Can someone tell me if I could put a ATI Radeon X1650 Pro graphics card in a 800 MHz PowerMac? I know that the PowerMac uses AGP, and that card is agp, so will it work? If it doesent, could you point me out to some cards that will?
I recently just purchased one of the early 2008 Mac Pro Desktops, model number MA970LL/A and am trying to upgrade the video card in it. It comes standard with an ATI Radeon HD 2600 xt, and I would like to upgrade to an ATI Radeon HD 4870. I don't know that it will work though, I know that the NVIDEA that comes standard in the early 2009 Mac Pro does not work in the early 2008 Model. Does anyone have any information on this or know if that will work?
I purchased my Mac a few weeks ago, wanting to both upgrade my computer.......and play Diablo 3. I do always want the best out of my systems and the person who sold me the mac told me it would be fairly easy to upgrade the card...well he was wrong. He also told me a few days later not to worry about upgrading since the system is already great.
I went to a local Mac store and asked about the upgrade and found out it would be close to or above a grand for the part from Apple and the labor.
Are there any other ways to find this part online cheaper and just hopefully pay for the labor?
I just really dont want to pay a grand just to upgrade my damn video card, and I know within the new year Apple will release a much better fast computer and I'll be mad. I really wish it wasn't such a hard upgrade.
I'm worried about too much heat and wearing out fans in both the card and my Mac.Below are the conditions, but first:
-Is it normal for this kind of card to run ALL the time? How do I know if it's acting correctly? -Given the heat and fan speed info below, are my Mac and internal drives OK? -Am I risking any breakdowns? Due to heat or fans running too much... or? -Do all graphics cards cause the fans to run like this? Is there a cooler card out there? -Suggestions to lessen the heat effects... or for another alternative?
Condition: MacPro Xeon / Dual 2.66 processor / 4 GB RAM Radeon HD3870 Card in Bottom slot E-Sata card in top slot. No other cards installed 4 Terabyte Internal Drives
Temperatures (in fahrenheit): (via iStat widget) HardDrives: 110 / 104 / 108 / 97 CPU A: 95 CPU B: 92 Expansion Slots: 95 Ambient: 76
Fan Speeds: Exhaust: 599 CPU Fan: 499 Power Supply: 599 HD/Expansion: 501
I recently read somewhere that I can actually change the graphics card on my mac. If so where can I buy the ATI Radeon 4850 graphics card? and how much will that set me back?And could I get this upgrade done by my local nextbyte retail store?If it is possible to have nextbyte upgrade my card would they send it off to apple? I really just need this card so I can play aoe3 on all settings high and be able to handle games like cod4, quake and all those graphic hungry games.
which XFX model seems to be the best choice for flashing?Mac Mall has this one reasonableXFX RADEON HD 4890 1.0 GB DDR5MacMall Part #: 7933692 Mfr. Part #: HD489XZSFAre there any cards which fit better then others ?
for some reason ATI Radeon HD 2600 XT graphics with 256MB card doesnt support 1920x1200 under windows vista via bootcamp and only picks up the dvi on one of the 2 dvi.
In the tech specs for Mac OS X 10.6 Snow Leopard it only lists the ATI Radeon 4850 and 4870 for supported graphics cards for OpenCL so does this new 4670 support OpenCL? I think it would be pretty silly to have the cheaper iMac with the GeForce 9400M support it but not the next step up with a dedicated card.
I have a late 2009 27" iMac i7 with the Radeon 4850, I am running windows 7 64 bit on bootcamp for gaming. I was wanting to know if anybody has found which is the best performing graphics driver, I am currently using the driver installed via bootcamp 3.0, the driver from bootcamp 3.1 messed up the colour detail (would not display 32bit colours properly). Has anybody found a decent functional driver from ATI or have modded a driver for better performance? Those people who have successfully played top end games at high settings what driver do you use?
. I have a G4 Power Mac running OS 10.5.8. Three years ago I changed my AGP 4X Graphics Card that came with the computer. It was an ATI Radeon 9000 Pro. I installed a new Graphics Accelerator Card Radeon 9800 Pro Mac Edition. For the past three years it worked beautifully with clear sharp 3D imaging. However, on Monday April 26, my monitor started showing vertical and horizontal flickering wavy lines. I thought it was my monitor that went bad, so I tried another monitor from another Mac and it did the same thing. Luckily I kept my old AGP card that I removed. I reinstalled my old card and the monitor is showing perfect with no wavy flickering lines. Can anyone tell me what is the problem? Do I have to buy another Graphic Card? The Radeon 9800 was great for playing games with 3D imaging.
I bought a Radeon 9800 Pro video card form my Power Mac G5 with dual processors. It comes furnished with a power splitter cord and says to plug it into the power supply or hard drive. I cannot find any place where this will plug in. The instructions that came with it are very vague and give no indication as to where this power source might actually be located.
I have an early 2008 Mac Pro 2.8 that came with an ATI Radeon HD 2600 XT video card. I'm thinking about upgrading this to something with 512 MBs of VRAM. What GPU for the Mac Pro is a good value right now?
I'm buying a 27" iMac. I plan on installing windows 7 and running some Windows games on it. I was wondering if anyone could tell me how the performance is on the ATI Radeon 256 MB card. All of the online reviews are for the 512 MB one. I'm not looking for super high performance or what not, but playability and graphics to look decent. Like for example, will Crysis be playable?
I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
first time poster; I've recently acquired a iMac(8,1) and I was hoping to use it to edit video footage. I'm debating whether I should purchase Final Cut Studio. I was told it wouldn't really be worth it unless the graphics card was Dedicated as opposed to Integrated.
I'm not sure if the computers powerful enough to run studio - or perhaps just Final Cut Pro. The Graphics card is a ATI Radeon HD 2400 XT. Is this graphics card sufficient to run Final Cut studio?
I have the stock video card from my g4 mdd 1.42ghz
its 64mb agp ati radeon 9000 1 dvi 1 adc
what i know: the 1 dvi can push relatively big monitors. to make dual display work i need a adc to dvi converter. what I dont know. can this card drive 2 19" monitor maxed out ? (1400x900)?
Will i have any problems running Final Cut Pro with these cinfigurations on my iMac 2009?3.06GHz Intel Core 2 Duo 8GB Memory 1.0TB Serial ATA Drive ATI Radeon HD 4850 512MB Is this "ATI Radeon HD 4850 512MB" graphic card good to run FCP?
I have an '06 Mac Pro and my Nvidia 7300 just sucks, so I'm looking to buy a new card. I saw this, which uses ATI Radeon 4870. How safe is this, and where can I use any Radeon card for this?
I got this Airport extreme wireless card (b/g/n)for the MacPro late 2009. There are 2 inputs on the card and 3 airport(antenna) wires to connect it from the Pro. Which ones do I use?
My daughter has an older iMac (with Firewire, but probably about six years old, it runs 10.3.9) and is adding a new iMac to her home. The older one will be for her children's use, and she and her husband will use the new one. Now for the problem. The old iMac doesn't have an Airport card; one would have to be added in order for both iMacs to have internet access.
1. Where can they find an airport card for this iMac? 2. Where can I find instructions for adding this card to the iMac?
I installed the ATI Radeon x1900 card (512MB) in my 2006 Mac Pro. Can't change resolution- it's at 1200x800 on my 30 in cinema monitor and there is a warning that my video cable needs to be plugged in. There is no video cable, the card just plugs in.
Ok so I have a old Mac Performa 640CD/Dos that I am trying to to get up and running again. I had a monitor for it but it fell off the couch and broke. So I thought maybe I can use an adapter with it in order to use PC VGA monitor. Well after getting the first adapter and trying it, no luck, then I tried one that had dip switches on it. Tried 640 x 480, 800 x 600, almost all the dip switch combination with no luck on getting anything on the screen. Could it be that I might have a bad video card and it needs replaced? Or is this particular model not compatible with PC VGA monitors?
I replaced my macbook pro last week with a MacPro 8 core.
For the last few days the GT120 graphics card was connected to two 24" dell monitors (2407 and 2408).
The 2407 is my main display and was connected via the display port to a display port to DVI-D adaptor and then to the DVI-D port on the screen. The 2408 was connected using the DVI-D on the graphics card straight to the monitor. This setup was great as I couldn't even tell if my mac was on or off because I couldn't hear any off the fans.
The only problem was that when running full screen video (EyeTV/Quicktime), the picture would sometimes stutter. After looking at the apple store website, a new GT120 was �99 for students so I picked one up yesterday.
The original GT120 is in slot 1 and is connected to my 2407 (main display) via DVI-D, the second GT120 is in slot 2 and connect to my 2408 via DVI -D. Now the problem is noise! I can now hear my mac whirring away all night (MacPro in my bedroom).
Any idea what the problem could be? When i run iTunes visualizer, both displays average at about 63fps and there is no stuttering of the picture. One thing I have noticed (using hardware monitor) is that when play itunes visualizer on full screen the GT120 in slot one uses 22% and the GT120 in slot two uses 99%.
Like is having a higher end GPU only good if you play games? Will it still boost the computers performance even if I do stuff that doesn't involve videogames?
I have two issues with my present X1900: it's not going to be OpenGL compliant come September, and more pressingly on a day to day basis, for some reason Eve Online, the game I'm rather addicted to, doesn't like me using two video cards - a stock GeForce 7300 and the Radeon.
I haven't been able to troubleshoot my way to confirming why I have the issue (and I've posted on Eve online forums - no one else seems to have the issue) but I get really odd graphics glitches when I have more than 2 screens 'detected'. Rather, when I have screens on more than 1 video card. I think it has to do with an ATI/nVidia conflict while running a Mac port of the Linux Port of Eve.
So I was hoping to get the 8800 perhaps, but they're getting pretty hard to find. Any other suggestions? Performance-wise I've been happy with the X1900, don't really *need* to upgrade, but I'd like to maximize OpenGL and solve this confilct issue so I'm not constantly climbing in behind my desk to unplug and replug DVI cables - I now run 3x monitors and a projector.
Price counts for me, I'd like to keep this upgrade as cheap as possible - don't use 'Pro' apps. I'm not afraid to flash a PC card if there's decent instructions around somewhere. This is actually a PC X1900 with a custom fan/heatsink fitted (Xcellero X2 or something? It's been a while).
I have a 7300 gt in my Mac Pro 1,1 and I am looking to upgrade. I am planning on getting a pc card and flashing it but am wondering what is the best card the Mac Pro 1,1 can handle. Should I just stick with the Ati 4870 or can I go bigger.
