How can i configure my computer to have highest priority and all other computers linked to the network with limited bandwidth? Other people on my network seem to be abusing their privilege.
View 1 Replies
Intel X25-M 160GB, how do I find out if it has the latest firmware v1.5 from Dec 8, 2009. And is the Solid State Drive Toolbox v1.3 from Mar 22, 1010 worth downloading?Intel's download/support page doesn't tell you how to know if your SSD has the latest firmware or not.
View 8 Replies View RelatedI was travelling and added a firmware password a few months back, I now want to disable this to install Ubuntu on a partition of my MacBook - but there are no directions how to in the utility.I looked at the Apple doc I originally used to set the password: [URL]/HT1352, and I cannot find a companion document for taking it off. So, if anyone knows how I go about doing this,
View 2 Replies View RelatedJust received SuperDrive Firmware Update 3.0, MacBook EFI Firmware Update 1.4, and AirPort Client Update 2009-002 1.0 on Software Update for 13" Unibody MacBook.
View 2 Replies View RelatedI have a powerbook, and im tryin to get my wireless internet workin with my linksys wireless router....but i need some sort of password encryption cause apple reads things different from windows...
View 7 Replies View RelatedI have an Airport extreme broadcasting in N only connected to my modem. off of the AE i have a linksys 54gs that i installed dd wrt and running that as a bridge so that it can broadcast G only. i must have changed the IP address because when i am on that G network (each router has different SSIds) i can no longer access the linksys/dd wrt prefs with the default 192.168.1.1 get what the Lan ip is now on that router? i would have to have to reset
View 1 Replies View RelatedHow long do these routers usually last for? I've had mine for less than a year and I believe it died today.
For the pasta few days I've had to unplug and plug back in to get a connection and today - nothing.
When I set up the iMac I continued to use my trusty old Netgear WGR614 router which always worked fine for my PC and iPhone WiFi connections. Is there any benefit or downside for that matter if I swap out the Netgear for the AirPort Extreme Base Station? What about switching to the the Linksys WRT54G as this seems very popular on this forum?
View 6 Replies View RelatedI was getting tired of my belkin54g router that kept dropping connections, so I went and got a new linksys wireless G router. I popped in the CD, followed all the instructions and when I get to the end of the install it says that the configuration was successful, but it could not verify an internet connection.
I figure it's just a hiccup and try to connect with my laptop via airport- success! I get my homepage. But then, I can't get to any other page at all.
It says it can't find the page, but my network connection in system preferences says I'm connected. I go to my desktop which has the hardwire connection and I can't get on the internet at all, but again, my network connection in system preferences says I'm connected- green light, IP address and all.
So I figured I did something wrong and restored the factory settings on the router. Same thing happens again. WTF? This should have been easy. What the hell is wrong with this thing?
It should be noted that if I type in my IP address, the router info comes up immediately. I am also just connecting my modem to my desktop to post now. My internet connection works fine.
I'm new to Macs. I live ~200 yards from my Mom's house. I set her up with a b/g/n router. My Imac picks up the "n" signal just fine. My ps3, which only does b/g, gets no signal. I have an old linksys wrt54g wifi router. I tried plugging it into my imac and setting the imac to internet sharing through ethernet, but it didn't work. Stringing an ethernet cable isn't an option. Am I missing a step in the system preferences for internet sharing? Is there another way to get internet to the ps3? I would rather not buy any new equipment, but I'd spend up to $50.
View 2 Replies View RelatedMy router is a WRT54GS with DD-WRT firmware. It works fine with my old eMac (w/ original airport) and every PC in my house, but not with my new iMac (w/ airport extreme).
At first I thought I might need to power cycle it, but it didn't work. Then I thought it might be conflicting with something, but that wasn't the problem. On a side note, I also have a WRTU54G-TM for VOiP phone. It works with both Macs equally, unlike the GS. The only problem with that one is it will randomly kick my Macs off the network and I end up turning off airport and turning it back on when that happens.
I have a Linksys WRT54GS wireless router and I want to set it up with my iMac running Leopard. I have search around and haven't found a clear answer.
View 1 Replies View RelatedJust got this router. The wireless is superfast - 25-30Mps. The ethernet used to work as fast (both still ping identically), but now the wireless loads pages many seconds faster than the hard wire. Don't know what happened, maybe I changed a setting, but since both ping the same I can't figure out what to check next.
View 4 Replies View RelatedJust wanted anyone's input as to whether the new linksys (610N) wireless routers are better or worse (speedwise) than an AEBS?
View 3 Replies View RelatedI've a Macbook, PS3 and Linksys ADSL Gateway that can be put in Bridge Mode.Macbook is connected to the internet via 3G USB modem.I was able to tell Macbook to broadcast it's 3G internet connection via AirPort and use it from any other Machine, such as iPhone.
But the problem here, is that I want can't use it in my PS3, because it's the old 20GB model which doesn't have a wireless connectivity.So, I figured out that I might be able to tell Macbook, to share it's 3G internet connection with the Linksys ADSL gateway while it's out in Bridge Mode, and this gateway can send the internet connection to PS3, all using Ethernet cables, as follows:
Macbook --> Linksys ADSL gateway in Bridge Mode --> PS3
But I couldn't make it work.
This is what I've done so far:
1- I plugged the Ethernet cable from Mac to Linksys ADSL gateway
2- I put Linksys ADSL gateway in Bridge Mode
3- I plugged another Ethernet cable from Linksys ADSL gateway to PS3
4- I went to network preferences in Mac and choose the Manual settings
5- I gave the Mac the IP address: 192.168.1.101, Subnetmask: 255.255.255.0, Router: 192.168.1.1 and DNS: 192.168.1.1
6- I went to to PS3 wired settings and gave it IP: 192.168.1.102, same setting with other fields as Mac Ethernet
7- While testing the connection in PS3, the IP check went successfully, and the internet didn't
Note: I do not want to connect Mac to PS3 directly via a croseeover cable because I want to share the internet connection in mac with Xbox 360 as well, which also doesn't have a Wireless connectivity.
I currently have an old technology 2-Wire modem and I hear its not the "friendliest" with Macs. Especially when configured in wireless mode. Thus, I'm thinking of replacing our old 2-Wire with new technology Linksys WAG160N modem/router (for my current 10 Megs DSL service).
[URL]
If you have this Linksys modem/Wireless Router, any good, bad & ugly on it?
After upgrading to Leopard my Mac Book Pro continuously drops the connection to our wireless connection. After many attempts the only method I found to correct the situation is to perform a restart. Before the OS upgrade the wireless connection worked perfectly.
I am connecting through a Linksys router with a Time Warner cable connection.
i really want a new iMac but can't afford it right now. so i was thinking of getting an older iMac to replace the pc we have now. if i do do this can i use the wireless router that i have now with an iMac G3 or G4?
View 6 Replies View RelatedI was looking at getting a new Airport Extreme base but I'm not sure if it will work with my 15" G4 Powerbook at all? I currently have a Linksys WRT54G which is OK but is such a pain to set up when it does happen to crash once in a while too. Besides, I don't think I'm getting the most powerful signal I can get too. Besides saying that the new wireless "N" has 5 times more speed than the wireless "G", is it worth it to switch over from a linksys to the Airport Extreme?
View 4 Replies View RelatedAnyway, I have a Powerbook G4 that's about five years old. It doesn't have an internal wireless card so I bought a Linksys wireless adapter to plug into the side of my computer when I first got the computer. It worked fine for years. I recently reformatted my hard drive and now when I insert the wireless adapter it no longer will allow me to connect to the internet. I'm aware that Linksys doesn't have drivers for Mac users so I'm kinda confused how I got it to work in the first place. I don't remember installing any third party software, but I may have-- it was a few years ago. what I should do to allow me to use my linksys card in my Mac? I've heard of Orangeware but I'm not sure if that's the solution.
Oh one more thing, when I plug the card in, an icon appears in the top right corner that shows something is plugged into the port but doesn't allow me to click on it and search for wireless connections.
When I connect my iMac directly to my cable modem (no router) I get fast speed. But when I connect my laptop through my Linksys WRT54G v5 router the speed drops to about 20-40 kbps.
View 22 Replies View RelatedI have a new unibody macbook pro and print from it using a wireless hp officejet pro 7410 all in one printer. I have a linksys wrt150n router. My pc laptop prints fast from it but the mac prints very slow. The printing actually stops for a while then starts again. It doesn't seem to do this all the time. I can't figure out what would slow it down.
View 2 Replies View RelatedI just bought a Powerbook G4 from my school and the internet is sparatic but it is just at my house. I went to my friends house on Friday and it worked fine and at my school it does to. When I get home it either doesn't connect or goes from four bars to two bars. I have a Macbook and that works fine with the internet. I have tried re setting the router and nothing works. I have a Linksys router.
View 2 Replies View RelatedI was trying to access my father's wireless network while I was home for a week. I found a utility to configure for a mac (my dad only has Windows), but after running it, and it failed to find the router, my airport will not turn on. The option to "turn AirPort on" is grayed out and cannot be clicked. I have attached two pictures to illustrate. I have restarted twice to no avail.
View 2 Replies View RelatedUsually I am pretty good with this sort of thing but this one has me stumped. Right now I have set up my Linksys AM200 to do all the work and my Time Capsule to broadcast the network in bridged mode. However as I understand, using bridged mode prevents you from sharing the hard drive in the Time Capsule with MobileMe so I can access it over the internet. Does anyone have any experience who could help me switch things around? I have tried but then it does not work. I would need to have the modem bridge to the Time Capsule which would be doing all the work. Right now my modem is set up using RFC 2364 PPPoA. I see that there is a bridged mode only and RFC 1483 bridged. I believe that I should be using some kind of bridged mode. I also searched the forum and saw that it needed to be half-bridged. What would that be?
View 2 Replies View Relatedis there a way that I can lock the linksys Wireless connection from my MBP?
It's been an open connection so users or neighbors around me can use my connection and it seems to be slowing my connection down.
I was looking at how I could secure my connection through my computer?
The Linksys router has a static ip set up to work with the DSL connection and desktop. My macbook pro connects to the router but there is no internet connection! This is pissing me off becuase my mom's cheap Dell notebook connects flawlessly but My $2500 macbook pro doesn't. What do I need to do?
View 5 Replies View RelatedI've always used airport express but lately I've been noticing big drop in speeds when I'm in the upstairs rooms. I do not feel like spending $175 on another apple router, how much trouble is it to go with linksys? How much settings configurations will I be getting myself into?
View 8 Replies View RelatedI'd like to convince my computer that every stupid network named "linksys" it stumbled across is not a known network. My computer will preferrentially connect to these worthless and slightly dubious networks before my own speedy, password-protected network. I cannot find an option in settings to remove "linksys" from trusted networks.
Info:
MacBook (13-inch Late 2009), Mac OS X (10.7.4)
i want to know how instal Linksys router WRT54G in Mac Os x Snow leopard 1.6
View 4 Replies View Related
