Motion project doesn't play smoothly
I animated a still image in Motion 4 but when it plays in FCP 7 it doesn't play smooth. I simply adds an image and then added a camera. I then added a move behavior and repositioned the image as well as have it zoom out. The problem is it looks very Jittery/choppy does anyone know why this would be happening and if so any ways to fix it?
Information:
MacBook Pro
Mac OS X (10.6.4)
i DVD project dose not play smoothly when I put the DVD into PC's at work. It has alway worked before but now it seems the spin rate isn't keeping up. I saved it in Best mode and Professional mode and both are stop and go and jerky. It is also formated for Mac and PC
Information:
Mac Pro
Mac OS X (10.6.2)
I own an iMac G5 (not the iSight Version), and I have everything up-to-date (10.5.8). Whenever I try to play a video(be on YouTube, or even on the Mac itself) it doesn't play smoothly, like it plays a few seconds, stops, then plays again.
Info:iMac G5, Mac OS X (10.5.8), Video Playback not smooth
I've been working on avery complicated project all day with multiple layered clips with key frame animations, colour effects etc. All was fine until I opened a new project in the same event which I was going to use to create some effects sequences for the main project. When I went back to the original project it was empty. Tried the Undo function in case I had done anything stupid but it was greyed out. Went to the FCPX backups and the last file was almost 2 hours old but did not have any sign of this project. The only thing I have left is all the imported media.Â
Using FCPX 10.1.3. This is really annoying as all I have left is an h264 file of the almost complete project and it will be almost impossible to start from scratch.Â
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9), Mid 2012 i7
can i run on it?
here is the specification.
2.66GHz Intel Core 2 Duo processor
320GB 5400-rpm hard drive
NVIDIA GeForce 320M graphics processor
4GB memory
I use a Mac Mini G4 1.25GHz with 1Gb RAM, and whenever I try and play HD videos streamed over the internet they never play smoothly, but very choppily. E.g HD Youtube video. why wont they play smoothly?
View 2 Replies View RelatedHow do I play a movie on iTunes smoothly?
View 2 Replies View RelatedI use a Mac Mini G4 1.25GHz with 1Gb RAM, and whenever I try and play HD videos streamed over the internet they never play smoothly.
View 2 Replies View RelatedI've just bought a brand new MacBook Pro 15 inch retina, upgraded to 2.7ghz processor.Â
Video content on YouTube and Vimeo is juddering and skipping worse than it does on my 2009 MacBook Pro. It's not smooth at all. Â
I've had the computer a couple of weeks and haven't had a chance to install anything on it yet (aside from flash player to play the videos), so it's basically as it came from the factory.Â
When I expand a window that is minimized, it doesn't come up smoothly---it's as if it is fighting its way to expand. Need new video card? April 2009 2 X Quad core Macpro. 12 Gig RAM. Video Card =ATI Radeon HD 4870 512 MB  Â
Info:
Mac Pro
Dual Processor Power Mac G5 2 GHz with 4 GB of RAM
I could have sworn that my G5 used to be able to play all levels of HD movies smoothly as anything sometime during normal Tiger usage.
Then one day, I noticed my G5 when on Tiger would stutter playing anything about 480.
I thought the upgrade to Leopard would fix this. But just today I upgraded to 10.5.3 on this G5 (I used the upgrade option on the install DVD to upgrade from Tiger) and it STILL won't play HD trailers 720 or 1080 smoothly.
is this supposed to be? Do I not have the minimum requirements to watch those kinds of resolutions anymore?
I know this machine is 4 years old now, but seriously? That seems crazy to me.
Does anyone else have this configuration and see similar or different behavior?
Information:
G5 Dual 2 Ghz
Mac OS X (10.5.3)
4 GB RAM
I am using a 3D scene using two lights.
The backgrounds is a soft green/yellow tone.
What ever I do with the lights, they create banding in the animation and the result is that it lookes like bad compression.
Information:
G5
Mac OS X (10.5.5)
2x3GHz Quad-Core Intel 10GB memory
I just installed the motion 3 dvd from the final cut studio 2 but i can't locate it anywhere in the applications or elsewhere. can't find in with search. when i go through final cut pro it also isn't available in send to menu, while color is.
I'm not sure if i'm missing something here. the installation went fine with a reboot. I tried re installing which also seemed like it happened without any problems but no traces of motion.
i have no clue where it is, unless it changed it's name and is hiding somwhere.
I generated a generators template in motion with some graphics and imported sound effect from FCP.Â
When I use the template I see the graphics but there is no sound. Â
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.2)
Is NVIDIA GeForce 9400M 256 MB of integrated video RAM sufficient to do video editing using Final Cut Studio as well a Motion 3 without getting hang ? The system requirement in Final Cut says it won't work on Intel Integrated graphics card. But this integrated card in the Mac Mine is not Intel, it is NVidia integrated card, so will it work ? I hope to use this new Mac Mini to learn Final Cut, Motion 3 and iMovie, so the last thing I want is for it to hang on me !
View 9 Replies View RelatedI have two things going within one edited shot.Â
1) I zoom into a still photo via Motion.
2) I use the widescreen Matte video filter.Â
The problem is that it seems like Motion overrides the matte video filter, so that when I zoom into the photo, the photo expands but so does the Matte filter, which I don't want.I want the matte filter to stay put over the moving imageÂ
Info:
Mac Pro, OS X Mountain Lion (10.8.5), FCP(6)
I would like to capture my iPhone screen in action for purposes of demonstrating its usage to others (e.g. How do I create and send a text?). I want to be able to use this in a FinalCut video.
View 5 Replies View RelatedIs there a simple way to add a logo to scrolling credits in Motion 5, like there is in Premiere Pro CC. Like cut and paste the logo to the end of the scroll? Or do I have to set up a separate motion path to match the scroll rate?
Info:
iMac (27-inch Mid 2011), iOS 6.1.2
I have created a FCPX project with a frame rate that does not work well with the frame rate in the events I have taken clips from. I see that I cannot change the frame rate in this project. Can I copy the events on the timeline in this project to a new one with the correct frame rate?
Info:
Mac mini, OS X Mavericks (10.9)
When I try to open either of these 3 apps the system tells me they can't open because they are currently being updated. Software Update shows my system as needing no update. The last update that it shows was for ProApps Codecs v1.0.5. I am running a macbook pro / OS 10.9.3.Â
The manual download for that update, (ProApps Codecs v1.0.5), is a dead link, (URL....). I have one of the new black mac desktops with the exact same setup as my laptop. It's software updates list shows an update for the 3 apps I am having trouble opening on my laptop as having successfully installed. All 3 apps are working fine on the desktop system. How to either:Â
- trash my preferences on the laptop to force system update to reinstall the ProApps Codecs v1.0.5 update?
- fix the broken link at support.apple.com so I can manually install the ProApps Codecs v1.0.5 update?
- or perform some kind of Voodoo that will get my FCP, Motion, and Compressor opening again?Â
When I try to open either of these 3 apps the system tells me they can't open because they are currently being updated. Software Update shows my system as needing no update. The last update that it shows was for ProApps Codecs v1.0.5. I am running a macbook pro / OS 10.9.3.Â
The manual download for that update, (ProApps Codecs v1.0.5), is a dead link,[URL].Â
I have one of the new black mac desktops with the exact same setup as my laptop. It's software updates list shows an update for the 3 apps I am having trouble opening on my laptop as having successfully installed. All 3 apps are working fine on the desktop system.Â
- trash my preferences on the laptop to force system update to reinstall the ProApps Codecs v1.0.5 update?
- fix the broken link at support.apple.com so I can manually install the ProApps Codecs v1.0.5 update?
- or perform some kind of Voodoo that will get my FCP, Motion, and Compressor opening again?Â
I have just made a teaser trailer in Final Cut Pro X. I have everything on my timeline completed but am a little unsure as to what to do next. i want to save it so i can use it on youtube and website.
Info:iMac, Mac OS X (10.7.2)
I was editing a music video last night and finished the edit. I then began to do my color grading. I use Magic Bullet Looks and was using Neat Video Noise Reducer as well. Nothing out of the norm as far as my workflow goes. I got about half way finished with color and turned my computer off when i went to bed. This morning when i reopened fcpx the project loaded but showed a few spots of the timeline that needed to render (the orange bars). BUt once i clicked inside my timeline fcpx froze and i would have to force quit the program.. I have tried uplugging the drive that the events and projects are saved on and opening fcpx that way..it works and other projects from other drives are working fine but when i plug the drive with the corrupted project it loads the project in the timeline but still freezes every single time i click in the timeline and the render percentage is stuck at 0%....Every once in a while when i try it will render about 9 to 30 % then freeze again..
-USING FCPX 10.1
-2011 iMac
-2.5 GHz Intel Core i5
-4 GB 1333 Mhz DDR3
-OSX 10.9.2
When i press "send a project to Final cut" in iMovie nothing happens.
The process bar is completed but Final cut doesn't start. I have the 30 days test version of final cut - does that matter?Â
I have a new Mac Pro running Maverick bought when my IMac running Leopard died on me. The reason I never upgraded the old IMac was because of FCP 6 which I did not want to lose. I backed up regularly onto Time Machine and kept my FCP project files on an external hard driveÂ
I was part way through editing a project when my IMac died. I bought 7toX thinking I would be able to import it but now find that I can't because you have to have FCP 6 or 7 already installed to do so, which you can't with OS 10.9.4.Â
Info:
iPhone 4S
I have a client that wants a project in several forms, including Flash (FLV). How can I best convert a project in ProRes or h.264 to FLV?Â
View 5 Replies View RelatedFCPX 10.1.2 gets stuck while loading a project: the status bar on top of the window saying "Loading xxx project" shows the task is completed with a full blue bar but nothing happens and the panel doesn't go away. Only a few commands are available (not greyed out) in the menus; the Quit Final Cut Pro is available but I get a beep and nothing happens when I select this command. Only way to exit is to Force quit (opt-cmd-esc).Â
The strange thing is that I did not try to open that xxx project in the timeline. I was just trying to copy a range from a compound clip in the timeline into another compound clip already open in (another level of) timeline: just after selecting the range (R) FCP X decided to load project xxx and it got stuck.
Another weird thing is that while the Loading panel was visible and I had no control on FCPX, FCPX started to render the compound clip in the timeline. So I waited hoping that at its end (not the usual behavior... but ok) I could continue working. No way: rendering finishes, but the Loading panel is still there.Â
Info:
iMac, OS X Mavericks (10.9.4), FCP X - Canon HF M56 PAL
I'm using Final Cut Pro X 10.1.3 and I can't find how to transfer my project. I want to do this because my laptop is slower than my Desktop iMac and I want to continue editing it on there. "Duplicate Project" no longer works the way it used to, and "Move Project" only moves it between libraries on the computer.
Info:
MacBook Pro, OS X Yosemite (10.10.1)
I have MAC Book Pro 2.8 GhZ intel core i7 with 16 GB Ram OS X 10.9.3 . Working on my Final Cut Pro X 10.1.1 but I can't seem to make a Duplicate on external HD to be shared on my iMac late 2013 model...
It only copies it on the same HD.... I would like to work my project on both MAC if I could.. I have WD Passport 2 TB on USB 3
How do i share just part of my project? I selected the clips I want to share but when I go to share it wants to share the whole project. I just want to share half of it?
View 2 Replies View Related
