I own a Macbook Pro and today I realised that it wasn't reading any DVDs. It has read them before in the past but it won't now.
Whenever I put the DVD in it waits for a while making it's regular sounds and after about a minute it ejects it, doesn't even read the disc or anything.
The drive in my G5 tower will read/write commercial or blank CDs and will read/write blank DVDs, however, it will not read most commercial DVDs. When I insert them it tries to read it then after a few seconds it just spits them back out. Occasionally commercial DVDs will read and mount fine, but this seems to be rare.
Information:
Mac OS X (10.4.10)
The disc player in my iMac doesn't seem to be able to read any dvds and then spits them out. What could the problem be?
Info:
iMac, Mac OS X (10.7.3)
Since LION's installation and as a consequence the upgrade of QT player to release 10.1 I am not able to read any . MOV from my Canon Camera.I can perfectly watch it in iMovie or Aperture.
Info:
iMac, Mac OS X (10.7.2), Quick Time Player 10.1
Okay...so I'm literally going crazy. My father ripped a bunch of dvds of mine using his pc (I haven't converted him...yet!) with DVDfab Platinum. I'm working on backing up my movies on hard drive and I have tried to rip them to my Macbook with MTR as well as burning them with Popcorn.
I have never had any difficulty with either program except when it comes to trying to re-rip these dvds copied on pc first.It doesn't seem logical that this can be a pc to mac problem...but who knows? MTR shuts down immediately when trying to rip the movie. Popcorn won't burn the TS file from the DVD or an image file of the DVD. I'm lost. Does anyone have any suggestions...?
I have unusual, although not debilitating issue with DVDs made on a white 13-inch MB (MB2,1, mid-2007, 2.16GHz, 2GB RAM, SuperDriveDVD=Matshita DVD-R UJ-857E) running Tiger 10.4.11 which cannot be read on a MBPro 15.4-inch (MBP4,1, early-2008, 2,4GHz, 2GB RAM, SuperDriveDVD player=HL-DT-ST DVDRW GSA-S10N) running SnowLeopard 10.6.4.
The DVDs were burned, a couple of years ago, on the white MB and contain a copies of files from my user (administrator) directory, mostly iWork and MSOffice files.
I am able to read the contents of the DVDs and open the individual files on the white MB but not on my MBPro: when I insert the disk, a finder window appears saying I have inserted a blank DVD and asks me how I wish to proceed in using it.
There many ways to recover the files, not least using the MB I created them with, but I would like to understand why this is occurring. Anyone have any ideas?
when i insert dvd my macbook can not read it and considers it as blank
Info:MacBookPro, Mac OS X (10.7.3)
The cd drive hl-dt-st dvdrw gsa s10n won't read cd or dvds. Spins and ejects.
View 6 Replies View Relatedmy ibook doesn't read dvds anymore like it used to, but it will read blank ones if i use an external dvd drive, but when i try and insert a normal dvd (ive tried a lot of dvds so its not just one disc) in the laptop drive or the external one, it says "The disk you inserted was not readable by this computer." and gives me an option to ignore or eject.
i tried creating a new account, but the same thing happened, so i used my install disks to install mac os x on an external drive and booted from that and the disk worked! but, ive got lots of important data on the laptop drive, so im stuck here.
I have Windows XP 32 bit running under bootcamp on my early 2008 Macbook Pro.
I think the problem started last week, when I was burning about 4 isos on 4 different DVDs. Then after that I wanted to watch a movie on a dvd while I was still on Windows, but whenever I start the movie the mouse pointer would move slowly and the movie would get choppy. Even when I'm transferring files from a CD to Windows the files would take longer than usual to finish copying.
So I switched to Mac OS and tried playing the movie again from the dvd. When it played I noticed that it's playing normally and it's not a hardware issue that I'm having. So I thought that the problem was gone and I should check if the dvd would run smoothly on Windows like it's running under Mac OS. But when I tried it on Windows the problem was still there, the dvd is still running slowly.
I am running OSX 10.7.3. Yesterday all my thousands of fonts completely disappeared from Suitcase Fusion 2. I was told by Extensis that I could not get them back, but that I needed to upgrade to Fusion 3 which would be compatible with Lion. I did that. When I tried to get my stored fonts off the CDs and DVDs I'd stored them on all the CDs appeared to be blank and I got a message on the DVD that it cannot be read on my computer. (I have used all these CDs and DVDs before.)Â
Info:
Mac Book Pro, Mac OS X (10.4.8)
I am a graphic designer and often supplied with photos from the photographer after a shoot. My computer Intel Corei7(2009), running 10.6.8 with OPTIARC DVD RW AD-5680H drive, shows the disk as a blank disk (even in disk utility). Other older Macs available to me read the disk just fine. current disk that cannot be read: recordable memorex dvd-r?
Info:
iMac, Mac OS X (10.6.8), 27" 2.8 GHz Intel Core i7
I burned a DVD from a disk image using Disk Utility.I tried loading the dvd on several PC's, but they will not load or read.
Info:iMac, Mac OS X (10.6.8)
Whenever I put dvds in my mac pro, the computer says that dvds are not readable. But I could play those dvds with my friend's mac. But CDs are readable and my computer totally works fine with CDs. How can I make my computer be able to read dvds?
Info:
Mac Pro
I have a 2009 2.0 C2D Mac Mini that I upgraded to 4 GB RAM from the standard 1 GB RAM. It does not read CDs/DVDs or any other optical media. When I check the profiler for the SATA connection, I get:
OPTIARC DVD RW AD-5670S:
Model:OPTIARC DVD RW AD-5670S
Revision:2AHF
Native Command Queuing:No
Detachable Drive:No
Power Off:No
Async Notification:Yes
When I check the profiler for disc burning, I get:
OPTIARC DVD RW AD-5670S:
Firmware Revision:2AHF
Interconnect:ATAPI
Burn Support:Yes (Apple Shipping Drive)
Cache:2048 KB
Reads DVD:Yes
CD-Write:-R, -RW
DVD-Write:-R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:Insert media and refresh to show available burn speeds
It seems the controller is good and is seeing the DVD drive, but it just won't read anything included DVD movies and CDs that I bought off the shelf.
I'm having issues with burning data DVDs on my Mackbook Pro (running Snow Leopard) I'm burning large files (DVD/Blu-Ray rips) and the discs are unreliable. I'm trying to pinpoint the problem but haven't been able to. Some of the discs are not able to be read by the Mac - sometimes it spits the disc out a few seconds after being inserted...other discs just spin and spin and spin and it seems the Mac cannot read them - I can't even eject them without rebooting the computer. There seems to be no rhyme or reason between discs that read OK and discs that don't. Some discs were burned via the internal superdrive and some via a Sony USB dual layer burner. All discs burn and verify OK - there was no indication on any of them that anything went wrong. I am using Sony and Memorex discs, single and dual layer. Are there any known issues with either the Mac superdrive, or the burning of large (4+ GB - almost 8 GB) single files? I've got a good number of discs here and like I said all burned OK...but I've been having to go back to retrieve files and am only now finding that some of the discs are giving the problems described above, which means many of the backups I thought were legit are no good. Alternatively, if there is a better method for backing up these files . They are stored on hard drives being used by a streaming video player. I thought backing up each file to DVD would be a reliable backup method but apparently this is not the case. It's not ideal to back up to other hard drives - there are too many files and it would be too expensive. I don't know that online backups would be feasible because of the amount of time it would take to upload them and the space they would take up would likely be too expensive to maintain.
View 1 Replies View RelatedEver since I updated my '10 Mac Pro to Lion (months ago), my original built in superdrive will not read any DVD's or CD's, commercial or not, that have data on them... It simply assumes the disk is blank when it clearly isn't. Now, if I insert a blank DVD and burn it, it works like a charm... but it will then NOT read the disk that it just burned??? How and why did Lion break my superdrive?
Info:
Mac Pro, Mac OS X (10.7.3)
my 2009 13" MBP (OS X 10.6.8, Optiarc DVD RW AD-5960S) won't accept some purchased/rented DVDs. The drive makes funny noises (mrrrrrp-mrrrrp....) for 1-2 minutes and then ejects the DVD. The DVD cannot be ejected manually during that time.OS and software are up to date, lens is clean, hardware has been checked, same DVDs will play on my linux box, on stand-alone players and on several win boxes. The problem occurs with some DVDs only (1/3 of all rented/purhased DVDs). Some won't play in 9 out of 10 tries and then suddenly will.Is there a solution for this?
View 10 Replies View RelatedSpecification:
10.8.8
2.53ghzÂ
Macbook pro won't read any dvds. It ejects all dvds automatically after trying to mount them in a minute or so. It can cope only with cds but very slowly and while reading makes unfamiliar noises.
Info:
MacBook Pro, Mac OS X (10.6.8)
My dvd player decided to crash when I play certain dvd's and works for others. I am currently using the newest version of snow leopard.
View 1 Replies View RelatedI've been having problems with my iMac recently, more precisely with my DVD drive. I think it's a software problem, and no mechanical problem. Let me explain:Â
When I insert a DVD:
- it will sometimes work perfectly. I can read, burn or whatever I feel like…
- it will sometimes not work. I don't know why, but the drive gives a few try (mechanical noises), and than ejects the DVD. If I try a few more times to reinsert it, it will sometimes just keep the DVD and not eject it, without recognizing it. When I try to open the Disk Utility program, it will simply froze. Or it will open after 5 minutes, but the DVD player will not exist and not appear.Â
I need to restart the computer. Sometimes it will work after the restart. Sometimes not. It's really random, and I haven't found out on what it depends… Sometimes, when I reboot it because of a trapped-unrecognized DVD, the DVD player will not open. "Initialization error [-70012]"…Â
I've tried Option-Cmd-P-R at the Start, but it didn't help… I feel like there's something wrong with the software.Â
It's a 2 years old iMac, using Snow Leopard (Mac OS X 10.6.8).Â
I've tried looking on the net, but a lot of people are experiencing mechanical problems (it simply never works), which I think is not the case here (it does randomly work perfectly).
Info:
iMac (24-inch Early 2009), Mac OS X (10.6.8)
Nothing appears on the desktop, and the DVD doesn't play (this is the second DVD I've tried). The drive works to download software though. These are commercial DVDs from Lovefilm in the UK - there are bound to be some scratches - does this mean I can only play new DVDs?Â
Also, if I click Finder to eject the DVD, the command is light gray, meaning the IMAC has not actually registered that there's a DVD in the drive, so I have to log off and on again for the DVD icon to appear on the desktop, at which point I can eject it. However, if I click it, it doesn't play. I'd really like to play films if I can.Â
I don't know what operating system I have, except that it's MAC OS X. I only just got it new two days ago.
Info:
iMac
I am trying to restore my MacBook Pro, but when i insert the OS install disc, it just spins and spins and spins, tells me the disc is blank, and ejects it. I tried using other installation discs (MS Office, Adobe Creative Suite, Final Cut),and had the exact same result. My drive will play DVDs without any problems. What do you suppose is wrong? I have tried resetting the PRAM and SMC to no avail.
View 1 Replies View RelatedWhen I connect my external hard disk (Maxtor) to my Mac Book Pro, I am not able to copy/transfer files to it, though I can copy from it to my Mac. How do I change the permissions from Read Only to Read and Write?
Information:
MacBook Pro
Mac OS X (10.5.6)
have in the past few weeks uprgraded from tiger to leopard.Everything has been ok but i think i might have deleted some vital part of Quicktime player when i tried to clean up.I only realised this when i decided to get Quicktime player pro which i have paid for and have the key..I have tried to download quicktime from apple support website and just about any other website for that matter but zero.zilch.Installer takes me through the process but i get no player.
I have tried to remove all components of quicktime but to no avail.the download intalls but goes nowhere.Have tried to maybe 'jumpstart' it by double clicking quicktime time movies but there is just nothing going on.
Model Name:PowerBook G4 15"
Model Identifier:PowerBook5,8
Processor Name:PowerPC G4 (1.5)
Processor Speed:1.67 GHz
Number Of CPUs:1
L2 Cache (per CPU):512 KB
Memory:2 GB
Bus Speed:167 MHz
Boot ROM Version:4.9.5f3
I'm a longtime PC user who just got a macbook. I copied all my picture files to my macbook and opened up iPhoto. I used the "Import to Library" option to load all my pictures. I noticed that iPhoto copied all my photos to a Photo Library file under the Pictures folder.
Why does iPhoto make copies of the pictures and store them in a separate "file"? This makes it confusing because I have all the pictures that I originally copied but then when I'm in iPhoto, the program is actually accessing the pictures from this separate location.
- Is iPhoto not able to just read files from a normal folder structure?
- How do I manage/organize individual picture files if I'm not within iPhoto?
- How do I burn picture files to a CD/DVD if I can't see the individual pictures when not in iPhoto?
On my Mac, ALL of my emails have been marked as "read." However, while my AOL account syncs fine, my Gmail account's messages must be "read" individually on both ends.
View 4 Replies View RelatedI use Toast to burn DVDs. But recently my MBP Superdrive has been refusing to play ball. Whenever I insert a DVD and set up Toast to start the burn, I get:
Sense Key = MEDIUM ERROR
Sense Code = 0x73, 0x0x
I also own an external DVD/CD drive (USB2) which I use with my little ASUS. So, I plugged my external drive into my Mac and tried Toasting again. But:
Sense Key = MEDIUM ERROR
Sense Code = 0x73, 0x03
So, either my Superdrive is fragged, or my external drive is fragged, or both. But the external works fine with my ASUS. And it sounds like a longshot both are fragged with the Mac. Maybe the DVDs I'm trying to burn to are fragged. Or it's a software glitch in Toast. Or....
my Superdrive is fragged for writing. Other posters have had problems with their Superdrives too. BUT my external is fine. So it must be either Toast or the DVDs, right?
Since using vlc player i have found no need for wmp so i dropped it into appcleaner and now i can't empty my trash bin i keep getting errors when i click on empty trash.I keep getting messages (see below) how can i get around this can any one help i have tried using the option key when deleting but it hasn't worked tho.
View 8 Replies View RelatedInstalled Snow Leopard about a month ago and QT worked fine....now when I double click it won't open.
View 2 Replies View Related
