops up to show which space you're switching to gets stuck on screen, though you are still able to switch spaces. Also, the keyboard ceases to work as well. The only fix I've found is fast user switching to the login window and back to my account. I'm not able to trigger the problem, and it definitely doesn't happen everytime I switch spaces, but its been happening multiple times per day and is a pretty big nuisance. Also unrelated question: In my itunes using column view whenever I select an artist it snaps back to the top of the list, though still selecting the artist. Its a weird bug, anyone else having this happen?
View 1 Replies View RelatedMy Apple Wireless Keyboard is haunted. It will randomly, in the middle of sentences, or sometimes after I haven't used in a few minutes, stop responding.
The really weird part? I open System Prefs, click Bluetooth, and viola! It works again. I don't have to do anything - just open the Bluetooth prefs. As soon as I do, everything I've typed since it went dead (usually just a word or two) is actually output into the search box in Systems Prefs.
There is no rhyme or reason to this weirdness. Sometimes it will literally happen a few times an hour for days (which drives me up the wall); sometimes it'll go months without doing it. When it's doing it a lot, no amount of rebooting/relogging-in fixes it. One thing I have not tried is using a fresh user account (or Guest), because it's so unpredictable... even on my own account it will take a break and work normally for a few hours, then go right back to freaking out.
The fact that it stores everything I type when it's "not working" is the really weird part. It's like the OS is receiving the data but just forgetting to process it until I poke it and remind it, "you have stuff coming in via Bluetooth, wake up and do something with it!"
I got a brand new Macbook Air the other week. I noticed that sometimes, after folding the computer (with the OS running), then unfolding it - the keyboard and trackpad are not responding at the login screen. Actually if I press the keyboard it lights up properly but there is no access to the system. The only thing that works is the power button, so every time I have to power down the computer, then back on again.
Info:
MacBook Air, Mac OS X (10.7.3)
On a day-to-day basis I run: Adobe PS, INDD, and AI, Microsoft Entourage, Firefox and iTunes. Just recently, after an upgrade to Leopard, I added Things and Simplify Media to the list.The problem that happens before (on Tiger) and now (on Leopard) is command+tab switching stops functioning and Expose hot corners and shortcuts stop working.
I'm pretty sure this isn't a Finder crash because before, on Tiger, I could quit+restart Firefox and everything would be back to normal. Almost as if some shortcut had causes the system to act differently or there was some app dissonance?
But now, with Leopard, nothing I quit will cause these two features to act properly until I do a restart. Both features (command+tab switching and expose) are very necessary for my work flow. I have checked SysPref to make sure keyboard shortcuts are default and Univeral Access to make sure assisted devices is turned off.
I have just started to have problems every time I go to sync my wifes and my IPhones, IPads and IPods. I-Tunes recognizes the units, begins to sync and shuts down ITunes every time I try and sync. I have reset our phones and have all the most current versions of ITunes and my accessories OS.
View 1 Replies View RelatedAll of a sudden the other day, my Verbatim USB flash drive just stopped being recognized... it had been mounted, a TM backup made to it when all of a sudden I got an error stating that it had been improperly removed... it was like I had yanked it from the USB port.I tried unplugging it, reconnecting, rebooting, moving it to another computer... no luck. it doesn't even show up in Disk Utility Verbatim has agreed to replace it under warranty but I'm wondering if there's anyway that I can mount it again to retrieve the TM backups.
View 8 Replies View Relatedthe top row of keys, "q through o" are not working. the left shift also is unresponsive.
View 5 Replies View RelatedI tried an SMC reset and all. It was working, system locked had to reboot, and then a looking for bluetooth keyboard dialouge came up on restart. I got out of that, worked with mouse for a while, then realized my usb keyboard was not working. I reset SMC, tried different USB ports, Everything.
Info:
Mac Pro, Mac OS X (10.6.8)
I've noticed that occasionally my IR sensor stops working, and no longer responds to changing the volume, skipping the track in iTunes, etc. It can be resolved by going into Security prefs, disabling and re-enabling the IR sensor. This is annoying, however, and I'm wondering if it's a known issue that might be fixed.
I noticed that when you disable and re-enable the IR sensor, the last few remote button pushes you made while it was broken come through in a burst.
I got a new MacBook Pro with 10.7 (updated to 10.7.3 now). I'm running the printer through Airport Express's USB.It was working fine, but at some point, I'd get the interminable "Finding printer". I could be misremembering though,and maybe it never worked with 10.7, though I think it did!
I tried to deselect the printer driver and re-select. I stupidly deleted the driver (or perhaps just removed it from the Print & Scan window? and now I can't get it back again (via the HP site). The HP site maintains that the driver comes with 10.6 and I assume the same works with 10.7 -- is this a correct assumption.
[url]...
Info:MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
Suddenly, my HP Photosmart 7525 isn't recognized by my (wife's) iMac. Ny iMac prints to it wirelessly just fine. I downloaded the printer driver (several time), loaded it and the iMac reverted to the HP Utility to finalized the process. The utility couldn't recognized the "device" to finish off the driver. Same thing when I loaded the Photosmart 6525 (my printer). The iMac apparently isn't loading the drivers. It worked fine a day or two ago, now, nada. WiFi works fine thru the AirPort/TimeCapsule module/router. The printer wifi works with other computers.Â
Info:
iMac, OS X Mavericks (10.9.3), HP Photosmart 7525
I've noticed after upgrading to 10.6.5 that my keyboard will not work when I come back after an extended period of time away from the machine. At first, after applying only the 10.6.5 update, neither keyboard nor mouse would work unless I unplugged and replugged the keyboard (the mouse is connected directly to the KB). Later, I installed the combo update, and then the mouse worked but the keyboard still wouldn't. This is after my display sleeps - as long as I continue to use the computer, everything works fine. I have a mid-2009 Mac Pro 2.66 GHz quad-core (Nahalem) but with the older (clear, G5) keyboard and a mighty mouse.
View 2 Replies View RelatedI have an iMac 27" (intel 3.4 GHz, Intel core i7, and 16 GB memroy) purchased a few months ago. It is running the latest version of Lion 10.7.4 I run this computer on our network along with a iMac 24" 3.5years old and a Macbook Pro 2.5year old.Â
This computer seems to have a beef with the Hewlett-Packard printer (HP colour laser jet CM1312nfi MFP) which I have had for about 3 years. I can not get the new computer to work with the printer properly. It allows printing but it pauses all the time when you resume the print it starts printing from the begining of the document againIt will pause any prints sent to it across the network after the first 1 or 2 pages are printedIt won't allow scanning at allWhen you launch the scanner it takes forever to connect (3 - 4 mins)If you try to scan using any of the scan options (if it loads the devise) it then states it can not connect to the device, or all the scan buttons apear but greyed out.This is odd as it will still allow printing??Â
Also, all the other PC's have the same version of Lion 10.7.4 and have the latest HP Driver installed (these were released on the 14 Dec 2011). Other useful infoThe scanner is hard wired to the 27" machineYou can only use the printer if one scanner is hard wired as it does not have wirless capacity.I have uninstalled and installed the software more times than i can count trying all different trouble shooting etcI can only conclued that there is somthing the 27" machine is doing to prevent the scnanner registering properlyNone of the other computers can use the scanner correctly either. As you can only scan a page at a time using the "Scan" button. If I wish to scan multiple pages on with either of the other computers I need to use the "scan to folder" button.Â
I just used an OSX Server v 10.5.0 DVD to upgrade a computer (1.6 ghz G5 tower, 1.5GB RAM) from osx 10.3.9 server. When I get to the 'Serial number' panel, none of the fields will accept any keyboard input. The keyboards worked prior to the upgrade. They work fine on another mac. The eject, volume, and caps lock keys all work. Just the fields themselves in the Serial Number (and the registered to, and organization) fields are ignoring input.Â
Info:
iMac, Mac OS X (10.6.8), 3.06 GHz intel core 2 duo, 10GB RAM
I have a MacbookPro - it's just over a year old. I mostly use it for graphics, but lately I've been having trouble with the keyboard - it intermittently stops typing. This problem occurs across all programs in which I use the keyboard. If I leave it alone for a few minutes it will start typing again, but obviously this is very inconvenient.
Info:
MacBook Pro (Retina, Mid 2012), OS X Mavericks (10.9.2)
I have an Epson NX 510 printer that I have been able to print on easily up until a few weeks ago. I have upgraded my Macbook Pro to OS X Lion so I got new printer software and still my computer wouldn't recognize the printer all the time. Sometimes I can print and sometimes I can't. What can I do?
Info:
MacBook Pro, Mac OS X (10.7.3)
I recently upgraded our iMac OS to 10.7. Now the computer doesn't recognize the Epson Workforce 845 printer. I uninstalled the printer in system preferences. Now what do I do to install the printer again and use it wirelessly?
Info:
Mac OS X (10.6.8), 3.06 GHz, Core2Duo, 4GB 800 MHz RAM
My computer will start running really slowly and then the keyboard stops working, then after 30 seconds or so I lose the ability to click but the mouse still moves. Command-option-esc for force quit still works some of the time though but refreshing everything from there doesn't help. After I reboot everything goes back to normal. This has happened every other day or so for about a week.
Info:
MacBook, Mac OS X (10.6.8)
I' finally getting around to boot-camping my last generation Mac Mini running Leopard. I got the partition created just fine and the XP disc booted just fine. Now for the problem: When I'm giventhe option to install, repair, or quit Windows XP Set-up, I can't select anything. My keyboard, an Apple Wired USB Aluminum, isn't recognized.
View 5 Replies View Related