I have a 2008 Mac Pro with ATI Radeon 2600XT and a 30" Cinema Display. I am considering buying a Wacom Contiq 24 HD screen/tablet and would like to know if the Radeon 2600 will drive both or will I need a second graphics card? If so, do I buy another 2600 or can someone suggest something suitable?
Info:
Mac Pro (Early 2008), Mac OS X (10.7.4), 30" Cinema Display, 10Gb RAM, 2 Tb
I have been having an issue with my display lately and think it might be because of my graphics card. The display shows a "tail" of whatever is on the screen. So if you are looking at an edge of a window, that window edge will trail off to the side, creating a sort of ghost image. So I tried disconnecting the monitor and I plugged it into the other slot. That seemed to fix the the "Tail" temporarily. But, it made certain portions of the screen blurry. There are literally blurry patches. So I tried switching the connection again, and it just moved the blurriness.
Also, this is my second ATI Radeon HD 2600! Could it be a graphics card issue and if so, should I switch to the Nvidia option?
I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
View 2 Replies View RelatedThe ridiculously long thread title pretty much says it all. Is it possible to buy one of Apple's ATI Radeon 4870 cards with the mini-display port connection, install them in a PC, and then use the LED Cinema Display with a PC?
View 24 Replies View RelatedThe title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
I own 23 and 30" Cinema Displays. I like the 23 because everything is larger and easier to read than in the 30". I mostly work in Logic and love that I see lots of things on the 30" but the 23" is much easier on my eyes.Is there such a thing as a display with 2560x1600 (like the 30" Apple) but that is LARGER than a 30 inch so I can see everything bigger in Logic??? Maybe a 34 or 37"? Did a search but haven't come up with anything other than other 30" displays.
View 2 Replies View RelatedAs the title says, I need a new monitor for my old G5 as the old monitor for it went bust. Apple does not make the old displays that came with the unit anymore and the only available monitor is the new LED ones ? but they all come with mini display ports
View 3 Replies View Relatedif i Connect my Macbook air to the apple Cinema Display through thunderbolt is the air getting power supply through the Display?
View 1 Replies View RelatedI am looking for a display to use with my Powerbook G4 12". I am in love with the 30" cinema display, but according to technical support today, my setup is not compatible (supposedly, but the person on the phone didn't sound to sure). I have a mini DVI, but the 30" requires a dual DVI. I think the 23" display requires DVI, which I can attain with an adapter. Does anyone have suggestions for what I can use with my computer? The bigger the better for me. Also what do you think of the older (plastic case) apple displays?
View 1 Replies View RelatedPurchased a brand new 27" i7 imac a few weeks ago, display is awesome!!! I was using my old 28" LCD monitor from my PC and running dual displays on the iMac. The 28" LCD monitor annoyed me a bit because i could not get the same color/crispness/brightness that i got from the iMac. ( also it has a Matt screen and i am more into the glossy screens ) So i found a used 24" cinema display locally. Paid 600.00 and it came with 2 yrs of AppleCare. It is only 7 months old ( still have 5 months under orignal warranty ) Got home, hooked it up and it had a "hint" of yellowness to it, It wasn't a exact image of my iMacs display...I tried to calibrate it also, but it still had just a HINT of yellowness....Nothing at all major, but enough for me to be annoyed with it.
View 6 Replies View RelatedAs you can tell by the thread title I've got one of the latest model iMacs and I'm running an LED Cinema Display as a second monitor. When it gets to the late hours I like to watch some movies on the Mac so I figured the Cinema Display would be a nice addition to do the job.
Now here's my issue: if it's late and I'm watching movies I tend to not have any lights on, but having one of the displays on means having both of them on, what I'm wondering is if it's possible to sleep one display while allowing the other to stay active so I can watch the movie without the light from the other one distracting
I am actually trying to decide if to get the old 30" cinema display or not.I'm a graphic designer and my fear is that apple will never make a matte display...Here in Italy it's still sold in the apple store. I have the unibody macbook pro, and so I've been reading through reviews now for a week ... my biggest concern is the dual-link dvi adapter... I still see posts (August or September 2010) with people experiencing issues, even with the firmware 1.3!I wanted to ask you people if I should go for it or dig the 27 inch even though it's glossy... I have a few people in the office (also graphic designers) working on iMacs and got used to the glossy.
View 11 Replies View RelatedRight now i'm using Apple Cinema Display 20" that i bought at the end of 2005. You know, the aluminum one. But i've taken interest in one of those LED Displays, especially the 24"...
Now, i've read that the LED Display uses glossy display compared to the Cinema Display? Also, it's completely my own opinion, but the older Cinema Display seems to be looking more nice also having one-coloured.
The technical specifications are in favour of LED Display of course, but taking into account the glossy display, less attractive design and so on... Which one would you get?
I am thinking of updating my home studio setup which is currently running a Macbook pro 13" 2.26 with 4gb of ram. I was first thinking of upgrading to an iMac with a 3.06Ghz processor and 27" display. However, I now think I might be ok staying with my MacBook and upgrading to one of the two displays;- The 30" Cinema display- Or the 24" Cinema LED displayAt nearly half the price I am leaning towards the 24" display. I am using logic and ableton. What does everyone think and anyone had any experiences running logic and or ableton with a MacBook and display.
View 4 Replies View Related24"/27" cinema display (2010 display) can this be connected with PS3.
View 4 Replies View RelatedI just received my new Mac Pro on Friday - it shipped with 10.5.4 installed. After looking at some of the new features of Leopard (had only used Tiger previously), I installed all the available updates -- these were:
Mac OS X Update 10.5.5
Aluminum Keyboard Firmware Update 1.0
Java For Mac OS X 10.5 Update 2
iTunes 8.0
Digital Camera Raw Compatibility Update 2.2
QuickTime 7.5.5
Remote Desktop Client Update 3.2.2
Front Row Update
All the updates were successful and no issues were apparent until Sunday afternoon. The fan on the graphics card (ATI Radeon 2600 XT) now seems to be running at full speed, regardless of what is running. Just idling at the Desktop the fan still runs at full speed. A reset of the SMC has been done and a diagnostic as been run (no problems found). Is anybody else experiencing this? If it helps anyone, I've also posted my temps below:
Ambient Air 24.0C
CPU A Temperature Diode 34.0C
CPU B Temperature Diode 35.0C
CPU C Temperature Diode 35.0C
CPU D Temperature Diode 35.0C
CPU A Heatsink 32.0C
CPU B Heatsink 32.0C
Hard Drive Bay 1 28.0C
Hard Drive Bay 2 26.0C
Hard Drive Bay 3 27.0C
Hard Drive Bay 4 27.0C
Memory Bank A Point 1 35.0C
Memory Bank A Point 2 33.0C
Memory Bank A Point 3 34.0C
Memory Bank B Point 1 35.0C
Memory Bank B Point 2 37.0C
Memory Bank B Point 3 35.0C
Memory Module A1 48.0C
Memory Module B1 48.0C
Northbridge Heat Sink 38.0C
Expansion Slots 35.0C
Power Supply Location 1 46.0C
Power Supply Location 2 40.0C
Also, I did some reading and it seems that this issue has happened to others after they appllied the 2600 XT update from Apple. The update put their firmware at version .252. This is the version that is already installed on my card.
What I don't understand is that why for two days the fan never ran at full speed. It just suddenly started happening Sunday afternoon while I was burning some data to a DVD - the fan hasn't slowed down since.
I have a 2008 Model Mac Pro with the original HD 5770 Gfx Card as well as a new HD 2600 XT to connect a total of 4 screens without issues.But the HD 2600 XT actually has 3 outputs (2 Mini-DVI and a DVI), but when plugging 3 screens, 1 will always go blank.Is there a way to connect the 3 screens at the same time to that card?
Info:Mac Pro, Mac OS X (10.7.3)
i own a 27" i7 iMac. I currently use a Hanns.G 28" LCD monitor that i used for my PC but not use it as a 2nd display for the iMac. Everything works great actually but the displays colors are just to different and tend to annoy me. The iMac is Clear, bright and Crisp, The Hanns.G is matt finish screen and though its bright, its a bit washed out looking and no matter how hard i try to adjust the Hanns.G in the monitor settings i cannot get the colors to look the same as the iMac. So i was thinking about getting a 24" ACD ( found one used w 2yr apple care, local for 600 ) and was curious will the display ( color, brightness and crispness ) look the same as the iMacs display?if i come out of sleep or standby, the Hanns.G looks really nasty until it warms up )
View 6 Replies View RelatedUpdate keeps telling me the Firmware for the 2600 is available even when I install it. I have 2 cards.
I have an early 2008 Mac Pro 2.8 that came with an ATI Radeon HD 2600 XT video card. I'm thinking about upgrading this to something with 512 MBs of VRAM. What GPU for the Mac Pro is a good value right now?
View 13 Replies View RelatedI have been having this reoccurring issue on just one of my screens. My right screen/main screen on my Mac Pro 2.8GHz seems to go dark on me, only in a few programs though. Safari and Lightroom mainly as those are the ones I use mostly on that screen.
It seems to happen once in a while, when it has been running a good bit which is why I thought it was the video card, too hot or something.
I wish to get a more powerful graphics card for my 2008 24" iMac. My card is an ATI Radeon 2600 XT. It is supposedly (according to photos and YouTube videos) a small square chip board, screwed to the underside of the logic board, with a large cooling assembly (fan box with long copper tubing going to the square chip board) which also is screwed onto the GC board, the cooling system being removeable. The chip board is small and surely must carry a 'type' name, as like PCS, etc, but I havent found a name. Could it be CDB? At any rate, I need a modern card that can run the newest OpenGL systems. Does anyone make a card that will fit and replace the 2600 XT? How does one search for a retro fit upgrade card? Â
Info:
iMac 24; iPhone 3Gs; iPad 3G, Mac OS X (10.6.4), Mac Enthusiast
Where I can find driver updates for my ATI Radeon HD 2600 XT? How can I check to see what driver version I have? I am running 10.6.8. 2x2.8 Ghz Quad Core Intel Xeon.
Info:
Mac
for some reason ATI Radeon HD 2600 XT graphics with 256MB card doesnt support 1920x1200 under windows vista via bootcamp and only picks up the dvi on one of the 2 dvi.
View 4 Replies View RelatedI've been digging up info and found a few sundry scraps, but any insightful personal experiences would be HIGHLY welcome. I'm getting an 8800GT upgrade for my Mac Pro. Since I'm considering driving more than 2 monitors, I'm considering adding it to the existing HD 2600 XT, instead of replacing the previous graphics card.
Any caveats I need to be aware of? Can I simply install the 8800GT on the 2nd-bottom slot above the HD 2600 XT? (It'll take up 2 slots, right?) Will this perform alright under Mac OS X and Windows Vista? Any power issues I should be aware of... or is it better to avoid the hassle and remove the HD 2600 XT, replacing it with the 8800GT?
I purchased my Mac a few weeks ago, wanting to both upgrade my computer.......and play Diablo 3. I do always want the best out of my systems and the person who sold me the mac told me it would be fairly easy to upgrade the card...well he was wrong. He also told me a few days later not to worry about upgrading since the system is already great.
I went to a local Mac store and asked about the upgrade and found out it would be close to or above a grand for the part from Apple and the labor.
Heres the breakdown:
$875 - Card
$130 - Labor
$15 - Shipping (from apple)
Are there any other ways to find this part online cheaper and just hopefully pay for the labor?
I just really dont want to pay a grand just to upgrade my damn video card, and I know within the new year Apple will release a much better fast computer and I'll be mad. I really wish it wasn't such a hard upgrade.
I have the stock video card from my g4 mdd 1.42ghz
its 64mb
agp
ati radeon 9000
1 dvi
1 adc
what i know: the 1 dvi can push relatively big monitors. to make dual display work i need a adc to dvi converter. what I dont know. can this card drive 2 19" monitor maxed out ? (1400x900)?
So I have an Early 2009 Octocore 2.93 and I have a flashed ATI Radeo HD 4870 video card that is supposed to work on a PC but its flashed so it works on a mac. I know its not officially supported but the issue im running into is that the operating system cannot recognize the full resolution the HP LP3065 30 inch display is capable of. The display can run up to 2560x1600 on any other system but not with my ten thousand dollar machine. The windows side can display at the full resolution but Snow Leopard can only run 1280x800 and it makes the OS look like a pile of dog **** on sunday.
Anyone else run into this issue?
Heres the link btw to where this guy shows how to flash the card.
[URL]
On Spec in support only MacBook, MacBook Air, and MacBook Pro systems with Mini DisplayPort can we use it with our mac pro
View 11 Replies View RelatedI need a cinema display but the new is expensive, apple will release a new 20 inch? I wait for see? or buy a used cinema display 20inch? by the way any store that still sell new ones?
View 4 Replies View Related