I purchased a Dell 2209 WA ISP monitor, and connected it to my Macbook Pro via a DVI to DVI connection. My Macbook Pro has a GE FORCE 8600 T graphics card.
The text is quite blurry on the Dell. It is at 1680X1050 native resolution, which is supported by Macbook.
I purchased a dell monitor a few weeks ago (s2409w), but returned it because it had a defect. I was thinking about buying a new monitor, the Dell ST2310, but I recall that on the old monitor text didn't seem as sharp as it did on my PC. It almost seemed a bit blurry.
I had it hooked up to my MacBook Pro via DVI as the main display, running at its native resolution of 1920x1080.
I read somewhere that it may have to do with the monitor's ppi, vs the MacBook's ppi, or something like that. Is there any way to remedy this problem before I buy this new monitor because I'm fearing that it will have the same problem as my old one.
I have a new Macbook Air 13", 4GB RAM, 2.13Ghz, 256GB SSD.
I'm connecting the Macbook with the Apple Mini Displayport to DVI connector to a DVI cable to a Dell 2407 monitor with a resolution of 1920x1200. The resulting image is blurry. The fonts are blurry and drop shadows on the screen flicker quite badly. The resolution on my Macbook is indeed set to 1920x1200 to match my Dell 2407.
Does anyone know what the problem could be? Is the problem with the Mini Displayport to DVI adapter?
I know for a fact that the Dell LCD and the DVI cable work fine with my Windows 7 box. I have tried two different DVI cables as well.
I just recently got a Samsung P2450H 24" monitor and I've connected it into my MBP with a mini Displayport > HDMI adaptor and with a HDMI cable. I've changed the default setting from AV to PC in the Samsung Monitor menu as recommended by others on this forum, and now I'm getting the maximum 1920 x 1080 resolution available on both Windows 7 and Mac OS with no overscanning issues etc. Everything fits on the screen. However, the text and font on websites looks a bit jagged and a bit blurry on Mac OS and I'm not sure why. If you stand far away, it's not that noticeable, but sitting at a reasonable distance (say 2 feet), you can definitely notice it. It just doesn't look that sharp in general.
People have said HDMI connections don't work that well on Samsung Monitors and I'd be better off with a DVI connection, but I can't see why there would be a discrepancy between the two modes. Which leaves the other reason - that this is an inherent issue to do with all Samsung P2450H models being affected with Mac OS, and not the cable itself? Has anyone experienced the same issues I've just alluded to? Perhaps I'm just being pedantic, but I'm pretty sure blurry/jagged text shouldn't be a characteristic of this monitor.
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
View 3 Replies View RelatedI have a macbook pro and when I connect it to my external ASUS VH226H, 1920x1080 22" moitor all the fonts except the ones that are part of the OS not in external software are really blurry and rubbish. I've used the following apps and it all looks terrible: Coda, Firefox, Safari, Adium, Adobe CS5. I've tried changing the font smoothing options via terminal and it has made no difference.
View 6 Replies View RelatedI've been searching for a vertical laptop stand for awhile now, since I use my MacBook Pro and my Dell Inspiron both in clamshell mode and connected to the same monitor. There were some pricy options out there ranging from $40 to $300, and then I found the perfect solution at the thrift store today for $1.50: a napkin holder.I bought one very similar to the one pictured here, and will be sanding it down and painting it black. It works extremely well as a vertical stand, and I'm getting a second for the Dell. Forget overpriced stands and repurpose something
View 20 Replies View Relatedwhen I connect my macbook unibody with dvi to my dell monitor the quality of the screen is not as "good" as when I connect my windows pc to it. Is this only a problem on macbook, or is the mac mini the same?
View 2 Replies View RelatedI recently bought a couple-year-old Dell 22 inch monitor (model SP2208WFP) and I'm having trouble figuring out the best connection to use. I have a early/mid 2010 MacBook Pro and the monitor can connect via VGA, DVI, or HDMI. Connecting via VGA is terrible - text is incredibly unclear and hard to read on the external monitor. Connecting via HDMI is much better in text clarity, but the colors are weird such that I can't see most pictures because they're too dark. Connecting via DVI seems to be the best option - colors are the correct color and the text clarity is fine, but still a little jagged with smaller text. I've tried using the calibrationg assistant in System Preferences on my Mac, but that seems to make things worse.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.7.3)
I hooked up my macbook pro to a mini display port to a dvi -> hdmi to my tv no problem. However, when I hooked up the mini display -> dell monitor, I get nothing. The screen is black. The weird thing is that my macbook pro recognizes that a second monitor is plugged in... it just won't display anything
View 9 Replies View RelatedWhen I close my macbook pro whilst it is connected to an external monitor the internet connection slows down?
Info:
Mac Pro, Mac OS X (10.6.7)
I have a mid-late 2008 MacBook connected to a Dell U2211H monitor using a Mini DisplayPort -> VGA connection.
When I use 1920x1080, I only get 60 Hz and the display is a fuzzy (text). Also, there are black bars. Why?
Will my issues be solved using a Mini DisplayPort -> DVI connection? Or should I exchange it for the 2209?
I purchased a 2.2 GHz Mac Mini today and connected it to my Samsung 720 p LCD TV via mini-DVI to HDMI adapter. I've already adjusted to remove overscan but all text on the screen is blurry. By blurry I mean it has ragged edges and looks "chunky." It's not good. Text looks clean and crisp on high-def TV channels. Photos look decent. Even YouTube videos (HD) look pretty good. But the text is awful. My display settings are 720p so it displays at 1280 x 720 @ 60 hz. If I plug in my Dell laptop, the same TV defaults to a 768 x 1360@60 hz display and looks great. I've tried all the display settings ranging from 480 p up to 1600 x 900.
View 4 Replies View RelatedI need to give my boss a reason as to why when he uses universal access zoom text on our website becomes blurry ( he did this by mistake). If I don't give him a good enough reason I will have to "fix" the problem.
View 6 Replies View RelatedI had the above printer connected to my old and newer computer. I got another printer and decided to sell my 7350. Nothing was wrong with it and I just got cartridges for it. I sold it for $20 and later that day the woman who bought it from me told me that for some reason she could not get the printer to print right and sent me a picture where the text was blurry and unreadable. Her laptop recognizes the printer and I told her to clean the cartridges, print a test page, etc. and still the printer is not printing well.
View 1 Replies View RelatedTogether with my MBP I also purchased a MiniDisplayPort to DVI to hook up my external monitor. The graphics on my laptop are really sharp, especially with the glossy screen. Yet, for some reason, the graphics on my Samsung-monitor are extremly blurry. Compared to the MBP my 22" Samsung 226 BW seems to be very unsharp and lacks colour.
View 2 Replies View RelatedWhen I hook up an external monitor to the DVI output, and use both the macbook screen, and the external, the display on the external is blurry, and not very sharp. However, when I close the macbook, and run it in clamshell mode, the external becomes very clear, and crisp (like it should). I never use dual monitors, so this really isn't a problem, but want to know if its normal. 2007 Macbook Pro, 2.4, 4 gig ram. Gforce 8600M GT
View 1 Replies View RelatedI finally did it... After a lifetime of Windows I've leapt from the Dark Side and am LOVING OSX... the combination of Spaces and Expose alone will save me countless hours!
I just got the VGA adapter to connect my spangly new MBP to the large monitor I used to use for my PC (no DVI capability on the large monitor, Acer x223w). Now however, I'm getting a strange and inconsistent problem:
If I connect all the cables and then power up, both my large monitor and the MBP screen appear slightly but infuriatingly blurry (see screenshot, left-hand side). If I power up MBP without connecting my large monitor and then 'hotplug' it (connecting the cable while everything is turned on), the blurryness is mostly cured - see screenshot right-hand side. The screenshot is from the same monitor in the two different states.
I have a blurry spot in the middle of my imac screen. It is the shape of a kidney bean.
Info:
iMac, iOS 7.1.2
I have a VGA HP monitor that runs at a native resolution of 1680x1050 at 60Hz. I plugged the Mini in, some weird resolution came up. 1680x1050 didn't show up in "Displays". I downloaded SwitchResX, and set it to 1680x1050 at 60Hz.The resolution is now set, but the monitor is very blurry, and the dock extends beyond the bottom of the screen.I really want to get this working. I'm not quite sure how SwitchResX works so could anybody give me a hand?
View 2 Replies View Relatedi have a router connected to my mac via ethernet. With my windows pc the router works as expected but when connected to the mac it drops the connection frequently. Does anyone have this problem?
View 1 Replies View RelatedI have a Dual 2GHz PowerPC with the stock video card (ATI Radeon 9600 Pro) and have had a Dell 2405FPW monitor connected to it via DVI cable and it has worked flawlessly for a couple of years... until this week.
Now the image seems to be "off" by about one or two pixels. Just a bit blurry here and there and when I move the mouse across the screen, the entire screen image seems to shift a little bit.
I've tried power cycling, re-connecting the cable, unplugging everything, resetting the monitor settings in the control panel, factory-reset of the LCD settings..
Information:
Dual 2 GHz PowerPC G5, 2 GB
Mac OS X (10.4.10)
DVI Connection to Dell 2405
I just bought a Samsung XL2370 monitor to hook onto my MBP 15".
Problem: the image is pixelated and blurry green. I can slightly see the background though. Screen works fine on a Windows pc. Before I hooked up a 19" on my MBP and that also worked.
I tried the menu but no luck. And when I choose the auto adjustment a message appears 'not available'.
My Dell printer will not print documents. It says it is not connected and I have sure west .net as my internet.
View 5 Replies View RelatedI have a 2 month old 13" MBP which I absolutely love. The only hitch is that there is an oddity when connected to my Dell 2008wfp display. It only happens when I wake the MBP from sleep. A number of things happen sometimes. Usuaully, when I wake the MBP from sleep, i get a black screen on both displays and all I can see and control is the cursor. Sometimes the main display will be black, but the MBP display will show the desktop wallpaper, but again, I can only see and control the mouse cursor. It should also be worth mentioning that the keyboard is rendered non-functional as well.
Sometimes, OS X will appear on both displays, with mouse cursor active, keyboard inactive, but I am unable to click anything or interact with anything OS X.
Anyway, I'm at the point where I need to mention this because it happens quite frequently and its getting rather annoying. The only way I can get out of this hang, is to cold reboot the machine. It happens everyday and at least 50% of the time I wake the MBP from sleep. When not connected to the display, I never get this occurrence. Also, this display worked perfectly when I used to own the classic 15" MBP, so its hard for me to pinpoint what exactly is the anomaly that is happening.
Anyone else experiencing this same issue? I am using a mini display port to DVI adapter to the Dell display.
Complete Apple newbie actually. Just recently bought a MBP and want to get a large independent monitor while im using it at home. As much as I love the Apple display, I cant afford it at this time. I found a really nice Dell LED monitor that has DVI, VGA, HDMI outputs.
How can I hook it up to my MBP? What connectors must I purchase to make it work?
Info:
MacBook
Pro, Mac OS X (10.7.1)
Can anyone suggest what should I do with Mac Mini 1,83 GHz Intel Core 2 Duo and my two new Dell monitors?I tried them using their standard VGI cables connected to a VGI port on a Mac Mini - both are dead. Not a single flicker.
My Mac bought from a trusted friend and acts as a practically new machine - but not with my monitors.
P.S. I went through several Mac-related forums and there's abundance of issues with "alien" monitors.
I use an HP 17 inch laptop as well. Set up Airport Extreme and everything seems to be working. Is there a way to use my iMac as a monitor for the Dell computer?
I really love this monitor so much I hate to hook the Dell up to my Dell 24 inch monitor and would rather give up that monitor and gain desk space. The only other option is to use a Samsung 40 inch LED TV as my Dell's monitor.
I use the iMac for video, pictures and music. I have Windows 7 running via Parallels but would rather just use the new Dell as a Windows computer and the iMac for personal use.
is it possible with a single Geforce 120 card that comes stock on the mac pro's?
say i want to connect a 24" dell LCD monitor along with a 19" LCD monitor.
can i do it, or do i need 2 graphics cards?
I am in the market for a new display. I was thinking about getting a new dell one, but then again I love the looks of the Apple studio and cinema displays. Do you think it would be a mistake to buy a used Apple display, so long as it is in good condition? I have about $150-200 to spend
