MacBook Pro :: And Dell Inspiron Both In Clamshell Mode And Connected To Same Monitor
Jun 18, 2009
I've been searching for a vertical laptop stand for awhile now, since I use my MacBook Pro and my Dell Inspiron both in clamshell mode and connected to the same monitor. There were some pricy options out there ranging from $40 to $300, and then I found the perfect solution at the thrift store today for $1.50: a napkin holder.I bought one very similar to the one pictured here, and will be sanding it down and painting it black. It works extremely well as a vertical stand, and I'm getting a second for the Dell. Forget overpriced stands and repurpose something
View 20 Replies
ADVERTISEMENT
Dec 14, 2010
Can you run the MacBook in clamshell mode without the power being connected?
View 3 Replies
View Related
Jan 3, 2011
I have used my ultimate 11" on usual mirrored display on battery power and in clamshell mode.
A few hours ago, I was running many apps in mirrored mood and my air just began to lag so badly after an hour. Expose is slow as well as surfing and clicking. I wondered what happened. Then I plug back power supply and close the lid of Air, hence running in clamshell mode. It then returned to full speed.
Please help explain to me if title is true. It is disturbing to learn that plugging into to ext monitor could lag.
View 1 Replies
View Related
Jun 4, 2014
I need to change resolution of external monitor in clamshell mode
View 2 Replies
View Related
Oct 22, 2009
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
View 3 Replies
View Related
Sep 10, 2009
If you connect say a 13inch macbook to a 19inch monitor using the closed clamshell mode, will the picture quality on the monitor be like a stretched out version of the 13inch screen? I.e. poor, or does the macbook just act like a desktop computer and allow high quality viewing.
View 1 Replies
View Related
Jul 24, 2010
At one point I had my external monitor set up to work with windows, so I know how, but since then I have reinstalled windows. I haven't used windows in a long time, so didn't bother setting it back up. Recently, my macbook's screen broke, I can boot into OS X fine by plugging in an external keyboard or mouse, or simply by closing the lid quickly before the primary display loads, thus booting it into clamshell mode using only an external display. I cannot however do this with windows, and since my screen is broken I cannot set the display properties as I cannot see them. Is there any way to either boot windows into clamshell mode or set the display properties using keyboard shortcuts?
View 3 Replies
View Related
Apr 3, 2010
I purchased a Dell 2209 WA ISP monitor, and connected it to my Macbook Pro via a DVI to DVI connection. My Macbook Pro has a GE FORCE 8600 T graphics card.
The text is quite blurry on the Dell. It is at 1680X1050 native resolution, which is supported by Macbook.
View 2 Replies
View Related
Jan 9, 2010
when I connect my macbook unibody with dvi to my dell monitor the quality of the screen is not as "good" as when I connect my windows pc to it. Is this only a problem on macbook, or is the mac mini the same?
View 2 Replies
View Related
May 21, 2010
I hooked up my macbook pro to a mini display port to a dvi -> hdmi to my tv no problem. However, when I hooked up the mini display -> dell monitor, I get nothing. The screen is black. The weird thing is that my macbook pro recognizes that a second monitor is plugged in... it just won't display anything
View 9 Replies
View Related
Aug 28, 2010
One day I was using my MBP open and external monitor hooked up. Everything was fine until the internet went down suddenly while I was using iChat.
My airport wouldn't see a network and after a couple restarts and a few resets my airport finally connected to my network. Once connected it would only issue a self-assigned IP, which obviously wouldn't work.
I was able to get around this by manually entering in the correct info but the speeds were low at best, usually pausing and stalling every minute.
After frustratingly trying get it to work, I entered clamshell mode because there was no reason at the time to have dual monitors. Once I did, viola, the airport kicked in and started working full force. It's been this way for about a month now.
My laptop is a MacBookPro5,1 with a 2.8 GHz processor and 4 GBs of RAM.
I've read that airports will have serious degradation issues if overheated and while that may be the issue, it doesn't seem to be the case.
I have smcFanControl installed and the MBP seems to be relatively cool to the touch. The fans never seem to be loudly kicking in and I have it raised on a fan powered cooling pad.
I do, though, use pretty much every port on my MBP. External monitor, speakers, both USBs, and firewire 800 are all in use, so maybe this is a resource issue or a very area specific heat issue.
View 2 Replies
View Related
Sep 7, 2009
I just bought myself an entry-level MBP 13". Coming from PB 12" 1.5 ghz, this is a major upgrade for me, and I am happy about it. However, there is one thing that I cannot figure out.
I have been a happy user of Dell 2209WA, which works perfectly with my PB. Today, I connected the monitor to my brand-new MBP via Mini DisplayPort to VGA adaptor. After connecting it, I closed the machine and woke up using my mouse. Immediately after that, the monitor said "Entering Power Saving Mode." I clicked the mouse, then the picture was sort of blurry. Then the monitor kept on entering power saving mode... As for the picture quality, even after I opened system pref. and detected the monitor, it was still not good. I'm totally bummed, because I really like the monitor.
View 9 Replies
View Related
Mar 28, 2012
I want to know what clamshell mode is and how do I set it?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 3, 2012
I'm running my MacBook (not "Pro") in clamshell mode to drive two external monitors. Am I risking anything by having the lid closed?[url] Please bear with me for a second. I'm a long time Mac user—since the Mac Plus came out—and diehard Power Mac and Tiger fanatic, so I'm new to Mac-Intels and Snow Leopard. A full description of my MacBook setup is here:[url] This is my only Intel Mac. I rescued it from the trash, literally, after my wife had discarded because of a bulging battery that was making the keyboard, trackpad and mouse inoperative. I only use it to run Photoshop 13 ("CS6") which doesn't run on my Power Mac G5 Quad.
Info:
PowerMac, Mac OS X (10.4.11), 2.5G5Quad,16GB,7800GTX 512MB, Tiger
View 2 Replies
View Related
Dec 26, 2009
I had a problem with my laptop where the lcd on the monitor does not always work, presumed to be due to a loose inverter cable or something similar to this. As a temporary solution I have been using an external monitor for the past few days. Depending on whether the laptop lcd is working, I have had it on both mirrored and dual monitor settings. However, this evening when I have come to use it, the external monitor is now the only one that is working. Options to turn off mirror display have now gone. Also, the button on my mouse pad no longer works, yet the pad itself does.
I have come to the conclusion that my laptop is in 'clamshell' mode. It remains on, and does not sleep when I close the lid. I have put it to sleep form the apple menu, disconnected the external monitor, and the opened the lid again, and when it turns back on from sleep, the screen flashes on for a second, but then goes to sleep again. I have tried turning it off, restarting, taking the battery out, everything I can think of, but unless the external monitor is connected it almost immediately goes back to sleep.
View 3 Replies
View Related
May 10, 2010
I have connected my mbp to the samsung 23" external monitor(and I am loving it ), and I figured that during the weekdays I am almost using it clamshell mode all the time.
View 2 Replies
View Related
Jun 10, 2008
Experiencing extremely slow internet when using my Macbook (2.2 GHz core 2 duo, 1 GB memory) in clamshell mode after updating to 10.5.3. I use my Macbook with an external monitor (samsung 22" syncmaster), keyboard and mouse (However, when using the external monitor with the MBs top open I have no problem so I dont think its a problem with the monitor as some others have had).
When using my Macbook with its top down the airport display shows only one or two bars, and I need to wait from ten seconds to a time out for web pages to load on both Safari and Firefox. When I use the MB by itself I have no problems. The problem is not with the network as my roommate running a macbook 10.4.11 is fine (as well as a pc) and I have the same problem with slow Internet when connected to other networks.
Another problem I have had is with the sleep mode after updating to 10.5.2. The computer will not go to sleep when I leave the monitor and keyboard plugged in, also it will wake up at odd times (once every hour or so, this perhaps is due to the Bluetooth mouse I have connected).
View 11 Replies
View Related
Sep 16, 2009
Am I able to stream video to my xbox in clamshell mode? I don't have an external display, mouse or keyboard connected. Right now I just turn the screen off, but I'd like to close the lid.
I have a late 2008 2.53 with snow leopard
View 1 Replies
View Related
Oct 23, 2009
How does the Macbook manage airflow when closed? In contrast to the former version, the air vent kind of seems to be blocked when the lid is shut? My current CD 2Ghz Macbook already revs up its fans on light load when I use it in clamshell mode. Will this get even worse?
View 3 Replies
View Related
May 20, 2010
Can I use my 15" i5 2.4GHz MBP in "Clamshell Mode" connected to my 23" Samsung display without a Bluetooth mouse or keyboard connected?I realize I'd have no control over the system without an external mouse of keyboard, but if I am just watching a movie on the larger display, I'd love to just close the shell on the MBP
View 10 Replies
View Related
Oct 27, 2010
iv been up all night trying to figure out a solution this hdtv as external display problem, and i just cant figure it out. I want to, if possible:
1. connect the macbook pro (13" mid 2010) to my plasma tv
2. Close the lid of the macbook pro
View 1 Replies
View Related
Apr 23, 2009
i just bought this kick ass new display, 20 inches 1680x1050 for only $120.00! its a really good deal you guys should check it out... [URL]
anyhooser, i followed the instructions for clamshell mode and i still cant get it to work. i have a wireless logitech mouse and keyboard, and i cant make them wakeup the computer when it's closed. i think i tricked it into working once or twice but i cant get it to work consistently.
View 12 Replies
View Related
Jun 5, 2010
Pretty much what the title states, I have the new alpha numeric wired apple keyboard and I want to use my macbook in clamshell mode without having to open it up to power on, so is there a way to do it?
View 5 Replies
View Related
Jun 29, 2014
My 2.3 GHz i5 13" MacBook Pro Early 2011 goes to sleep whenever I boot it in clamshell mode with an external display, mouse and keyboard attached (it sleeps right after the boot sequence). Is there any way to prevent this, as it is very annoying when restarting.
Running OS X 10.9.3
When booting from an external firewire drive, on which I have OS X 10.9.3 installed, my Mac completes the boot sequence without going to sleep. I have run the OS X installer over my current installation, (without wiping), and the computer still goes to sleep once the boot sequence has completed.
View 5 Replies
View Related
May 18, 2009
I running a 30 Dell monitor with my unibody macbook pro. It runs pretty hot in clamshell mode and I wanted to know what's the best way to deal with this? Buy a laptop cooler? Put it on a stand? Open the lid (but then both displays are running bringing down my external monitor resolution)
View 24 Replies
View Related
Mar 17, 2012
ok i like to use my macbook as a desktop computer and was wonting to know if i use the clame shell mode will it break my screen or macke it over heat i kindea scared to do it can some one help me pleas i have a 2006 white macbook
Info:
magic mouse, Mac OS X (10.5.8)
View 1 Replies
View Related
Feb 27, 2010
I use my MBP w/ a external display, usb keyboard and magic mouse. I keep my MBP in clamshell mode all the time while stationed at my house. When I shut my computer down, everything is peachy, but then when I want to power up my computer, I wish there was a power button on my keyboard so I don't have to open my laptop up and press the power button, then shut it fast. Any way to set a f1 or f2 key to turn on my comp in clamshell mode? or maybe make my magic mouse turn on my computer through some setting
View 4 Replies
View Related
Aug 17, 2009
I have a 2 month old 13" MBP which I absolutely love. The only hitch is that there is an oddity when connected to my Dell 2008wfp display. It only happens when I wake the MBP from sleep. A number of things happen sometimes. Usuaully, when I wake the MBP from sleep, i get a black screen on both displays and all I can see and control is the cursor. Sometimes the main display will be black, but the MBP display will show the desktop wallpaper, but again, I can only see and control the mouse cursor. It should also be worth mentioning that the keyboard is rendered non-functional as well.
Sometimes, OS X will appear on both displays, with mouse cursor active, keyboard inactive, but I am unable to click anything or interact with anything OS X.
Anyway, I'm at the point where I need to mention this because it happens quite frequently and its getting rather annoying. The only way I can get out of this hang, is to cold reboot the machine. It happens everyday and at least 50% of the time I wake the MBP from sleep. When not connected to the display, I never get this occurrence. Also, this display worked perfectly when I used to own the classic 15" MBP, so its hard for me to pinpoint what exactly is the anomaly that is happening.
Anyone else experiencing this same issue? I am using a mini display port to DVI adapter to the Dell display.
View 6 Replies
View Related
May 27, 2012
I have a new MacBook Air with an External monitor. I have no keyboard or mouse or trackpads attached to it. When I close the cover, instead of going to sleep, it goes into clamshell mode. I even opened a support session with Apple, and the technician said I should take it to the Genius Bar. Did that and the Genius found that the same thing happens on every MacBook.Why doesn't it just go to sleep?
Info:
Mac Book Air, Mac OS X (10.6.8), 11.6"
View 3 Replies
View Related
Apr 9, 2010
The text looks a lot different from the Macbook's display. I got it to 1080p and stuff - and yes, it's showing the full 1080p. But how do I get the text to look more like the Mac's text? My Macbook display looks so much sharper. The text on the Dell looks very not anti-aliased...it isn't thick, etc.
View 2 Replies
View Related
