Final Cut Studio :: When Export Sequence Edited With QuickTime / Playback Video Different On Timeline

Nov 30, 2014

Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7 

When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.

The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different. How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly. can I play within the FCP player window and Log and Capture?  

Info:
MacBook Pro, Mac OS X (10.6.8)

View 2 Replies


ADVERTISEMENT

Final Cut Studio :: Why Can't Export Sequence Using Compressor 3.0.5

Aug 23, 2014

why I can't export my FCP 6 sequence using Compressor 3.0.5.   

I have an hour-long 1080p Pro Res 422 sequence that I am trying to export using Compressor 3.  Whether I export using the 'Pro Res 422' preset or the 'H.264' preset, transcoding commences but then stops abruptly 15 to 20 minutes later with an error message saying 'Quicktime Error: -50.'

For what it's worth, I have an early-2008 dual quad-core Mac Pro desktop with 6 GB of RAM and two ATI Radeon 5770 graphics cards.  I am currently running OS X 10.6.8.  The media (including Motion graphics) and project file are on an external drive connected via Firewire 800.

how to properly export this sequence at the highest quality without getting the error message

Info:
Mac Pro, Mac OS X (10.6.8), Final Cut Pro 6

View 8 Replies View Related

Final Cut Pro X :: Sequence Edited In Premiere - Changing Audio Channels

Aug 20, 2014

Someone edited a sequence for me in Premiere.  The audio was recorded 4 channel on a external recorder (four mics were used). At times, he used the wrong channel in the timeline. I believe what he did was take all the channel one audio and put it on the timeline and deleted the other 3 channels. Hence In many cases, using the wrong mic.IS there a way to swap channels in the timeline? I would almost need to do a reconnect, but swap channels at the same time. I use FCP and will convert this to a FCP sequence using 7toX.  

View 2 Replies View Related

Final Cut Studio :: HDV Sequence Settings?

Jun 2, 2014

I've been using FCP 7 for a few years and have just now discovered a problem I can't seem to solve. I have some archive material that I originally injested from HDV tape to HDV 1080 50i 1440 x 1080 and the clip info shows this to be correct. I set up a sequence and and clicked all the settings to match this and no matter what I do, I keep getting either a red render line or a green render line. I'm not entirely sure whether it should be set up for HDTV or just HD in settings, but setting HDTV cause the red render line to appear. Upper field is chosen and 48Khz for sound.

Info:
MacBook Pro, Mac OS X (10.6.8)

View 3 Replies View Related

Final Cut Studio :: Why Length Of Imported Video Shorter Than Original QuickTime Version

Dec 10, 2014

When I open my .mov file in QuickTime, it is 15:33. However, when I import it into FinalCut, it is only 14:09. Is this a frame rate issue?

Info:
Final Cut Pro 7, OS X Yosemite (10.10)

View 1 Replies View Related

Final Cut Studio :: How To Edit A Multiclip Sequence With Three Cameras But All Are Different Frame Sizes

Jun 22, 2014

I need to edit a multiclip squence with three cameras, but all three have different frame sizes. My frame sizes are 680X480, 720X480, and 720X404. What's the best solution?

View 14 Replies View Related

Final Cut Pro :: Application Crashing Without Reason / Unable To Playback Timeline

Jan 29, 2010

I use FCS 2 Final cut pro 6.0.5, hdv 1080i60 shot on canon xl-h1

When trying to playback the timeline, for what ever reason... crash! Doesn't happen all the time, and not for any particular reason. Also, when I tried to export the project, it got to that magic 7% and crashed. Export settings were as follows:

-Quicktime Conversion
-H.264
-FR 30
-Limit:2500 KBs
-Key Frame Every 30
-Custom Res:872x480

This is optimised for Vimeo

Information:
Power Mac G5, Macbook Pro 15" Unibody
Mac OS X (10.6)

View 2 Replies View Related

Final Cut Studio :: How To Get Playback Of MOV Files With Redcode Codec

Aug 24, 2014

I am not able to play the .mov files created by Red camera so..

how one can get the playback of .mov files with Redcode Codec?

Info:
Mac Pro, OS X Mountain Lion (10.8)

View 3 Replies View Related

Final Cut Studio :: 30 Hours Export Using Compressor 3.5

Aug 27, 2014

export from fcp 7 to compressor 3.5 took over 30 hrs. sequence was 95 min. 1920x1080 60i pro res 422. i did use the sharpen filter on the entire sequence. export was using the youtube setting (h.264) w/ same source size. i'm using a 2x2.8 ghz quad core intel xeon mac pro w/10 gb ram 4 x1tb hard drives. source files are on external fw 800 drive and i export internally to my hard drive. 30 hrs is ridiculous. i also tried first exporting sequence as a prores 422 same setting file. that took 20 hrs and then exporting that using the youtube setting which took another 15 hrs for a total of 35 hrs. what can i do to speed this up?

View 1 Replies View Related

Final Cut Studio :: QT Export Footage Has Extreme Artifacts After Upgrade To Mavericks

Sep 3, 2014

I upgraded operating system to Mavericks, since then all footage I export from FCP as a QT movie has artifacts.  I'm using FC 6.0.6. I have the settings optimized for download in the settings options ad data rate at 3000. I have been exporting like this for years with footage looking same as in FCP timeline. Mavericks doesn't work with older programs..I only downloaded the thing so I could run Da Vinci Light, it screwed up my mail system too.

View 1 Replies View Related

Final Cut Pro X :: Syncing Audio To Video Already On Timeline

Sep 11, 2014

How do I sync audio to video I've already put on the timeline and cut in FCP X?

View 4 Replies View Related

Final Cut Studio :: Extract Middle Portion Of Video Frame As Separate / Smaller Video

Aug 21, 2014

Someone at work recorded a screen capture video. Within the frame, there's good material but a lot of garbage around the edges that I don't want (what Sally Hogshead would call "screen crapture"). The good stuff lasts the entire duration of the clip, is not perfectly centered, and does not move at all in its placement or change size throughout the clip. 

If I crop or trim, I can eliminate the garbage, either making it transparent or black (there's no other clip beneath it to show through) easily enough.  Is there a way to then export just the desired portion of the video frame (the non-cropped good stuff) as its own video at a smaller frame size? 

Info:
Final Cut Pro 7, Mac OS X (10.7.5)

View 6 Replies View Related

Final Cut Pro X :: Event And Timeline Clips Have Turned Gray And No Video Imagery Shows

Dec 3, 2014

Recently my event clips and timeline clips have turned grey and no video imagery shows unless I pass the cursor over the individual clip. I was close to finishing this project and it plays in the viewer but making adjustments etc seems impossible. FCP is updated and I have restart the computer several times. I have used FCP for 3 years and have never had this problem.

Info:
Final Cut Pro X, OS X Mountain Lion (10.8.5)

View 12 Replies View Related

Final Cut Express HD :: Why Does Export File Formats That Can't Be Accessed In QuickTime

Jun 2, 2014

I've been slowly but surely figuring out the FCE program.  About 3 months ago I editied a video, exported it and when I clicked on the .MOV file it automatically converted it to a QuickTime compatible file, which I was then able to save and upload to YouTube with no issues.  I have not updated or changed any settings or anything on my computer since then and now when I export a video it shows up as an .MOV file that QuickTime can't access.  Also, when I click on the "more info" button, it sends me to a link with a list of compatible formats and at the very top of the list is .MOV!  I really don't know what to do now. 

I just want to be able to view the video I edited and post it to YouTube.  

Info:
MacBook Pro

View 4 Replies View Related

Quicktime Pro Video Playback Is Washed Out

Apr 21, 2012

This is question is being posted in the Mac OS & System Software because I couldn't find Quicktime under Windows software. Quicktime Player works fine under XP Pro on one PC and my other XP Pro computer has Quicktime Pro. MOV video is washed out running with Quicktime Pro but also Realplayer's playback is washed out. All other image files display fine.

Info:
Quicktime Pro 7.7.1 1680.42, Windows XP Pro

View 3 Replies View Related

MacBook Pro :: QuickTime X Video Pauses During Playback

Aug 29, 2009

I'm trying to figure this out and I've gone through 'Energy Saver' settings and turned off 'Put the hard disk(s) to sleep when possible' but sometimes - not reliably, playback of a video file just pauses and then resumes as normal after about 10 seconds. It happened just the same with QT and Perian under Leopard and now happens in Snow Leopard too. Similarly, this sort of oddness happens with playback on VLC too.

View 7 Replies View Related

Final Cut Studio :: Converting Analog Video From Camcorder And VHS Player

Dec 4, 2014

I'm converting analog video from a camcorder and vhs player through the elgato converter to a macbook pro 2011.  I then have to convert the files to apple pro res LT using mpeg streamclip before they are compatible with FCP7.  What converter box will output the video to a format that is FCP7 friendly? Not sure if the canopus units are what will do the trick. 

Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5)

View 6 Replies View Related

Applications :: Exporting To Quicktime From Keynote - Video Playback Stops?

Nov 26, 2009

I am running a Macbook 2.4GHz with 4GB of RAM and Snow Leopard.

I have an issue using Keynote 09.

I have created a presentation that has a m4v video playing in the background.

The video was the first thing I put in and was just placed on the slide and set to play when the presentatation starts.

The video starts at the beginning automatically and plays for the entirity of the presentation. The presentation is only 2 mins long. Over it are a number of different words all with various animations. There is also a music file playing in the background.

I have then recorded the show with manual timings and now when I play it in Keynote it runs smoothly from start to finish. The video continues to play and the transitions are smooth.

HOWEVER, when I then try and export the presentation as a Quicktime file I encounter a problem. The video starts initially at the beginning of the presentation but the minute any other animation kicks in the video freezes and does not restart. I have tried a large variety of export settings but to no avail. I have also spent time trawling the internet to try and solve this problem but no solution found.

It is very frustrating. I need to export it because I need it as a movile file rather than a keynote presentation.

View 1 Replies View Related

QuickTime :: Video Clips Playback Choppy After Exported From IPhoto?

May 22, 2012

I have created a iPhoto '11 slideshow with photos and some DSLR video clips. The videos play smoothly when slideshow is played on Macbook Air, but when saved or exported as Quicktime 10 movie, the video clips playback choppy. What do I need to do?

Info:
MacBook Air, Mac OS X (10.7.1)

View 1 Replies View Related

Final Cut Pro X :: Export Whole Video After Editing In All Different Shots

Dec 12, 2014

I'm a drummer and use a few different camera's to record my drumming. I have one camera capable of recording 720p or 1080p, but my other 2 only shoot 480p. I want export the whole video after editing in all the different shots, at 1080p or 720p. My problem is, the camera's that shoot 480p, have a border around them, so can I fill in that border somehow?

Info:
MacBook Pro, OS X Yosemite (10.10.1), 2.2ghz i7 quad-core

View 6 Replies View Related

Applications :: Final Cut Pro Keeps Freezing When Export/render A Video?

Mar 28, 2009

I've been working on some making some video clips that are ipod commericals (to eventually do the whole thing on imovie) but after 4-5 videos being finished, I work on the next one and right in the middle of rendering, it just freezes and doesn't do anything else, or when I try to just export it it does that, but before it works fine. I tried removing a couple extra effects I aded, and it still does it.

View 2 Replies View Related

Final Cut Pro X :: Export Large (huge) Video In Separate Chunks?

Dec 2, 2014

I'm fully up-to-date with all the software. 

I am recording a day-and-a-half worth of presentations.  The video will total out to be about 12 hours or more.  I am recording presentations by various professors on different subjects.  12-hour-video is worthless to a normal sane person.  I want to cut the video into sections and then export to Vimeo.  Ultimately I would like to slice-up everything into 15-20 minute sections. 

Is there an easy way, say "chapters", that I can setup in FCPX and then click "Export" and export out 40-or-so videos?  I'd like to call a section "Greg-1" and "Greg-2" and have FCPX generate Greg-1.mp4 and Greg-2.mp4, etc... 

Info:
Final Cut Pro X, OS X Yosemite (10.10.1), MacBook Pro w/ Retina

View 7 Replies View Related

Final Cut Pro X :: Exporting / Converting Edited Projects To MFX Files

Dec 4, 2014

Im an FCPX editor for a local cable fishing show in So Cal (Angler Chronicles) and Im still mailing beta SP tapes to a studio so the show can be aired.

I recently heard that if we covert to MXT files with 8 channel audio and "drop frame"?, in the future we can safely send the files electronically, via the web. 

So, how to get my edited shows into the format mentioned above? 

Info:
Mac Pro, OS X Mavericks (10.9.5), 2X2.93 GHz 6- core 32 GB 1333 MHz

View 14 Replies View Related

OS X :: Can Use Final Cut Pro To Create A Timeline

Apr 9, 2009

I have looked around and can't find any guides for my particular needs, so maybe someone here can advise me. I am a teacher and would like to make little instructional podcasts that include still images of a process and some narration over them. I need to be able to control how long to make the still images last on screen so that they fit the narration.I also want to know the best way to package it/export it so that it can be emailed or played on mobile phones.

View 4 Replies View Related

Final Cut Pro X :: Can Save More Than One Timeline?

Aug 29, 2014

I lost all content from a timeline i had been working on for 3 days, anyway of retrieving it ? and can i have 2 different projects running ?

Info:
Final Cut Pro X, iOS 7.1.2

View 1 Replies View Related

QuickTime :: Open Jpeg Image Sequence

Apr 30, 2012

I'm trying to make a sequnce of stills into a time-lapse video.Someone on the FCP forum told me to use Quicktime to open the sequence and save it as a Pro Res video.But Quicktime won't let me open the jpegs.

Info:
Final Cut Pro X, Mac OS X (10.7), want them to import as single frame

View 3 Replies View Related

QuickTime :: Osx Lion V10.1 - Open A Sequence Of Images?

Jul 2, 2012

I am running XSI lion 10.7.4 and have a default QT installed. I am not able to open a sequence of images and save out to a mov file.There seems to be no menu selection anymore.  

Info:
MacBook Pro, Mac OS X (10.6.7)

View 2 Replies View Related

Final Cut Pro X :: Why Won't Music Play In Timeline

Aug 30, 2014

when i search and find the song i want it plays in the finder but when i drag it onto the flim strip it shows solid green and wont play.. just bout the software and am frustrated it wont work...

Info:
OS X Mavericks (10.9.4)

View 2 Replies View Related

Final Cut Pro X :: How To Synchronize Clips From Timeline

Jun 30, 2014

Is there any way to synchronize clips from the timeline? I understand that there is a way to synchronize from the Project Library but it makes more sense for me to sync from the timeline. If there just isn't a way to sync from timeline, is there a way to put all the clips from the timeline into the Project Library so I can do it there? 

I have been using pluralize but wanted to see if I can skip all those extra steps of exporting and importing.I also wanted to see how effective the sync feature is in FCPX 10.1.2 

View 8 Replies View Related

Final Cut Pro X :: Audio In Timeline Is Distorted

Jul 1, 2014

The audio in the timeline is distorted. The clips play well in the browser and the waveforms look ok in the timeline. When I click on the volume line in the timeline it becomes a double yellow line that I don't recall seeing before. This all happened after an auto update to 10.1.2

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved