I am not able to play the .mov files created by Red camera so..
how one can get the playback of .mov files with Redcode Codec?
Info:
Mac Pro, OS X Mountain Lion (10.8)
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different. How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly. can I play within the FCP player window and Log and Capture?
Info:
MacBook Pro, Mac OS X (10.6.8)
I recently shot some footage on a Canon C300 and would like to edit it on FCP 7, problem is it seems since my computer did the upgrade to mavericks I can no longer find the appropriate driver on the Canon site as Mavericks is not supported by Canon for this particular update.
After researching I found that mxf files can be transcoded in log and capture but you need the appropriate driver installed. I have looked into third party applications but none of them seem entirely trust worthy and some cost money, which I don't believe I should pay considering I bought a legit copy of FCP at great expense and Apple seems to have forgotten all about it now FCX has been out for a while.
Info:
Final Cut Studio (2009), OS X Mavericks (10.9.2)
I wrongly assumed that when you go to system settings to select the scratch disks (root folder where all the audio and video render folders and files go, capture files, etc.) that Final Cut would save the folder locations within the FC project you are working in. Makes total sense, but for reasons I don't understand, FC does NOT save these folder locations and the result is that I have render files scattered all over the place on my hard drive and it is quite a mess! Fortunately, the project file remembers where it put the render files, so as long as you don't remove or rename any project folders, everything shows up rendered on the time line as it should. The problem is, if I'm working on several projects at once, I have to reset the scratch disks every time I reopen a project, otherwise the program will save it to the last scratch location selected and put all of the render files in another project's folder. I often forget to reset the scratch disks when I'm busy and now I have render files mixed up in various project folders.
Why can't you just set the scratch disks one time when you first set up the project and have the project always remember that location, instead of always having to reset them every time you reopen a project. I love Final Cut, but this is a product defect that should be addressed and corrected. If the project file can remember where it is putting all the render files, it should also be capable of remembering the scratch disk locations you originally selected when you first set up the project or better yet, save it to the project's root folder by default.
Info:
Mac Pro, Mac OS X (10.6.5)
My normal workflow is to shoot HDV 1080i60 and import via a Sony HD-700 clamshell via firewire into FCP 6.0.6 working with a sequence set to HDV 1080i60. Depending on my next steps, I'll either export straight from here, do a QT conversion, or transfer the sequence to a Pro Res sequence and export from there. I'll often send a compressed (H.264) file to the client via yousendit. Never has there been a problem with the workflow or the client opening the file on a PC...
Now the other day, for the first time I had to work off of my portable set-up....FCE off a macbook pro and an external 7200 rpm hard drive. I imported with the only available choice (apple intermediate codec) and went about my edit. I exported and sent the file....While the file was fine on my laptop the PC user could only HEAR the QT file but got no picture. I was able to burn a DVD and move the operation to my desktop.
But after countless attempts at troubleshooting, including printing to tape and reimporting, recapturing all the original footage from tape, using my standard sequence settings, etc. I still can only export a QT file that is unable to be properly viewed by PC users.
Information:
Mac Pro (2006), FCP 6.0.6, iWeb 09
Mac OS X (10.5.8)
export codec that can give me .mov files that can be used in any quicktime player (mac or pc). Currently exporting to h.264, but it is taking ages...
Second question:
Having troubles too, getting the camera to record in native FCP .mov's. Despite setting to .mov mode in the camera's file format option, it still seems to pump out xdcam ex files...What I want is to record straight sony xdcam files, is there some setting in the camera I am missing?
Information:
G5 DP 2.7
Mac OS X (10.4.5)
LaCie 120G, 40G iPod,
When I try to open either of these 3 apps the system tells me they can't open because they are currently being updated. Software Update shows my system as needing no update. The last update that it shows was for ProApps Codecs v1.0.5. I am running a macbook pro / OS 10.9.3.
The manual download for that update, (ProApps Codecs v1.0.5), is a dead link,[URL].
I have one of the new black mac desktops with the exact same setup as my laptop. It's software updates list shows an update for the 3 apps I am having trouble opening on my laptop as having successfully installed. All 3 apps are working fine on the desktop system.
- trash my preferences on the laptop to force system update to reinstall the ProApps Codecs v1.0.5 update?
- fix the broken link at support.apple.com so I can manually install the ProApps Codecs v1.0.5 update?
- or perform some kind of Voodoo that will get my FCP, Motion, and Compressor opening again?
Will Final Cut Studio 2 run on my 13.3 inch 2.6 ghz Alum Macbook?
View 3 Replies View RelatedWill Final Cut Studio Run on the New Macbook Pro
Macbook pro 2.53GHz both 13" and 15"Rocks
Can all of the Macbook pros run final cut studio 2
View 2 Replies View RelatedI have Final Cut Studio 2.0.1. Retail version. I got it with a 2nd hand MBP I bought recently, and I plan to sell FCS2. I have no need for it, iMovie is fine for me.
But I don't have the big fancy box or manuals included... what is meant to be in the box?
I do have...
- 9 installation CDs in the small black apple box.
- Final Cut Studio Software License agreement.
- 'Installing Your Software' documentation with serial numbers.
- Apple Software 'Proof of Purchase' coupons.
If anyone has FCS2 and can tell me what I'm missing, I can advertise it more effectively and truthfully!
i have a macbook and was wondering if you could run Final cut studio 3 on it? i heard that i wouldnt be able too run motion, but didnt know for sure. I'm geting ready to upgrade the ram in my macbook too.
View 1 Replies View Relatedi was shooting an image film with a CANON XF100, and now i have a severe audio problem! All the data (imported via SD-Card to my Mac) was somehow corrupted. It sounded like "Trash", always cut-off or so. I tried to import it to FCP7, yet no success. Is XDCam going to work or any other method to encode MXF to MOV?
how to encode the MXF-files to (uncompressed) MOV or MP4-files. If possible, without a 3rd party-software to purchase. i know some software too, yet Handbrake or VLC seems to fail, too.
So, simply a way to either convert the MXF-data directly into a FCP7-proejct or maybe FCPX, OR simply to convert it to a MOV or MP4, whatever FinalCut can use and import...
Is there a way to run Final Cut Pro Studio 5.1 HD on Mavericks? An emulator? A patch? Anything? I can't afford to buy a THIRD copy Final Cut Pro! (I now have FCP 2 and FCPS 5.1.)
Info:
MacBook Pro, OS X Mavericks (10.9.3), Legacy software
Has anyone heard any rumors of a new Final Cut Studio coming out? It feels like there should be a new one coming out soon... I'm afraid that if I buy it now they'll announce some release or something like that this June.
I have Studio 1, and would like to "upgrade" (I can't legally because I have the student version), but it's no big deal for me to wait.
I bought a copy of this on eBay and most of the CD's are not the latest versions. For example, I have Final Cut 5.1, SoundTrack 1.1, etc. The box shows the latest versions on the cover but the CD's say otherwise.
The seller said those are the version Apple shipped him in Sept 07. Is it possible that Apple included older versions of the software for the academic version or is he ripping me off?
I'm close to approaching graduate school, majoring in film directing, and was told that the school i want to go to use Final Cut Pro as their default video editing program. It'd be nice to use their computers but i would like the entire suite on my mac but not sure if my macbook would run it well. What's the best specs to make FCS run very well on a mac? I was planning on getting either the low end iMac 21inch or the lower end macbook 15.
View 3 Replies View RelatedI just installed the motion 3 dvd from the final cut studio 2 but i can't locate it anywhere in the applications or elsewhere. can't find in with search. when i go through final cut pro it also isn't available in send to menu, while color is.
I'm not sure if i'm missing something here. the installation went fine with a reboot. I tried re installing which also seemed like it happened without any problems but no traces of motion.
i have no clue where it is, unless it changed it's name and is hiding somwhere.
I need to reinstall FCP Studio 2 to repair a messed up Compressor app. How go I go about uninstalling such a large program? There are preference panes and plists and various programs. Should I use an app like app delete or is there another way?
View 1 Replies View RelatedLast Saturday, I purchased the 15" 2.53 GHz Macbook Pro (the new one that has the battery built into it). Everyone in the store told me it would run FCS2 fine, but after I checked online, it seems that may or may not be the whole truth. Here are the specs:
2.53GHz Intel Core 2 Duo
4GB 1066MHz DDR3 SDRAM - 2x2GB
250GB Serial ATA Drive @ 5400 rpm
SuperDrive 8x (DVD-R DL/DVD-RW/CD-RW)
SD card slot
Built-in 7-hour battery2
NVIDIA GeForce 9400M graphics
I need something portable so I can take the projects I'll be working on along with me and due to financial reasons, I neither want the 17" or the 15" (2.8 GHz) MBP. I have a 1TB Firewire 800 WD external HDD, so I'm not worried about space. What I am worried about is rendering speed and such. So, my questions are:
1. Is this MBP sufficient enough to run FCS2?
2. Should I keep this same MBP but upgrade to the 7200rpm drive?
3. Should I pony up another $300+ and get the 2.66GHz MBP with the 7200rpm drive?
4. Taking into account what I've said, what is my best configuration to run the FCS2 suite?
My old Mac drive died and bought a Air. Trying to install Final Cut but bumping into error on trying to install Studio. I have an upgrade to Pro but I have been told that I need to install Studio first. I have all the original disks.
Info:
MacBook Air, OS X Mavericks (10.9)
I'm still using final cut pro 7, last week while I was working on a project the screen turned blue w/white lines, ever since I could not use FCP 7 anymore.. I updated the OS, I even formatted the internal HD, but no success
View 5 Replies View RelatedYesterday I tried to begin a capture of material for a new project. After repeated attempts to reboot, examined all connections, I decided the RS-232 cable must have gone bad. Drove 140 RT to replace it. This morning I did and found no difference.
My next step was to upgrade the firmware on the Kona 3 board and did so. Ran Aja VTR Xchange - beautiful picture and synched time code but the one box says " NO VTR connected".....
Decided to try running FCP and open the Log and Capture window to see what it said. Same thing. Nice picture SMPTE time code appears to be fine- "No Communication". So ...
Now I am down to the deck controls and some hidden internal settings having changed somehow, or continued software incompatibility.
I have had splendid synchronization between all of these devices.
FCP- 7.0.3
Kona 3-
Sony JH-3
It seems that one minute FCP setting is off now. I've gone through the Audio/ Video settings and will return to all the preferences settings.
Info:
Mac Pro, Mac OS X (10.7.5)
I've been using FCP 7 for a few years and have just now discovered a problem I can't seem to solve. I have some archive material that I originally injested from HDV tape to HDV 1080 50i 1440 x 1080 and the clip info shows this to be correct. I set up a sequence and and clicked all the settings to match this and no matter what I do, I keep getting either a red render line or a green render line. I'm not entirely sure whether it should be set up for HDTV or just HD in settings, but setting HDTV cause the red render line to appear. Upper field is chosen and 48Khz for sound.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have been using FCP 7 for some time now and all of a sudden I cannot import an Mp4 file. I get a file error saying the FCP does not recognize the file? I have been importing and using Mp4 files all along. I can't find any setting in FCP that would address this problem?
View 1 Replies View Relatedios 7.1.1 did not installed in my iphone
View 1 Replies View RelatedI burned a BD-R disc with Final Cut Pro X from the "share" command. Everything looks like it worked. The burner/player is a Samsung SE-506AB/TSBD (a portable burner with a USB plug.) I'm receiving an "unable to open file" from the Quicktime player app. The directory in Finder shows the BD file as AVCHD content. Do I need a separate app? If so, which is it?
View 1 Replies View Relatedhow do i uninstall Final Cut Studio apps?
i just installed them, but they're filling up my app folder. i want to reinstall into it's own folder.
same thing happened with photoshop, but i think there was an uninstall.
do i have to do it all manually and are there instructions so i don't miss anything?
In DVD Studio Pro, how do I have the "FBI Duplication Warning" play only upon disc insertion, but then to not play when I have viewers go to the "Main Menu" wherever they are on the disc? Each time "Menu" button is selected, it first plays the FBI Warning. I realize its because I have that "FBI Warning" as first play, but since I went into the inspector I selected "Main Menu" for the Remote Control Buttons. I thought that would take care of it.
Information:
MacPro3,1
Mac OS X (10.5.8)
Final Cut Pro
Is NVIDIA GeForce 9400M 256 MB of integrated video RAM sufficient to do video editing using Final Cut Studio as well a Motion 3 without getting hang ? The system requirement in Final Cut says it won't work on Intel Integrated graphics card. But this integrated card in the Mac Mine is not Intel, it is NVidia integrated card, so will it work ? I hope to use this new Mac Mini to learn Final Cut, Motion 3 and iMovie, so the last thing I want is for it to hang on me !
View 9 Replies View Related