Final Cut Studio :: 30 Hours Export Using Compressor 3.5
Aug 27, 2014
export from fcp 7 to compressor 3.5 took over 30 hrs. sequence was 95 min. 1920x1080 60i pro res 422. i did use the sharpen filter on the entire sequence. export was using the youtube setting (h.264) w/ same source size. i'm using a 2x2.8 ghz quad core intel xeon mac pro w/10 gb ram 4 x1tb hard drives. source files are on external fw 800 drive and i export internally to my hard drive. 30 hrs is ridiculous. i also tried first exporting sequence as a prores 422 same setting file. that took 20 hrs and then exporting that using the youtube setting which took another 15 hrs for a total of 35 hrs. what can i do to speed this up?
View 1 Replies
ADVERTISEMENT
Aug 23, 2014
why I can't export my FCP 6 sequence using Compressor 3.0.5.
I have an hour-long 1080p Pro Res 422 sequence that I am trying to export using Compressor 3. Whether I export using the 'Pro Res 422' preset or the 'H.264' preset, transcoding commences but then stops abruptly 15 to 20 minutes later with an error message saying 'Quicktime Error: -50.'
For what it's worth, I have an early-2008 dual quad-core Mac Pro desktop with 6 GB of RAM and two ATI Radeon 5770 graphics cards. I am currently running OS X 10.6.8. The media (including Motion graphics) and project file are on an external drive connected via Firewire 800.
how to properly export this sequence at the highest quality without getting the error message
Info:
Mac Pro, Mac OS X (10.6.8), Final Cut Pro 6
View 8 Replies
View Related
Sep 3, 2014
I upgraded operating system to Mavericks, since then all footage I export from FCP as a QT movie has artifacts. I'm using FC 6.0.6. I have the settings optimized for download in the settings options ad data rate at 3000. I have been exporting like this for years with footage looking same as in FCP timeline. Mavericks doesn't work with older programs..I only downloaded the thing so I could run Da Vinci Light, it screwed up my mail system too.
View 1 Replies
View Related
Nov 30, 2014
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different. How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly. can I play within the FCP player window and Log and Capture?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Jun 1, 2014
I've been using Compressor 4 for some time and have been converting .MOV files into >WMV files. When I selected an output source the Quicktime Export Components always showed up at the bottom of the list. I would select it and then be able to START BATCH. Now, it's no longer there. Instead, the word CUSTOM is there, instead, which I can't click on at all.
I've always had and used Flip4Mac and even upgraded but still the option to select Quicktime Export Components is missing entirely. I've rebooted the program and just can't get it back.
View 6 Replies
View Related
Nov 21, 2008
Apple this week released Pro Applications Update 2008-04, a recommended update for all users of Final Cut Studio, Final Cut Server, and Logic Studio. The release addresses general performance issues, improves overall stability, and includes new versions of Final Cut Pro, Compressor, Color, and Shake. Final Cut Pro 6.0.5 Among the enhancements delivered as part of Final Cut Pro 6.0.5 are: Improved High-Precision Rendering: If you render sequences using the high-precision video processing setting, make sure to update to Final*Cut*Pro*6.0.5 for improved reliability when rendering still images and footage in high-resolution formats. Extended Metadata Support for the Panasonic AG-HMC150 Camcorder: Final*Cut*Pro*6.0.5 captures the additional metadata for footage recorded with the Panasonic*AG-HMC150 professional AVCHD camcorder. Improved Support for the Panasonic HDC-SD9 Camcorder: Final*Cut*Pro*6.0.5 provides enhanced precision and reliability when ingesting files from the Panasonic*HDC-SD9 camcorder. Improved Support for Metadata Imported from P2 Cards: Final*Cut*Pro*6.0.5 provides support for extended metadata that is captured on P2 cards. Compressor*3.0.5 and Apple*Qmaster*3.0.5...............
View 10 Replies
View Related
Jun 5, 2014
I'm transitioning from FCP 7 and a Sony DV camera to FCP X and a Canon HD camera. I shot video of a dance performance in HD 1920 x 1080, 59.94P. I imported the AVCHD clips into FCP X with the copy media option. One clip is 1:26:57 (1 hr, 26 min ...) and the other is 1:21:43 long
When I used FCP 7 I created sub-clips for each dance before laying them down on the timeline. In this FCP X project I created compound clips off of the longer of the two AVCHD clips (the performance up to intermission), created a project named DVD 1 and moved the compound clips to the timeline and added titles.
If I follow my old workflow, the next step would be to send to Compressor and then import into DVD Studio Pro but I want to burn a simple DVD to check out how the titles look but when I try to send the project to Compressor the "Send to Compressor" and "Share" menu items are grayed out. If I select the original 1:26:57 AVCHD the options are also grayed out but if I select the slightly shorter 1:21:43 clip they are not. If I select any of the compound clips the option are also grayed out.
Info:
Mac Pro (Mid 2010), Mac OS X (10.6.8), 3.33 GHz 6-Core Intel Xeon
View 3 Replies
View Related
Aug 20, 2014
Making DVD, chapters from Final Cut Pro X to Compressor 4.1 do not fully transfer for the DVD menu. I can get the title of the chapters by clicking "include subtitles" but the associated picture for the chapter does not show (though it will on iDVD). So I have a boring menu with the words but not the picture. For example, one chapter is of Baltra, Galapagos. The island isn't shown though the chapter says, "Baltra"
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.4)
View 3 Replies
View Related
Jun 30, 2014
When I try to open either of these 3 apps the system tells me they can't open because they are currently being updated. Software Update shows my system as needing no update. The last update that it shows was for ProApps Codecs v1.0.5. I am running a macbook pro / OS 10.9.3.
The manual download for that update, (ProApps Codecs v1.0.5), is a dead link, (URL....). I have one of the new black mac desktops with the exact same setup as my laptop. It's software updates list shows an update for the 3 apps I am having trouble opening on my laptop as having successfully installed. All 3 apps are working fine on the desktop system. How to either:
- trash my preferences on the laptop to force system update to reinstall the ProApps Codecs v1.0.5 update?
- fix the broken link at support.apple.com so I can manually install the ProApps Codecs v1.0.5 update?
- or perform some kind of Voodoo that will get my FCP, Motion, and Compressor opening again?
View 1 Replies
View Related
Jun 30, 2014
When I try to open either of these 3 apps the system tells me they can't open because they are currently being updated. Software Update shows my system as needing no update. The last update that it shows was for ProApps Codecs v1.0.5. I am running a macbook pro / OS 10.9.3.
The manual download for that update, (ProApps Codecs v1.0.5), is a dead link,[URL].
I have one of the new black mac desktops with the exact same setup as my laptop. It's software updates list shows an update for the 3 apps I am having trouble opening on my laptop as having successfully installed. All 3 apps are working fine on the desktop system.
- trash my preferences on the laptop to force system update to reinstall the ProApps Codecs v1.0.5 update?
- fix the broken link at support.apple.com so I can manually install the ProApps Codecs v1.0.5 update?
- or perform some kind of Voodoo that will get my FCP, Motion, and Compressor opening again?
View 1 Replies
View Related
Apr 24, 2009
Will Final Cut Studio 2 run on my 13.3 inch 2.6 ghz Alum Macbook?
View 3 Replies
View Related
Jul 4, 2009
Will Final Cut Studio Run on the New Macbook Pro
Macbook pro 2.53GHz both 13" and 15"Rocks
View 7 Replies
View Related
Jul 8, 2009
Can all of the Macbook pros run final cut studio 2
View 2 Replies
View Related
Nov 14, 2009
I have Final Cut Studio 2.0.1. Retail version. I got it with a 2nd hand MBP I bought recently, and I plan to sell FCS2. I have no need for it, iMovie is fine for me.
But I don't have the big fancy box or manuals included... what is meant to be in the box?
I do have...
- 9 installation CDs in the small black apple box.
- Final Cut Studio Software License agreement.
- 'Installing Your Software' documentation with serial numbers.
- Apple Software 'Proof of Purchase' coupons.
If anyone has FCS2 and can tell me what I'm missing, I can advertise it more effectively and truthfully!
View 1 Replies
View Related
Apr 16, 2010
i have a macbook and was wondering if you could run Final cut studio 3 on it? i heard that i wouldnt be able too run motion, but didnt know for sure. I'm geting ready to upgrade the ram in my macbook too.
View 1 Replies
View Related
Aug 26, 2014
i was shooting an image film with a CANON XF100, and now i have a severe audio problem! All the data (imported via SD-Card to my Mac) was somehow corrupted. It sounded like "Trash", always cut-off or so. I tried to import it to FCP7, yet no success. Is XDCam going to work or any other method to encode MXF to MOV?
how to encode the MXF-files to (uncompressed) MOV or MP4-files. If possible, without a 3rd party-software to purchase. i know some software too, yet Handbrake or VLC seems to fail, too.
So, simply a way to either convert the MXF-data directly into a FCP7-proejct or maybe FCPX, OR simply to convert it to a MOV or MP4, whatever FinalCut can use and import...
View 2 Replies
View Related
Jun 2, 2014
Is there a way to run Final Cut Pro Studio 5.1 HD on Mavericks? An emulator? A patch? Anything? I can't afford to buy a THIRD copy Final Cut Pro! (I now have FCP 2 and FCPS 5.1.)
Info:
MacBook Pro, OS X Mavericks (10.9.3), Legacy software
View 12 Replies
View Related
Mar 14, 2008
Has anyone heard any rumors of a new Final Cut Studio coming out? It feels like there should be a new one coming out soon... I'm afraid that if I buy it now they'll announce some release or something like that this June.
I have Studio 1, and would like to "upgrade" (I can't legally because I have the student version), but it's no big deal for me to wait.
View 3 Replies
View Related
Aug 11, 2008
I bought a copy of this on eBay and most of the CD's are not the latest versions. For example, I have Final Cut 5.1, SoundTrack 1.1, etc. The box shows the latest versions on the cover but the CD's say otherwise.
The seller said those are the version Apple shipped him in Sept 07. Is it possible that Apple included older versions of the software for the academic version or is he ripping me off?
View 1 Replies
View Related
Aug 25, 2010
I'm close to approaching graduate school, majoring in film directing, and was told that the school i want to go to use Final Cut Pro as their default video editing program. It'd be nice to use their computers but i would like the entire suite on my mac but not sure if my macbook would run it well. What's the best specs to make FCS run very well on a mac? I was planning on getting either the low end iMac 21inch or the lower end macbook 15.
View 3 Replies
View Related
Jan 26, 2009
I just installed the motion 3 dvd from the final cut studio 2 but i can't locate it anywhere in the applications or elsewhere. can't find in with search. when i go through final cut pro it also isn't available in send to menu, while color is.
I'm not sure if i'm missing something here. the installation went fine with a reboot. I tried re installing which also seemed like it happened without any problems but no traces of motion.
i have no clue where it is, unless it changed it's name and is hiding somwhere.
View 2 Replies
View Related
Mar 15, 2009
I need to reinstall FCP Studio 2 to repair a messed up Compressor app. How go I go about uninstalling such a large program? There are preference panes and plists and various programs. Should I use an app like app delete or is there another way?
View 1 Replies
View Related
Jul 16, 2009
Last Saturday, I purchased the 15" 2.53 GHz Macbook Pro (the new one that has the battery built into it). Everyone in the store told me it would run FCS2 fine, but after I checked online, it seems that may or may not be the whole truth. Here are the specs:
2.53GHz Intel Core 2 Duo
4GB 1066MHz DDR3 SDRAM - 2x2GB
250GB Serial ATA Drive @ 5400 rpm
SuperDrive 8x (DVD-R DL/DVD-RW/CD-RW)
SD card slot
Built-in 7-hour battery2
NVIDIA GeForce 9400M graphics
I need something portable so I can take the projects I'll be working on along with me and due to financial reasons, I neither want the 17" or the 15" (2.8 GHz) MBP. I have a 1TB Firewire 800 WD external HDD, so I'm not worried about space. What I am worried about is rendering speed and such. So, my questions are:
1. Is this MBP sufficient enough to run FCS2?
2. Should I keep this same MBP but upgrade to the 7200rpm drive?
3. Should I pony up another $300+ and get the 2.66GHz MBP with the 7200rpm drive?
4. Taking into account what I've said, what is my best configuration to run the FCS2 suite?
View 13 Replies
View Related
Jun 17, 2014
My old Mac drive died and bought a Air. Trying to install Final Cut but bumping into error on trying to install Studio. I have an upgrade to Pro but I have been told that I need to install Studio first. I have all the original disks.
Info:
MacBook Air, OS X Mavericks (10.9)
View 2 Replies
View Related
Jun 26, 2014
I'm still using final cut pro 7, last week while I was working on a project the screen turned blue w/white lines, ever since I could not use FCP 7 anymore.. I updated the OS, I even formatted the internal HD, but no success
View 5 Replies
View Related
Sep 9, 2014
Yesterday I tried to begin a capture of material for a new project. After repeated attempts to reboot, examined all connections, I decided the RS-232 cable must have gone bad. Drove 140 RT to replace it. This morning I did and found no difference.
My next step was to upgrade the firmware on the Kona 3 board and did so. Ran Aja VTR Xchange - beautiful picture and synched time code but the one box says " NO VTR connected".....
Decided to try running FCP and open the Log and Capture window to see what it said. Same thing. Nice picture SMPTE time code appears to be fine- "No Communication". So ...
Now I am down to the deck controls and some hidden internal settings having changed somehow, or continued software incompatibility.
I have had splendid synchronization between all of these devices.
FCP- 7.0.3
Kona 3-
Sony JH-3
It seems that one minute FCP setting is off now. I've gone through the Audio/ Video settings and will return to all the preferences settings.
Info:
Mac Pro, Mac OS X (10.7.5)
View 8 Replies
View Related
Jun 2, 2014
I've been using FCP 7 for a few years and have just now discovered a problem I can't seem to solve. I have some archive material that I originally injested from HDV tape to HDV 1080 50i 1440 x 1080 and the clip info shows this to be correct. I set up a sequence and and clicked all the settings to match this and no matter what I do, I keep getting either a red render line or a green render line. I'm not entirely sure whether it should be set up for HDTV or just HD in settings, but setting HDTV cause the red render line to appear. Upper field is chosen and 48Khz for sound.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Jun 17, 2014
I have been using FCP 7 for some time now and all of a sudden I cannot import an Mp4 file. I get a file error saying the FCP does not recognize the file? I have been importing and using Mp4 files all along. I can't find any setting in FCP that would address this problem?
View 1 Replies
View Related
Jun 4, 2014
ios 7.1.1 did not installed in my iphone
View 1 Replies
View Related
Aug 26, 2010
how do i uninstall Final Cut Studio apps?
i just installed them, but they're filling up my app folder. i want to reinstall into it's own folder.
same thing happened with photoshop, but i think there was an uninstall.
do i have to do it all manually and are there instructions so i don't miss anything?
View 4 Replies
View Related
