Hardware :: Calibrate 24" LED Cinema Display And 17" Macbook Pro Screens?
Dec 24, 2009
I have a new 17" macbook pro (glossy screen) and 24" Apple LED Cinema Display, and I'm trying to calibrate each monitor. I'm currently running the Monaco Optix XR and can create some very good looking profiles, each to his own. But, I can not get the monitors close enough in color temperature when they are side by side. The 24" is slightly warmer than the macbook pro display.
I was considering picking up a Pantone Huey pro since my calibrator is so old, but I've been reading about a lot of problems with those on 10.6.
Has anyone had any luck calibrating these two new monitors with identical (or as close as humanly possible) color and temperature?
I just got the brand new 15" MBP with high res screen, and it is paired with the 24" cinema display.
First thing I noticed is the colors are way off between the two monitors and it is very annoying....I have tried calibrating both with no results, they just have way different profiles to be able to match them.
had to get a dvi to make my older screen work. now when I close the powerbook. and start up it defaults to my power book. will not turn on my screen. Called Apple and did the display screen mode and it can not find it? but will work about every other week?
I have purchased a macbook pro and have been using illustrator and Photoshop to design posters. I then purchased a Epson artisan 1430 printer. And the colours are way off. The screen colors are lovely and vibrant and the print colors are much more dull. I have been told I need to calibrate my macbook to the printer settings?
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.5)
i've been reading about these screen threads, that some of the new macbooks have faulty screens or display, it got me worried because i purchased a new 13" macbook pro ..how would i know if mine is faulty or not ?
On my macbook pro, when I'm on my home screen I can use my tracking pad to flip my screen to a screen that displays all of my widgets. Is it possible to flip to a third display screen to place documents on?
I want to use Colormunki Photo to calibrate my iMac 27" display but the software states that I must first reset the display to the default settings before continuing. Please could someone tell me how to do this.
I am actually trying to decide if to get the old 30" cinema display or not.I'm a graphic designer and my fear is that apple will never make a matte display...Here in Italy it's still sold in the apple store. I have the unibody macbook pro, and so I've been reading through reviews now for a week ... my biggest concern is the dual-link dvi adapter... I still see posts (August or September 2010) with people experiencing issues, even with the firmware 1.3!I wanted to ask you people if I should go for it or dig the 27 inch even though it's glossy... I have a few people in the office (also graphic designers) working on iMacs and got used to the glossy.
The title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
I own 23 and 30" Cinema Displays. I like the 23 because everything is larger and easier to read than in the 30". I mostly work in Logic and love that I see lots of things on the 30" but the 23" is much easier on my eyes.Is there such a thing as a display with 2560x1600 (like the 30" Apple) but that is LARGER than a 30 inch so I can see everything bigger in Logic??? Maybe a 34 or 37"? Did a search but haven't come up with anything other than other 30" displays.
As the title says, I need a new monitor for my old G5 as the old monitor for it went bust. Apple does not make the old displays that came with the unit anymore and the only available monitor is the new LED ones ? but they all come with mini display ports
I am looking for a display to use with my Powerbook G4 12". I am in love with the 30" cinema display, but according to technical support today, my setup is not compatible (supposedly, but the person on the phone didn't sound to sure). I have a mini DVI, but the 30" requires a dual DVI. I think the 23" display requires DVI, which I can attain with an adapter. Does anyone have suggestions for what I can use with my computer? The bigger the better for me. Also what do you think of the older (plastic case) apple displays?
Purchased a brand new 27" i7 imac a few weeks ago, display is awesome!!! I was using my old 28" LCD monitor from my PC and running dual displays on the iMac. The 28" LCD monitor annoyed me a bit because i could not get the same color/crispness/brightness that i got from the iMac. ( also it has a Matt screen and i am more into the glossy screens ) So i found a used 24" cinema display locally. Paid 600.00 and it came with 2 yrs of AppleCare. It is only 7 months old ( still have 5 months under orignal warranty ) Got home, hooked it up and it had a "hint" of yellowness to it, It wasn't a exact image of my iMacs display...I tried to calibrate it also, but it still had just a HINT of yellowness....Nothing at all major, but enough for me to be annoyed with it.
I have a 2008 Mac Pro with ATI Radeon 2600XT and a 30" Cinema Display. I am considering buying a Wacom Contiq 24 HD screen/tablet and would like to know if the Radeon 2600 will drive both or will I need a second graphics card? If so, do I buy another 2600 or can someone suggest something suitable?
Info: Mac Pro (Early 2008), Mac OS X (10.7.4), 30" Cinema Display, 10Gb RAM, 2 Tb
I am contemplating an upgrade from my 2.2 / 4G MBP with 128M VRAM, as i find that it often chokes on simpliest HD movie files created with a DSLR (weekish video), regardless whether I use it with or without the 30 inch Cinema display. So, I am curious how the new Air will run an external monitor, and whether it has enough juice to at least display the HD movies shot with a DSLR without dropped frames/jerkiness. (I guess I am asking two questions in one).
This is sad I don't know this, but I've only used Macs for a year and have only used a Macbook. This weekend I bought a cinema display to go with it. I plugged in the DVI cable, but was expecting there would also be a cable from the display into the wall socket? The display has four cables coming out of it, the DVI, USB, firewire and another. I clicked the display's power button, but only get a black screen.
I am thinking of updating my home studio setup which is currently running a Macbook pro 13" 2.26 with 4gb of ram. I was first thinking of upgrading to an iMac with a 3.06Ghz processor and 27" display. However, I now think I might be ok staying with my MacBook and upgrading to one of the two displays;- The 30" Cinema display- Or the 24" Cinema LED displayAt nearly half the price I am leaning towards the 24" display. I am using logic and ableton. What does everyone think and anyone had any experiences running logic and or ableton with a MacBook and display.
I bought a new 24" LED Cinema Display today but once I got it home I found that it doesn't want to charge my MacBook's battery. It said "Not Charging" when I clicked the battery icon in the menu bar but I really thought nothing of it. Then, while I was transferring files from my external HDD to the MacBook everything just turned off completely. I feared the worst and when I tried booting my MacBook it simply would not turn on. It seems like the Cinema Display had bled my MacBook dry - it had no charge in the battery and I had to do an NVRAM reset to get it to charge again over the power adapter. Still when I connect my Cinema Display to the Magsafe it does not charge the computer, yet it does charge fine when I connect it to the MacBook power adapter. Seems like a faulty Cinema Display to me, but it was an 80 mile round trip to the store to buy it, I don't really want to have to go back. Has anyone else had this problem?
I'm thinking of picking up the 27'' when it arrives, but I don't know how I'm going to be able to use the speakers in the new display? My MBP doesn't have MiniDisplay Port with audio and I don't think that the display has any ports to connect something else? how/if I can make audio work?
It's a June 2009 Macbook Pro. 15'', 2.8Ghz stock model.
I have a new Macbook Pro runing OS X 10.7. I want to connect it to my old 20" Cinema display (aluminium one that I bought with a G5 around 7 years ago). I've got got the Mini Display Port to DVI adaptor, but this doesn't seem to work - it won't detect the display.
I have an old "apple cinema hd display" ... how do I connect to my new mac book pro. The cord coming out of the display is one big cord that turns into 4 cords (1. power, 2. firewire, 3. usb, and 4. the monitor plug that has 2 sets of 9 prongs and 1 dash). I just got a refurbished macbook pro 2.3 GHz Intel core i7 built in Feb 2011.Any ideas how to connect..On another note ... with my wireless apple mouse, what was once swipe down meant scroll down on the screen ... now it's swipe down is scroll up ... is there a way to reverse that? Â
Can I use my 27" Cinema Display with a 2012 MBP with Thunderbolt? The 27" Cinema Display is less than a year old but with the DVI cable, USB, and charger.
have been looking around online on how the best way to connect my new Mbp that arrives tomorrow to an old apple LCD cinema display that my dad managed to save from redundancy from one of his work clients. (am being given the screen).
I know there is a mini display port to dvi adapter sold by apple but it has very negative reviews, and wondered if anyone has any better suggestions for a way that i could connect it?
I'm trying to set up a MacBook (White) and 30" Cinema Display - I'm using an Apple mini DVI to DVI adaptor. The max resolution I can set the macbook to run at is 1280 X 800 and the Cinema display looks all blocky and not good - I know the macbook is not capable of running the 30" displays native resolution of 2560 X 1600 but I thought DVI could go up to 1600 X 1200? I installed the 30" cinema display software / drivers - Is there anything else I can do in Tiger to increase the maximum external display resolution?
So my buddy brought over his first-generation-aluminum 20" cinema display. I have a DisplayPort to VGA connector, and a vga-dvi converter, and I plugged the cinema display into that. Nothing is showing up on the cinema display - it's just black.
Im planning on purchasing a Samsung 2494HM 24" 1080p LCD monitor w/ HDMI input. Will this work with the new 13" mpb perfectly? and if it does what extra stuff do i need. I googled "macbook to lcd display" but the results were so scattered that I didnt know where to start. would the samsung monitor look just as good as the apple cinema display or would it look good but not as good. redundant i know hah.
