I just got the HP LaserJet 1010 printer. I've installed it yesterday with the HP Foomatic/hpijs driver for CUPS from linuxprinting.org. I have it shared, so that I can use it from my Windows laptop - printing from my laptop works fine.
When I try to print from an application runing on my Mac Mini - nothing prints out, and the following can be found in /var/log/system.log
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies View RelatedI have problems to works my hp laserjet P1005 on my mac, I have installed the CD provide with my printer and I have installed too the drivers from the official HP Web page, but my printer it's no working yet. I want to know how I can do works my printer if it's possible.
View 1 Replies View RelatedDoes anybody know if there is a USB parallel adapter that would work for my HP LaserJet 2100 to hook up to my new iMac?i read a couple of recommendations for other models, but not specific for this my printer and mac. They are all around $40 with no free shipping, so I would hate to spend money on it, and it not working, and i could have just invest in a new printer.Thanks for any advice.
View 6 Replies View Relatedlaserjet 4mv won't print from indesign cs3
View 6 Replies View RelatedThis past week I have had serious problems trying to get my Imac to print to a HP Laserjet 4100. Parallel port to USB.Driver version 18.4 THe Imac is less than a year old and runs on Lion. I have had intermittent problems ongoing but this time it keeps showing messages -Not connected.
Usually when I go into preferences and click hold, on and off a couple of time or delete document and try again it would work OK but this time I have deleted printer, reset printing system etc numerous times and it still does not print.Sometimes when I unplug and re-plug in the USB connection it does not even recognise the printer is plugged in.
I have tried connecting the printer to a completely different computer and it appeard to work ok so it does not seem to be the cable at fault. Does anyone have a similar problem and more important does anyone have a solution.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)
I just upgraded to Lion and pdfs won't print. It doesn't appear to be the printer driver, because the printer works with others apps. It's an HP Laserjet 1300. Yes, it's old, but still works, well, sometimes. just not with pdfs.
Info:
iMac, iMac, OS 10.7.3
Upgraded my iMac to 10.6 Snow Leopard. Can't print to my hp LaserJet 1012. What is the fix?
Info:
iMac, Mac OS X (10.6.8)
I just installed 10.5.3 and now my HP Laserjet P10006 wont print anymore...when I look at the print window the file loads but then after a few seconds its stops.
I've tried printing from Acrobat and preview to so avail. I installed the new 1.0.5 HP driver and still no luck.
The printer is connected and works as I've sent test prints through no problem.
So is this a 10.5.3 problem that has arisen or is it something on my side I am overlooking?
bought another (have one already) HP laserjet2100 with 600N network card exactly the same as an old one I had which works fine when connected to tiger macbook pro intel and old G4 with 9.2.2However when put new printer into ethernet network at first could not see printer but this was sorted using HP Direct and assigning IP adress on Intel mac. Howver when I print I get code on first page followed by masses of blank pages.To solve this I downloaded ghost and gimp printers and managed to get it to print.However quality is really poor when compared to old printes fonts are jagged etc. Any ideas to get it up to speed with exactly same machine?
View 6 Replies View Relatedi have a HP colorlaserjet 2840 (network)printer connected (fixed ip adres, cable) to a router. Have a windows laptop and an ibook (macOsX tiger) connected wireless to the router. Can print fine from the windows laptop to the printer. Internet and email work fine on both the laptop and ibook.
Can anybody tell me how i can get the ibook to print (wireless) to the printer. I allready downloaded the driver from the HP site and try to add the printer through Ip printing. This appaers to have gone allright but when i try to print nothing happens, I don't see a printjob in the cue.
I've found it impossible to do double-sided printing on HP laser 1010 as it does in windows XP. Tried downloading latest drivers from HP-website without success, the option not available in printing window.
View 3 Replies View RelatedI have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.
Is there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies View RelatedWhen I print multiple checks they print in the wrong sequence. If I have checks 401, 402 and 403 in the printer in that order, they print 403, 402 and 401. How can I change this to print not collated?
Info:
Mac Pro, Mac OS X (10.7.4)
I'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
I have had difficulty in attaching my HP Photosmart C5580 printer to my new MacBookPro (OSX 10.6) through my Netgear WGPS606 print server. After much searching I found previous posts here which advised me to add the Gutenprint driver 5.2.6 which I did. That finally DID successfully attach the printer through the server.
However, there is a lag of many seconds (sometimes minutes) between the SEND command and the starting of the printer. Is this the new normal that I need to expect or is there a fix?
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
The Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
i'm trying to print some stuff off using adobe and some parts are printing, but some aren't. I've had this problem before i would print of some formula sheets for my finance class and basically if it wasn't a letter it wouldn't print it off but now it's taking out a lot more.
in the first picture you can see how i went through and wrote the stuff in, wasn't that big of a deal.
second picture is one page from the file that printed out fine
third picture, the entire top part is supposed to have a paragraph on it.
I have a HP LaserJet 1020, I would like to use it with my Macbook Pro, however, HP doesn't make a driver for the Mac. Anyone know of a good place to get a driver for this printer?
View 1 Replies View RelatedI have a 13' Macbook Pro running 10.6.5. I also have an HP Laserjet P1102 (works fine on my windows machine) connected via USB. Now I just need my Macbook to communicate with the damn thing. I downloaded a huge HP driver package from Apple's website, installed it (took up 700megs of space) but it still doesn't detect the printer when I go into System Preferences to ADD printer. Are there certain steps I have to do or recite some kind of voodoo incantation to get this to work?
View 1 Replies View RelatedI need quite a bit of help here. Can somebody post for me detailed instructions on how to properly install the drivers for the HP Laserjet 1020 on my Macbook, such that it will print out documents without glitches?
View 21 Replies View RelatedHas anybody installed an HP LaserJet 1000? I'm trying to do so onto an iMac, but not having any luck.
Been to the HP website and searched for drivers; they only show Windows drivers available for download. I downloaded some sort of generic program from HP, "HP LaserJet for Mac v5.5.2". It ran and installed some sort of stuff onto my Mac, and the Mac physically recognizes and identifies the LaserJet 1000 by name when I am in >System Preferences >Print and Fax > + ["add printers"], but the "Print Using" dialog box just reads "Please select a driver or printer model".
Auto Select does not work, and if I search through the list of built-in printers in Leopard (...>Print Using: >"Select a driver to use..."), a bunch of HP LaserJet models are listed, starting with the 1010 and incrementing upward. But no HP 1000.
Anybody successfully installed or using the HP LJ 1000?
How does one add an HP LaserJet 4000N to a TimeCapsule based network with systems running 10.7.4? I had it working fine with a PowerPC based iMac; however, although I have the correct driver and have the printer hardwired to the network, it does not appear on the network, e.g., you do not see it in the Add Printer lists.
View 1 Replies View RelatedI've found out the hard way that Snow Leopard does not support the same printers as Leopard did and now I'm stuck. I spent the better part of the day researching how to get my HP LaserJet 4m Plus to work with the new OS and got nowhere. Can anyone tell me what I can do to get the printer to work with the new OS? The printer may be old but it functions flawlessly and only has about 50,000 impressions made, so it still has lots of life. I have it hooked up via ethernet and the cable is run under the floor to the other side of the office so adapting a serial/USB would not be doable or practical. I don't have the money to blow on a new printer so I would really like to make this work somehow. Any help would be much appreciated.
View 2 Replies View RelatedI have problems using my new HP LaserJet 1018 printer together with a mac mini. After looking on the net I found the printer program: foo2zjs, but since I am new in the Darwin/Unix world I had problem with the installation.
View 7 Replies View RelatedSo I installed Leopard, which went amazingly well, everything I have seems to work pretty well (including Cisco's VPN and Parallels)...my HP LaserJet 3055 All-In-One will print, but it will not scan.
View 2 Replies View RelatedI've been hearing preliminary reports that all the workarounds for the 1020 do not work?
Before I install SL, I was wondering if anyone actually got their 1020 to work.
