Need some tech assistance. Changing over from a PC to a Mac G4 for my home computer. Would like to use the MAC equivalent of Remote Desktop Connection. Present set up on my PC is handled by clicking on a icon which takes me to the remote server.
View 2 RepliesI run a UMBP @ home and also have a work laptop connected to my LAN. I want to remote into my work laptop from my UMBP, but I am having trouble doing so. My work laptop has joint to the company domain and has Group Policy applied. However I made sure all the remote desktop firewall rules are open and I still can't remote into it. Work laptop is running Win7. My dad's pc is also a Win7 and I can remote into just fine.
View 2 Replies View RelatedI'm trying to set up a RDC over WiFi. Both laptops are on the same WiFi network. I installed the latest RDC sw on my mac and I'm logged on as an admin on the other laptop which is running Windows XP. From My Computer > Properties > Remote > 'Allow remote assistance etc' is ticked. From the 'Advanced' tab I also ticked 'Allow this computer to be controlled remotely'. I temporarily switched off the Zone Alarm firewall on the Windows laptop. I launched RDC, I type in the IP of the Windows laptop (which is a generic 198.162.x.y) but nothing happens. I even tried to type in the laptop name but nothing happens either. The RDC cannot find the laptop. I checked that all the services starting with the word 'Remote' on the Windows based laptop have been 'Started'.
View 14 Replies View RelatedOutside of VNC and LogMeIn, is there a way to remote into another Mac from a Mac? I've found a lot of results regarding remoting into a Mac from a Windows PC, but not from Mac to Mac.
View 1 Replies View RelatedIs it possible to remote a pc from a mac and if I can what applications can I use?!
View 3 Replies View RelatedHaving an issue with RDC, it works connecting to Windows machines with the IP addresses but wont work with the names of the machines, I have dynamic IP's in my house so need it to work on names , anybody have any issues like this as I cant seem to figure it out?
View 2 Replies View RelatedIs anyone using the MBA with Remote Desktop Connection? I am concerned that the program I would be running remotely may be be too small to read comfortably. I have only used it with my iMacs, and have never seen it run on a MB or MBP.
View 2 Replies View Relatedthe app "Remote Desktop Connection" installed itself when I was installing Office 2011 on my Mac.
How do I use this to access my Windows PC?
I've followed all the instructions exactly as they are written and it still fails to connect every time, I'm trying to connect by typing my PC's full name into the space.
i just got a mac and am trying to figure out how to access a remote desktop connection for my work. on a pc, i went to the start menu, communication, and there was an option called 'remote desktop connection.'
when i clicked on that, microsoft outlook opened and there was a box for the ip address at my work. i filled in the ip and then i logged in with my work username and password.
Rite as by the title i'm trying Remote Desktop Connection to connect from my Mac to Pc.
How do i go about doing this?
i have my pc's name kieran-pckieran , when i place this in the field on my mac's RDC it says failed.
I got my mac pro in england and right now I am in denmark sitting here with my macbook pro trying to control it. I setup Logmein client before I left which is working fine but the lag is annoying me, and I was wondering if there was a better solution so, I enabled "remote desktop" on my macpro and sitting here with apples Remote desktop trying to connect to the IP of my place in england (not the internal, the proper external) and as usual I can see I can connect to it, as its a public "student" residential area, I know I cant access the router but I also know they have not blocked any ports including the 5900 port which is required.
So is it my "DNS" which is blundering? Coz I can see when I make the remote desktop under the sharing tab, does it not create a dns "submask" - and if thats true. When I put that in to DNS I still cant connect any fancy or fantastic solutions? I don't mind a browser based client such has logmein, but one with a more "fluent" use would be wonderful, as i wanted to work on it live.
I just downloaded Air Display to use my iPad as a 2nd monitor with my 21 inch iMac. I use Remote Desktop Connection to remote in to my work computer. I was hoping to be able to move my e-mail client to the iPad, and do most of my work on the iMac.
Info:
iMac, Mac OS X (10.7.4)
I have a studio with a nice desktop with 3 screens. Trouble is, through the winter I'd rather be working near my fireplace. I could move the desktop, and have this huge monster in my pretty room, or I could hook up one monitor to my laptop and use remote desktop. So my question is... how is remote desktop for serious work? Mostly graphic stuff, layout, etc. Would I need an upgraded router for it to work well (currently have only an a/g airport express, maybe need a/g/n?).
View 2 Replies View RelatedI need to remote into my office (PC) from my mac pro at home.
View 8 Replies View RelatedI am having problems getting RDC v2 to work using my Windows7 computer name.
I am able to get to the computer through the IP address with no problems.
I would like to use computer name as I am on a DHCP router and the IP changes often.
I am new to MAC OS. I am using MAC OS version 10.5.6.
Apart from ssh login and VNC ( I could do both) from Window computer to MAC computer, I want to have remote Desktop connection from Window XP to MAC PC ?
When I trying to to start->Programs-Accessories->Remote Deskop Connection on Window XP and enter the MAC PC IP address, I am getting error message as :
"This computer can't connect to the remote computer. Try connection again......"
VPN (PPTP) in 'NETWORK' pops up: "A connection could not be established to the PPP server." PC's using the same IP address password and internet connection get in just fine. What should I check? Connecting the same way getting on the internet here at work were the PC I am trying to connect with works just fine. VPN(PPTP) connects and Remote Desktop takes me to the PC's desktop just fine. I have tried from home with both my mac laptop and imac desktop, neither will connect but PC users have no problem connecting remotely.
View 1 Replies View RelatedHaving problems with program that connects to my office. I get message that states ' power pc applications are no longer supported."
Info:
iMac, Lion
I'm trying to use Apple Remote Desktop to connect to multiple Mac's on a remote network. I've set the remote network's firewall/router to open up the ARD-specific ports for all the computers I want to connect to. I've also set each computer to accept Remote Management. On my ARD however, when I enter the network address of the remote network I'm trying to get to, I can only see ONE of the enabled computers, rather than all.
View 1 Replies View RelatedI'm looking for a system that can track about 50 MBP's providing both remote wipe as part of an overall security protocol, and also remote screen/desktop for admin purposes. I looked at preyproject.com but it looks like they only do remote wiping/tracking. that I don't want something locked to a single user, it should be centrally managed.Â
Info:
MacBook
Pro, Mac OS X (10.6.8)
I have a PC connected to a 5.1 channel 1000W Speaker system, and I know there are options for remote speakers in iTunes, is there a way to set it up so I can select songs on my MacBook's iTunes, and have the sound come through the PC's Speaker System, even a third party program or whatever?
View 1 Replies View RelatedI recently bought the 2010 mac mini with the apple remote and I am very happy. I am having a little bit of trouble using the apple remote. Every time I turn on the mac mini I need to go to preferences and change the options of Candelair for the apple remote to work properly with Plex. I mean. I turn on the mac mini and the apple remote wont work absolutely. I need to get the magic mouse and go to preferences and change some options. It seems that this is the only way to "activate" the Plex functionality.
What I want is just to turn on the mac mini and immediately open Plex with the apple remote without needing to use the magic mouse or going to preferences. Is this possible? There must be a way to control the mac mini and Plex just from the start of Mac OS X. It gets very annoying to use the magic mouse along the apple remote. I turn on the mac mini and if I press the middle button (the one to open Plex with Candelair) nothing happens. As I say, I need to go to preferences and adjust the settings of Candelair and then it works. Why doesn't it work from the beginning?
I just got my new iMac 21.5, works great. I'm a Mac newbie. I have a remote Windows machine I'd like to use as a network drive. I also have a NAS (Netgear SC101T) which I basically don't use anymore, thus I'll use the PC. I have two wireless routers so that function is of no value to me. So IMHO I don't need a Time Capsule.
I'd like to configure Time Machine to use the Windows networked drive as the "Time Capsule". Is this possible? If so, how do I do that? And how does that impact the Restore functionality if I'm not using the $300+ Time Capsule? Will it still restore a dead machine if it comes down to it?
I have a non-fixed IP with BT for my home network and am curious if I can set things up to access my home machines and volumes when I am abroad. A step-by-step guide to this process would, no doubt, be useful to a number of MR members. If there is a kind soul who could post an idiot-proof set of instructions that would be great, and would perhaps be put up as a user guide here at MR.
View 5 Replies View RelatedI have followed the instructions, on the boot screen I selected the appropriate option to remote disc boot via wireless connection to my iMac to OSX. Well its been 15 minutes now and still it has not booted into the OSX setup screen. It just shows a "no smoking" type symbol, and a little circle like its doing something and the iMac Remote Install Mac OSX app just says "Waiting for MBA to startup"... but its taking so goddamn long! How long is it supposed to take to reach the OSX setup screen over wireless?
View 1 Replies View RelatedWe are looking at putting a new Mac desktop in upstairs, a little way from our electric piano which is downstairs. Now presuming we've got a long enough cable, could we link the piano to the Mac then control the Mac through a remote desktop connection using a Windows XP/7 PC.
View 4 Replies View RelatedI use VNC around my house to access computers remotely. While I can access my Windows machine from my Mac, I am having trouble accessing my Mac from Windows in a reliable fashion.
I am now using VineServer on the Mac and TightVNC on the PC, but after a while it will become unresponsive, and require frequent re-connects and refreshes.
Apple's Screen Sharing is amazing running from Mac to Mac, but I don't have an extra Mac for downstairs at the moment.
Is there a way to access OSX's built in screen sharing from a PC? Or a better server for Mac or client for PC that will give better connectivity?
Is there a way to use ubuntu from OSX via remote desktop? Sometimes I prefer use gnome instead of the shell for admin my home-server.
View 2 Replies View RelatedWhat do you guys use? I'd like a simple web-based solution, if possible.
View 7 Replies View RelatedI'm thinking about getting an MBA and using it as a primary computer. My HTPC is pretty powerful and so I was hoping that I would be able to control is via Remote Desktop to do any heavy lifting I need to do. Is it a problem to run remote desktop wirelessly?
View 1 Replies View Related