Applications :: Word 2008 Find And Replace Page Break
Feb 15, 2010Is there a way for me to find a page break and replace it with paragraph instead in Word 2008?
View 4 RepliesIs there a way for me to find a page break and replace it with paragraph instead in Word 2008?
View 4 RepliesSo, I'm still new to the whole Mac OS X happening, just got my MacBook about three of weeks ago (very happy with it ^__^). But, there's this little problem. I'm now using Microsoft Office 2008, and I often use Page Breaks. Previously, on the windows computer I used, I could simply press ctrl + return to insert a page break, but this is not a standard shortcut in the Mac version.
My solution - or at least, I hoped it would be a solution - was to use a custom shortcut for Microsoft Word via the System Preferences. I would like to set it to either ctrl + return or cmd + return, but it doesn't work.. However, when I try a shortcut like ctrl + cmd + down - or really anything without the return key - it works just fine. So, here comes the actual question; Is there any way to incorporate the return key within the shortcut?
Ohh, and now another problem comes in mind, I've got this Video_TS dir on my HD from a dvd which I tried to open, but when it's opened it simply 'plays' the menu. So I'm unable to actually select the option from it, and it simply goes to other part - like chapter selection - afterwards.It also plays little bits of the files, hangs for while, and skips a bit, then repeats the cycle.Anyone familiar with it? I use VLC Player Open Disk... with the Video_TS folder option.Ohh, and the files play fine on the windows pc next to me.. I realise this last question maybe should be in another topic, or has already been answered somewhere on the forum. But I did do a search for the first one, and couldn't find any information on it.
Basic explanation: I am creating a Word document (letterhead) and want to anchor text on the left side of the page so it does not flow to the next page.
In-depth explanation: I use Word 2008 for a Mac, and the document I'm creating is for an "electronic version" of our letterhead. The idea is to have a template on which workers can type their letter but the graphics/text of the letterhead shell do not move. I've created the header/footers but now need to find a way to lock text on the left side of the page (contains our addresses, contact info, web address, etc.). Again, I don't want these components on this "template" to move text is typed on the page.
The Automator integration with Word 2008 is very useful, but I've discovered a snag I'd like to find a workaround for. I'm using Mac OS 10.5.5.
I want to find and replace all the text in Word documents I create, including the footnotes, headers, and footers, but the 'Find and Replace Text in Word Documents' Automator action will only find and replace in the main body. This severely limits its functionality. Is there any way I can get round this?
I'm happy to use an Apple Script if this would do the job more effectively, but don't know the required code. I used to have this function working fine with macros in previous versions of Word, but I'm stumped by the new version.
So, I'm still new to the whole Mac OS X happening, just got my MacBook about three of weeks ago (very happy with it ^__^). But, there's this little problem. I'm now using Microsoft Office 2008, and I often use Page Breaks. Previously, on the windows computer I used, I could simply press ctrl + return to insert a page break, but this is not a standard shortcut in the Mac version.
My solution - or at least, I hoped it would be a solution - was to use a custom shortcut for Microsoft Word via the System Preferences. I would like to set it to either ctrl + return or cmd + return, but it doesn't work.. However, when I try a shortcut like ctrl + cmd + down - or really anything without the return key - it works just fine. So, here comes the actual question; Is there any way to incorporate the return key within the shortcut?
Ohh, and now another problem comes in mind, I've got this Video_TS dir on my HD from a dvd which I tried to open, but when it's opened it simply 'plays' the menu. So I'm unable to actually select the option from it, and it simply goes to other part - like chapter selection - afterwards.It also plays little bits of the files, hangs for while, and skips a bit, then repeats the cycle.
Anyone familiar with it? I use VLC Player Open Disk... with the Video_TS folder option.Ohh, and the files play fine on the windows pc next to me.. I realise this last question maybe should be in another topic, or has already been answered somewhere on the forum. But I did do a search for the first one, and couldn't find any information on it.
how to change the page order in Microsoft word 2008?
View 1 Replies View RelatedI have been working on a template where I have placed a two column table on the front page, left side being for a graphic for a letterhead, and right side column for text.
My problem is that on the second page, I would like the document to continue on without any table. I would like for the text to flow from the table into regular margin document on the second page. Is there a way to do this?
when I press command enter it doesn' give me a page break on word Do i need t o activitate keyboard shortcuts?Â
View 1 Replies View RelatedSending out the same e-mail message to 100 different people, but I want to customize the e-mail to their first name. Is there any program that you can upload a text list or Excel list to and it will do this automatically and create the e-mails in your drafts folder? Don't want to use a online sending service because they put crap at the bottom of the e-mail and recipients know it's automated.Want the people to think it's not something automated.Also, I know there's a way to schedule delivery of a message for a future date in Apple Mail via Apple Script, but you seem to have to schedule one by one. Any watch to do a batch scheduling?
View 3 Replies View Relatedwhen i create a PDF file of my *.docx in Word 2008, I get a 'strange' PDF. This happens wether I use the "Save as PDF..." from the print dialog, or save the file as a PDF from Word's own "Save as..." dialogue.
Opening the PDF in either Preview or Adobe Acrobat works just fine, and the PDF looks just like I want it to be, but whenever I mark some text, a whole range of text is marked.
Thus it is impossible to mark just a single line/word/character and the produced PDFs are useless in my line of work, since I need people to mark text in them and post comments.
Interesting facts:
1) When I "Save as PostScript..." from Word 2008, then open the *.ps file in Preview and save as PDF from there, everything is fine.
2) Printing to PDF via print dialogue -> "Save as PDF..." produces perfect PDFs in any other Program (such as TextMate), also with selectable text.
Word 2008 is driving me crazy. I'm writing a thesis, very basic, no strange graphics or whatever, but the damn thing crashes a lot of times. I have the latest updates and have done a few uninstall/install cycles + usual mac stuff (delete preferences, repair permissions) but to no avail. How does it work for you ? When I used the 2004 version it run much smoother. I could switch back, but while Office 2004 came from "unknown" sources I have a legal purchased copy of Office 2008 which I'd like to use.
View 11 Replies View RelatedHow can I set up Word (Office 2008) to keep my toolbars always showing in the head of the page? When I close my Word and open it again. My toolbars aren't there!
View 5 Replies View RelatedWhen I open up a new word doc (doc 1) and start typing randomly with loads of spelling errors the little red line does not appear under the mis-spelled word. When I Manually select spell check it tells me that there are no mistakes even though there blatantly are. If I open up a new blank doc (doc 2) and begin typing away again the same mis-spelled words, the red lines appears as it normally should. This is where it gets weird.......In doc 2 if I go into preferences>spelling and grammar, The boxes, "check spelling as you type" and "always suggest corrections" are ticked under both the spelling and grammr sections. If I then go into the same preferences for doc 1 the same boxes are ticked under the spelling and grammar sections however the grammar section is greyed out so I can't change the settings.
I am currently typing my thesis so having a wacky spell check is driving me insane. What I have been doing is opening a new doc then opening another new doc (doc 2) and typing in that however I have also noticed that the spell check doesn't always seem to work.
First, I understand that the green button maximizes the window to fit the contents. Here is my problem...
Word maximizes the window as though the view is set to 100%. When I use Word, however, I always have the view set to 125%. So, when I maximize the window, it acts as though the view is set to 100% and some text gets cut off.
I hope that made sense - It's really more of an annoyance than anything.
Also, why does the green button maximize to full screen for some apps (e.g. firefox), but not others? I swear it has a mind of its own!
Is it just me or is Word 2008 unbearably slow to launch? I can load every application in Adobe CS3 suite in the amount of time it takes Word to open itself.
I say this not to merely bash Office, as both Excel & Powerpoint both launch very quickly. Word on the other hand...
Has anyone else noticed this and been able to speed things up? I'm extremely hesitant to download any updates from Microsoft in an attempt to "fix" problems, especially after reading some of the comments on this board
How do I create a folder for my documents in Word 2008. It was on the "save as" dialogue box in previous versions but I can't find it in the newest version.
View 2 Replies View RelatedWhenever I try to use the spell checker in MS Word for Mac 2008 the "add" button is grayed out. I have verified the U.S. English and other settings yet the app does not allow me to add a word.
View 2 Replies View RelatedI've recently switched from Word for Windows to Word for Mac (2008), and I'm having trouble figuring out how to "tab over" text in tables in the Mac version. In the Windows version, Ctrl + TAB works, but I haven't figured out the equivalent command/key combination for the Mac version.
Setting tab stops in a table cell is a breeze, but figuring out how to use these stops has proven to be more of a challenge for me.
I've looked all over, and I can't find out how to use find and replace to change the font properties of certain words. Like say I wanted to change every instance of the word "dog" to a bigger font size. You can do this in MS Word, anyway you can do it in Pages?
View 1 Replies View RelatedI need to find and replace several strings of txt across ~ 70 documents. I have Textmate, but is it not possible to do this? I can't seem to figure it out.
Is there another app I should use?
How do you do a Find and Replace in Pages when you want to change the color of the font. For example, for every instance of the word Apple, you change it to BOLD and in RED. Changing the style is no problem but changing the color is. You can do this easily in Microsoft Word.
View 2 Replies View RelatedI can't figure out how to print multiple slides on a page. On Windows I would just select print preview and then select handouts... done. Now I have no idea how to do such a simple task. I figured it out, but I have another question. Say I wanted to print 4 slides to a page. How do I make these slides larger?
View 1 Replies View RelatedI have a Macbook Pro, just for home use. I noticed this 'Shared' access in Finder recently. It could have appeared after linking a new GPS device I got via a USB cable although it still appears without this being connected and after re-booting.I'm concerned over the security of my machine - does it mean someone has access to my Macbook Pro? I can't find any way to break the connection.
View 5 Replies View RelatedI'm having a problem with line spacing and images in Word 2008.
I've taken a few screenshots to illustrate the problem.
As you can see, the line spacing is awkward. There's no enter between these lines, but for some reason there's a lot of space between them.
Now this is what happens when I nudge the caption of the image on the left upwards.
The spacing is fixed! But now my caption is in front of my picture, which, obviously, isn't what I want..
Anyone have a clue as to how to fix this?
I used a standard resume template in Word 2008 Mac that is not displaying properly in Windows. Here is a brief description: On my Mac: The document is perfectly formatted and displayed on 2 pages. On my PC: With ".doc" format, my name doesn't appear. In its place, I have yellow text that reads "address blocked". Additionally, the text spills onto a third page, even though the font, font size, spacing, etc. is all the same.
I then tried saving the document in ".rtf" format, and while my name did appear, the text still spills onto a third page. I cannot fit all the text (in a Windows environment) without cutting out important content. I'm so thoroughly pissed off with this. There should be no compatibility issues in this case because I'm using a STANDARD resume template that came with Word '08. When I saved the document, I made sure to select the "windows friendly" option.
My spell check is completely broken. It wont correct or highlight misspelled words. I cant even go into the spell check preferences (it's just grayed out). And there's no spell check item in the toolbar, or menu bar.
I came across this thread but the method explained there did not work for me. Does anyone know what could be wrong?
I accidentally trashed two of my icons on my icon bar I didn't put them in the trash but when I clicked them they turned into wads of trash. I don't know how to find them now?
Info:
MacBook, Mac OS X (10.5.8)
I have been trying to get Microshaft word 2008 for Mac to start page numbers only on page 3.
I have a title page, a table of contents, and then the body of my document.
I have created a section at the bottom of the table of contents. Then in the footer, to the next section, I have tried to insert page numbers. BUT it routinely adds page numbers to the bottom of the first section as well. SO I have page 1 on the title page, page 2 on the table of contents; then I have page 1 on the first page and so on.
Does anyone know how to make a clickable table of contents in Word 2008?
View 6 Replies View RelatedI am not sure if this is possible but cannot find an option for it;
Is it possible to adjust the header/ footer side margins independently from the main body's margins?
I know you can adjust the margins for 'header from top' and 'footer from bottom', but I would like to have my header to go right to the edge of the page instead of remain within the 3cm from edge margins I have set for the main body.
Another question if anyone can help is how can I write in a header say, Mr.Brown on the left hand side and on the same line, but on the right hand side, write the date?