Desktops :: Resolution Setting For 16x9 G4 To Tv Connection?
Jan 20, 2010
Now that I have my G4 connected to my Vizio 20" LCD tv via VGA cable, can anyone tell me how I can properly set the resolution for a 16x9 screen. Currently, the screen has the appearance of a 4x3 aspect ratio stretched to fill screen.
I've tried each of the resolution settings in the G4 with no luck. The tv does not have an option to correct.
Also, would I see better results -- or have more options -- if I purchased a vga - hdmi converter box?
View 1 Replies
ADVERTISEMENT
Aug 26, 2009
My much loved G4, dual 1GHZ processor, mirrored door model, finally died. I bought a second hand G4 with the model spec just below this one - the 867 MHz processor - as I wanted to go on using my cinema display monitor with ADC connector. Newer MACs won't run this monitor without a special adaptor box (which costs more than buying a second hand G4!) The G4 I bought doesn't have a DVD-RW drive, just a CD drive. I had a DVD-RW drive on my own old machine. I was wondering - is it easy to take this drive out of my machine and put it in the one I bought? Or does the lower spec make this a problem?
The guy I bought the G4 from had looked after it well, added a second large hard drive, and updated to Leopard. I had still been using Panther on my own G4, as I still needed to use Classic for some software and games. So, second query is - can I easily reinstall the OS on the MAC I bought to go back to using Panther? Or is there a way to run both operating systems, leaving Leopard as it is - very useful to have for some new applications - and installing the Panther OS on the other hard disc? Ideally, I would like to have both available, but if not possible, then Panther use would take priority. I have the Panther install discs, but the G4 I bought did not come with Leopard install discs.
View 1 Replies
View Related
Jun 27, 2008
I accidentally changed my screen resolution and can't seem to find the stock setting. Does anyone know which one it is?
View 1 Replies
View Related
Apr 29, 2009
I have a Mac Mini (latest version) hooked up to my Panasonic TH-42PV70 by a MiniDisplayPort to HDMI adapter (through my Denon AVR-3808 surround receiver). Does anyone here know the optimal settings in SwitchResX or DisplayConfigX for this screen? I currently use 1280x720 without overscan, which renders a black frame around the image. Is it possible to get an image that fills the entire screen, without losing any information?
View 4 Replies
View Related
Oct 21, 2009
I have an aluminum Macbook Unibody 13" that I just picked up off craigslist and was wondering if anyone new what I can expand the memory to. It has 2 GB Ram in it right now, and it is the 2.4 GHZ Intel Core 2 Duo processor and 250 GB Hard Drive. Also I am trying to download apple wallpapers for it, but when I set it as my wallpaper it doesn't look as clear on my background as it does in the preview, even when I copy and set the one with higher resolution. I must be doing something wrong, if you don't mind could someone take me through the steps of how to properly download and apply wallpapers, as your background?
View 1 Replies
View Related
Mar 29, 2012
I'm using a MBA connected to a 52" TV with a 1920X1080 resolution when I teach. I often turn mirroring on and off depending on what I'm teaching and what program I'm using. When I turn mirroring on it defaults to a 1400X1050 resolution and I have to manually go into display settings and change it to the higher resolution. Is there a way to set the default settings so that it will always default to 1920X1080?
Info:
MacBook Air, Mac OS X (10.7.2)
View 1 Replies
View Related
Apr 9, 2012
I can't be the only person experiencing this, but I can't find anything on the 'net about it. I've got a 15" MacBook Pro (early 2011) and Snow Leopard 10.6.8. About 1/3rd of the time when I logoff and go back to the Snow Leopard login window, the purple Aurora background is smaller than the screen's displayable area, and pushed up into the top left corner of the screen. A wide band of solid blue takes up the right side of the screen and a narrrower one appears along the bottom of the screen.
The login window still works, and if I log into a user, the user's desktop is also limited to that upper left part of the screen -- a roughly 9" x 7" area, instead of the 13" x 8" displayable area of the whole screen. The mouse pointer won't leave the (now limited) desktop area.
I've just figured out that the display resolution shown in System Preferences-->Displays has been changed from the normal/default setting of 1440 x 900 to a setting of 1024 x 768! It happens when logging out of any of (at least) four different users,including two that are rarely used. Restarting the system sets everything back to normal again, as does using System Preferences to set the display resolution back to 1440 x 900. what could be causing the screen display resolution to change after logout?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
Apr 16, 2012
I have just connected an external 19" monitor to my 15" macbook pro. I am using both displays and that is fine, however I would like to be able to change the font sizes in my 19" monitor, because the default one is too small. I have to get awfully close to the monitor. I am not sure how i can display it better. When I tried changing resolution from 1440x900 to others, I didn't make it right, is that the only way? All I want is for screens in this monitor to have larger fonts (all programs, whether its safari, chrome, mail, etc). I should mention I am a brand new mac user.
Info:
MacBook Pro, iOS 5.1
View 9 Replies
View Related
Jul 7, 2007
I just got my MaBook Pro (2.2 GHz and nVidia graphic card). I installed Boot Camp 1.3 and Vista. I have a Benq Monitor 24" with the native resolution of 1920x1080. The MBP is attached to the monitor via DVI.
The problem is that the max resolution Vista allows me to set up for the external monitor is: 1024 X 768. I have tried the original Vista driver from nVidia, but it wont recognize my hardware. Needless to say, that under Mac OS X everything works just fine.
View 8 Replies
View Related
Jul 29, 2009
The resolution on the monitor is 1920 by 1080 and the resolution on my Macbook is 1920 by 1200. Will the Macbook automatically adjust to 1080 or will there be some stretching or otherwise bad quality to accommodate the difference?
I don't have to have the latest and greatest technology, but I do want something that will look nice. I really like the HP monitors for the money and was hoping to get something around this size. I just want to make sure this isn't going to screw up the resolution or anything.
View 1 Replies
View Related
May 8, 2010
I was trying to replace my internal hard drives and the 'Data Cable' seemed seriosuly hard to free, it seems I have tugged it too hard and broke the piece of plastic off surrounding the data connection on the hard drive, now all there is 7 copper(?) looking pins exposed.I can no longer seem to connect the Data Cable back to the hard drive.
View 2 Replies
View Related
May 9, 2009
I installed all of the boot camp drivers. I still cannot set up a wireless connection on my xp after using boot camp.
View 2 Replies
View Related
Aug 26, 2009
Setting up the bluetooth so that I can use my mobile phone to access the internet on my mac. I have an LG phone but there isn't an LG option in the dropdown bar, does LG perhaps have another name that's in the list. Also what do I put in the username, password and phone number sections? I have tried to do it but it has failed.
View 3 Replies
View Related
Dec 26, 2009
I Have a linksys Wireless-G router (Model WRT54G) that's already hooked up to one PC & I'd like to hook my new Mac Pro to it. Is it possible?
View 2 Replies
View Related
Nov 10, 2010
I recently got a new time capsule but I have difficulties setting up the internet connection. The time capsule is connected to our WAN using a cable in my office. The computers in our organization are authenticated using their MAC address. So, I have to add the MAC address of the time capsule to make it connected to the internet. I want to connect the TC to our WAN using a cable, then I want to connect my MacBook using a wireless connection to the TC.
When I config the TC using the NAT mode (Share a public IP address), I can use the internet but I get a double NAT error and TC's LED is yellow. When I config the TC using the Bridge Mode, the led goes green. Anyway, if I connect my MacBook using wireless I cannot reach the internet. I get no error in this case so I don't know what is happening inside the TC. Interestingly, if I connect the MacBook to the TC using an ethernet cable, it works perfectly! I have added all the MAC addresses of the wired and wireless interfaces to the list of my computers.
View 2 Replies
View Related
Sep 1, 2014
Will a MacBook Pro Retina 15” (mid 2014) support the native resolution of 3840x2160 at 60Hz over a Display Port connection?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Sep 7, 2010
I have recently purchased the mini display port to DVI adapter and a Belkin DVI to HDMI cable, to plug into my MacBook & Samsung SyncMaster 2032MW monitor. However when I connect this all up the display resolution is appalling, blurry and doesnt fit the screen. I have tried all the available resolutions turned mirror-mode on & off and its still shockingly bad! Also tried this on my LG TV and still the same. I have a Dell laptop which I connect via HDMI and the resolution is amazing. I thought the MacBook would output the same?
View 1 Replies
View Related
Nov 16, 2010
1440x900 resolution of the new MacBook Air 13.3" screen is simply too high, making everything way too small and straining on my eyes. Is there a replacement LED LCD panel with a lower resolution (1280x800 like the old MBA) that could be retrofitted?
View 24 Replies
View Related
Apr 29, 2010
It is clear there are people who love their high-res antiglare display; the ability to have more pallets open in Photoshop, see more of what you are doing in Logic. However, there is a fair few of us who dislike the high-res because of decreased fonts, smaller graphical interface things.if you had the choice to go for a high-res or normal res antiglare 15", what would you go for?
View 13 Replies
View Related
May 5, 2010
i am using a hackintosh for a week now. I am using it just to get used to Mac OS X because i am switching to a Macbook Pro in a couple months. I switched from PC to Mac officially now. OK, let's come to the main topic of this thread;-At first, my hackintosh couldn't get my gfx card, i couldn't find the driver(kext) so my resolution was very bad. Everything was huge and blurry. I couldn't even look at my 17" Samsung LCD screen. I made an entry to file which was something like this
View 14 Replies
View Related
May 6, 2010
Who has actually played games on BOTH the 2010 high res and standard res macbook pros?Reading through that gaming benchmark thread isn't much of an indicator as most people don't post their resolution and if they have they have only played on one or the other.Im trying to get a better indicator on the performance difference with newer games. Are we talking 2-6 fps drop or 10-20 or more?
View 17 Replies
View Related
Jun 10, 2010
For those who would like to try adapt to hi-res screen of the 15'' but the not sure if they can, if they can't adapt to the hi-res, it's possible to set the resolution to 1440x900 with no appearence differences from the standard res screens?So the appearence and quality of the hi-res screen set to 1440x900 is the same of the standard res screen?
View 4 Replies
View Related
Aug 17, 2010
So i'm trying to figure out the best resolution for using my macbook pro in clamshell mode. I think ever since i installed snow leopard the new resolution choices i have are not longer pixel x pixel, but actual TV resolutions, such as 1080i, 720p, 420p. In the past I've used SwitchResX to do custom resolutions for my tv but that dosnt seem to work anymore.
I'm trying to find a resolution where text is easy to read. 1080i looks pretty but text is extremely small. 720p the text is larger and easy to see but is very fuzzy and not easy on the eyes. I guess this has something to do with the pixels on a tv being farther apart than that of a computer monitor. It's a 32" LCD TV. I'm using a DVI to HDMI cable (Non-Unibody Macbook Pro).
View 5 Replies
View Related
Nov 11, 2009
I've an Internet key (settings requested: phone number/web address/primary DNS): I put only the first 2 because with the third one (needed to speed up the connection) it doesn't works. I put the primary DNS requested on MACUSBmodem (DNS page, on the left).
View 4 Replies
View Related
Oct 4, 2010
1) Having a difficult time finding anything good on this. Anyone got direct comparison pics between the two on the 15"?2) Also how much brighter are the mid-2010 15" displays compared with the late-08 15" displays? IIRC the 2009 screens got a wider color gamut and more brightness than the original unibody screens.
View 24 Replies
View Related
Apr 14, 2010
How does the Antiglare screen look? Does it look cheap and flimsy like the matte screens on the pc laptops?This is my first Mac and i'm looking at going all out and getting the top of the line 15". I know I definitely want the HD screen, i'm just not sure which screen looks better. What about a 5400 vs 7200 rpm hdd? Is this upgrade worth it?
View 24 Replies
View Related
Feb 10, 2009
I have a Time Capsule wirelessly connected to my iMac. Since I've encountered some problems with backups because of intermittent wifi connection failures, I want to switch to a wired connection with an ethernet cable. I know I could fiddle with the wifi channels etc. but since the TC is just sitting next to my iMac anyway, I could profit from the higher bandwidth of a wired connection as well.Two questions:
1. What exactly do I have to do to make the switch? Are there any new settings I have to apply? Create a new network?
2. Will I still be able to use the wifi connection to get on the internet using my smartphone?
View 1 Replies
View Related
Mar 16, 2012
The internal modem in my PowerBook Pro (mid 2010) shows up as "not connected" in the Network pane of system preferences, but I can't figure out how to get it to connect. When I enter my phone number and click the connect button, I get an error message: "Network Connection The communication device selected for your connection does not exist. Verify your settings and try reconnecting." Say what? It says it exists in the System Preferences, shows it in the list on the left. How can it not exist?
Info:
MacBook Pro, Mac OS X (10.6.7)
View 8 Replies
View Related
Jul 5, 2012
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?
Info:
MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
View 5 Replies
View Related
Jan 26, 2010
I recently purchased (as in days ago) a refurbished 13" Macbook Pro. I just noticed today that my wireless connection on my Macbook Pro has been losing it's connection about every other 2-3 minutes. I was on iChat with a buddy this morning, and I must have been disconnected and then reconnected about 8 times in 20 minutes. I first thought it must have been a problem with iChat. That said, I have sat here looking at my screen for the past ten minutes, and I have seen the Airport wireless indicator disconnect and then reconnect again at least three times in the past ten minutes.
I have AT&T U-Verse Service, and I am forced to use their provided 2WIRE router. That said, I have had no problems with any other device that uses the wireless connection, from my iPhone to my PS3. I work from home and have my HP laptop literally sitting right next to my Macbook, and it has not disconnected once from the same wireless connection, whereas my Macbook has literally disconnected at least 20 times.
View 9 Replies
View Related
